Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.9 LAccepted-AOC RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹31.0 L+₹6.1 L (24.5%)Rejected-Finance CITI COMPLEX KALAPAHAR GUWAHATI 781016 ASSAM | GUWAHATI | KAMRUP METRO | ASSAM | 781016 | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | L3₹32.3 L+₹7.4 L (29.6%)Rejected-Finance A 3 257 2ND FLOOR JANAKPURI ASALATPUR ROAD JANAKPURI WEST DELHI DELHI 110058 UDYAM DL 11 0007281 | WEST DELHI | DELHI | 110058 | L3 | Rejected-Finance HIGH BID VALUE | |
| 4 | L4₹38.8 L+₹13.9 L (55.9%)Rejected-Finance GANGA NAGAR NEAR TUSHARCHAKRA MISAMARI 784506 | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance HIGH BID VALUE | |
| 5 | L5₹43.0 L+₹18.1 L (72.6%)Rejected-Finance SATGOAN BAZAR NEAR BUS STAND GUWAHATI ASSAM 27 | KAMRUP METRO | ASSAM | 781001 | L5 | Rejected-Finance HIGH BID VALUE |
Tender Value
₹43.7 L
EMD Value
₹87,340
Closing Date
11 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL GANESH ZAPE
HQ CWE TENGA PIN- 900194 C/o 99 APO
PROVN OF CHARPOYS FOR VARIOUS UNITS UNDER GE MISSAMARI.
2022_MES_538110_1
8294/E8
Open Tender
Civil Works
Item Rate
180 days
GE MISSAMARI
D d(i)
8 documents required · 8 mandatory
₹500
GE MISSAMARI
₹87,340
Yes
12 Sept 2022
14 Jul 2022
19 Aug 2022
14 Jul 2022
11 Aug 2022
29 Jul 2022
Amount
Manufacture and Supply of BED HARD STEEL, complete all as specified and directed and shown on Drg No. (FD-/E6/MAP/08(R). Specification :- Overall size shall be 2050mm x 900mm. The head and foot board shall be 800mm & 500mm high respectively. The long rails shall be 65mm x 25mm x 18 Gauge rectangular MS tube. The frame of head board and foot board along with logs shall be of 38mm x 38mm x18 gauge MS tube and rubber shoe of best quality should be provided on the bottom of the legs. 18mm x 18mm x 18 Gauge MS Tube shall be provided in the inner of head board / foot board frame as shown in drg. One stiffener of size 25mm x 25mm x18 gauge shall be welded between the two legs of head board over 150mm from the ground level. Four equidstants stiffeners of 25mm x 25mm x18 gauge MS Tube shall be provided between the two long rails. The extreme stiffeners shall be 150mm away from the head and foot board respectively. All steel surfaces shall be spray painted with two coats of black synthetic enamel paint over a cot of red oxide zinc shrome primer. 18/19mm thick walnut shade. PVC edging, exterior grade, both side laminated Pre-laminated particle board shall be provided on head and foot board duly screwed to 20mm x 45mm x 3mm thick MS strip as shown in drg. The top of the bed hard shall be of 12mm (7 ply) thick BWR grade, IS 303 plywood of approved make fixed over the four stiffener to level with the top of the long rails as 400mm high from the ground level. Rest all as specified and as directed by Engr-in-Charge.
Manufacture and Supply of CHARPOY MS TUBING WITH PLYWOOD TOP, complete all as specified and directed and shown on Drg No. (CWE/TEZ/04). Specification :- Overall size shall be 1980mm x 900mm. The Head and Foot Board shall be 640mm & 540mm high respectively. The long rails shall be 65mm x 25mm x 16 Gauge with four equidistants stiffeners of 25 x 25mm square tube x 16 gauge. Legs shall be of 32 x 32mm square tube of 16 gauge with two stiffeners of 25 x 25 x 16 gauge on each side welded at 150mm from ground level including 04 Nos FI clamp made out of 150 x 3mm as shown on drg and the bottom duly end with 50x50x6mm thick MS plate welded to each leg as shown on drg. The Top of charpoy shall be of 12mm (7 ply) thick BWR grade. IS 303 plywood of approved make fixed over the four stiffener to level with the top of the long rails as 440mm high from the ground level. Both side prelaminated particle board of 18/19 thick exterior grade having both side shall be fixed to the framework as shown on drawing. All exposed surfaces of steel framework shall be spray painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer of approved quality. Rest all as specified and as directed by Engr-in-Charge.
KIRAN REED INDUSTRIES
Capital Construction Company
M/S K.K.TRADERS
LAXMI & GANESH ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .