Construction of toilet blocks at GHS Ozari-Pernem and GHS Chandel- Pernem under CSR for FY 2021-22

Amount

BOQ 2- Amount excluding applicable tax

BOQ 3 - Applicable GST

Description of Work / Item(s)

Amount

(Govt High School Ozari -Pernem - Item no. 1 to 43) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Hard rock

Filling available excavated earth (excluding rock) in , plinth, sides of foundations etc. in layer consolidating each deposited layer by ramming and watering .All labour and material etc. complete.

Soling with hard laterite rubble stone of 20cm to 30cm size including hand packing, spreading murrum, watering, laying to necessary compacting etc complete with all tools, plants, labour and materials.

Providing and laying plain cement concrete (1:3:6) using 20/40mm graded black trap stone metal out of quarried boulders as coarse aggregate including mixing, depositing, consolidating, levelling, curing, etc. All tools, plants,labour and materials complete.

Constructing masonry in foundation and plinth using precast cement concrete solid blocks having a crushing strength of not less than 70kg/m2 (28 days curing) and a mix not leaner than (1:5:10) in cement mortar (1:6) including providing specially moulded blocks at junctions and corners, curing etc complete with all labour and materials.

Constructing masonry in superstructure using precast cement concrete solid blocks having a crushing strength of not less than 70kg/m2 (28 days curing) and a mix not leaner than (1:5:10) in cement mortar (1:6) including providing specially moulded blocks at junctions and corners with all scaffolding lift ,raking out joints curing etc. complete with all labour and materials.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,chamber covers bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with GI binding wire all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Make SAIL/JSW

Plastering with cement mortar (1:4) 15mm thick in single coat for internal surfaces of walls including curing etc all labour & material etc. complete. All labour & material etc. complete

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

15 mm cement plaster on inside wall finished with a floating coat of neat cement of mix :for septic tank.

Providing and laying Ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours including cutting, cleaning, curing, filling the joints with white cement mixed with suitable colour pigment, on 20 mm thick Cement Mortar 1:4 (1 Cement : 4Coarse sand) etc. complete with all labour and materials.(Kajaria, Johnson make) (Basic rate of Rs.500/- per Sq.mtrs)

Providing and fixing ceramic glazed wall tiles of Johnson / Kajaria /Nitco-make/shade approved by GSL and 300x450mm size laid in skirting/dado with 1:3 cement mortar/cement paste as per requirement including cutting,making holes, cleaning, curing, filling the joints with white cement mixed with suitable colour pigment/special grout, etc complete with all tools, plants, labour and materials complete.(Basic Rate Rs.600/M2)

Supplying and fixing water supply lines using approved make/quality CPVC pipes of various dia and jointing with pipe specials such as bends, tees, couplings, elbows, Unions, reducers etc.including earth work excavation /dismantling masonry/PCC,making chase in wall and finishing the same complete with all tools, plants, labour and materials. 20mm dia - Astral/Ashirwad

Supplying and fixing water supply lines using approved make/quality CPVC pipes of various dia and jointing with pipe specials such as bends, tees, couplings, elbows, Unions, reducers etc.including earth work excavation /dismantling masonry/PCC,making chase in wall and finishing the same complete with all tools, plants, labour and materials. 25mm dia -Astral/Ashirwad

Supplying and fixing waste water lines using various dia PVC/SWR pipes of Prince/Finolex or any other approved equelent make and jointing with pipe specials such as bends, tees, elbows ,plug etc.including earth work excavation /dismantling masonry/PCC ,making chase in wall and finishing the same complete with all labour and materials. 65mm

Supplying and fixing waste water lines using various dia PVC/SWR pipes of Prince/Finolex or any other approved equelent make and jointing with pipe specials such as bends, tees, elbows ,plug and other fittings etc.including earth work excavation /dismantling masonry/PCC ,making chase in wall and finishing the same complete with all labour and materials. 110mm

Providing and fixing angualr cock of approved quality : Jal/Ark/plumber/hindware/Belved make

Providing and fixing bib cock of approved quality Jal/Ark/plumber/hindware/Belved makmake with all tools, plants, labour and materials.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests - make Hindware/cera/parryware

Providing & fixing wash basin of vitreous china 550x400mm make -Hindware/cera/parryware with all accessories such as C.I. brackets,waste coupling,rubber plug,C.P. brass trap with 8cm deep seal with wall flanges, 12mm P.V.C. plastic pipe with necessary inlet & outlet connection, long neck pillar cock jal/Ark/plumber/hindware make -waste coupling incl.sealing around the wash basin with white cement ,paiting brackets etc.all tools, plants, labour and materials complete.

Providing and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of EPEE make required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames with hinges. complete with all tools, plants,labour and materials.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of EPEE make cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete with all tools, plants,labour and materials.

Providing and fixing bright finished ss latch with necessary screws etc. complete : 300x16x5 mm

Providing and fixing bright finished ss Aldrop (250mm)with necessary screws, etc. complete.

Providing and fixing bright finished ss handles with screws etc.complete. Size- 150mm

Providing and fixing of RCC jali for the ventilator in toilet area of size 40 x 60 cm etc. complete with all labour and materials

Providing & fixing soap dish with bracket and container all labour and materials etc. complete.

Providing and fixing 600 x 450 mm mirror of superior glass (of approved quality) bevelled mirror polished edge with back support fixed to wall all labour and materials etc. complete.

Structural steel work using TATA/SAIL/VIZAG/TISCO/JSW by Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with paint of approved brand and manufacture

Providing and fixing precoated galvanised iron profile sheets (TATA/JINDAL)(size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %), total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.All tools, plants, Scafolding,labour and materials.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying primer coat for distemper of water thinnable cement primer of approved brand and manufacture on wall surface - make Dulux/asian/berger

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade in double coat with approved colour,shade all labour and materials complete - make Dulux/asian/berger

Applying primer coat for wheather shield/apex of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer -make asian

Providing and applying Wheather Sheild Acrylic Paint of Dulux/ Asian or any other approved equivalent make for external surfacesetc. including preparing the surface, cleaning, coir brushing, scaffolding, all labour and materials compleyte in Single coat with approved colour, shade all labour and materials complete.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : complete with all tools, plants,labour and materials.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with excavation complete -Inside dimensions 455x610 mm and 45 cm deep

Wiring for light point with 1.5 sq.mm (upto 6 mts) FRLS PVC insulated copper conductor single core cable in FRLS pvc / MS conduits or casing caping (as per engineers instruction), with modular switch, modular plate, suitable PVC modular box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying,installation & Commissioning of havells 10w light (E-Lite LED Pride Plus Neo havells) ,Shape: straight linear, Rated input voltage: 230V, Diameter:60cm, UV/IR Radiation : no harmful radiation, life: 25000 hours, light effect: warm white, fixture type: batten.Makes : Havells / any other equivalent approved make.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

(Hutatma Bapu Gawas Memorial -Govt High school Chandel Pernem - Item no. 44 to Item no.86) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Hard rock

Filling available excavated earth (excluding rock) in , plinth, sides of foundations etc. in layer consolidating each deposited layer by ramming and watering .All labour and material etc. complete.

Soling with hard laterite rubble stone of 20cm to 30cm size including hand packing, spreading murrum, watering, laying to necessary compacting etc complete with all tools, plants, labour and materials.

Providing and laying plain cement concrete (1:3:6) using 20/40mm graded black trap stone metal out of quarried boulders as coarse aggregate including mixing, depositing, consolidating, levelling, curing, etc. All tools, plants,labour and materials complete.

Constructing masonry in foundation and plinth using precast cement concrete solid blocks having a crushing strength of not less than 70kg/m2 (28 days curing) and a mix not leaner than (1:5:10) in cement mortar (1:6) including providing specially moulded blocks at junctions and corners, curing etc complete with all labour and materials.

Constructing masonry in superstructure using precast cement concrete solid blocks having a crushing strength of not less than 70kg/m2 (28 days curing) and a mix not leaner than (1:5:10) in cement mortar (1:6) including providing specially moulded blocks at junctions and corners with all scaffolding lift ,raking out joints curing etc. complete with all labour and materials.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,chamber covers bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with GI binding wire all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Make SAIL/JSW

Plastering with cement mortar (1:4) 15mm thick in single coat for internal surfaces of walls including curing etc all labour & material etc. complete. All labour & material etc. complete

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

15 mm cement plaster on inside wall finished with a floating coat of neat cement of mix :for septic tank.

Providing and laying Ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours including cutting, cleaning, curing, filling the joints with white cement mixed with suitable colour pigment, on 20 mm thick Cement Mortar 1:4 (1 Cement : 4Coarse sand) etc. complete with all labour and materials.(Kajaria, Johnson make) (Basic rate of Rs.500/- per Sq.mtrs)

Providing and fixing ceramic glazed wall tiles of Johnson / Kajaria /Nitco-make/shade approved by GSL and 300x450mm size laid in skirting/dado with 1:3 cement mortar/cement paste as per requirement including cutting,making holes, cleaning, curing, filling the joints with white cement mixed with suitable colour pigment/special grout, etc complete with all tools, plants, labour and materials complete.(Basic Rate Rs.600/M2)

Supplying and fixing water supply lines using approved make/quality CPVC pipes of various dia and jointing with pipe specials such as bends, tees, couplings, elbows, Unions, reducers etc.including earth work excavation /dismantling masonry/PCC,making chase in wall and finishing the same complete with all tools, plants, labour and materials. 20mm dia - Astral/Ashirwad

Supplying and fixing water supply lines using approved make/quality CPVC pipes of various dia and jointing with pipe specials such as bends, tees, couplings, elbows, Unions, reducers etc.including earth work excavation /dismantling masonry/PCC,making chase in wall and finishing the same complete with all tools, plants, labour and materials. 25mm dia -Astral/Ashirwad

Supplying and fixing waste water lines using various dia PVC/SWR pipes of Prince/Finolex or any other approved equelent make and jointing with pipe specials such as bends, tees, elbows ,plug etc.including earth work excavation /dismantling masonry/PCC ,making chase in wall and finishing the same complete with all labour and materials. 65mm

Supplying and fixing waste water lines using various dia PVC/SWR pipes of Prince/Finolex or any other approved equelent make and jointing with pipe specials such as bends, tees, elbows ,plug and other fittings etc.including earth work excavation /dismantling masonry/PCC ,making chase in wall and finishing the same complete with all labour and materials. 110mm

Providing and fixing angualr cock of approved quality : Jal/Ark/plumber/hindware/Belved make

Providing and fixing bib cock of approved quality Jal/Ark/plumber/hindware/Belved makmake with all tools, plants, labour and materials.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests - make Hindware/cera/parryware

Providing & fixing wash basin of vitreous china 550x400mm make -Hindware/cera/parryware with all accessories such as C.I. brackets,waste coupling,rubber plug,C.P. brass trap with 8cm deep seal with wall flanges, 12mm P.V.C. plastic pipe with necessary inlet & outlet connection, long neck pillar cock jal/Ark/plumber/hindware make -waste coupling incl.sealing around the wash basin with white cement ,paiting brackets etc.all tools, plants, labour and materials complete.

Providing and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of EPEE make required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames with hinges. complete with all tools, plants,labour and materials.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of EPEE make cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete with all tools, plants,labour and materials.

Providing and fixing bright finished ss latch with necessary screws etc. complete : 300x16x5 mm

Providing and fixing bright finished ss Aldrop (250mm)with necessary screws, etc. complete.

Providing and fixing bright finished ss handles with screws etc.complete. Size- 150mm

Providing and fixing of RCC jali for the ventilator in toilet area of size 40 x 60 cm etc. complete with all labour and materials

Providing & fixing soap dish with bracket and container all labour and materials etc. complete.

Providing and fixing 600 x 450 mm mirror of superior glass (of approved quality) bevelled mirror polished edge with back support fixed to wall all labour and materials etc. complete.

Structural steel work using TATA/SAIL/VIZAG/TISCO/JSW by Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with paint of approved brand and manufacture

Providing and fixing precoated galvanised iron profile sheets (TATA/JINDAL)(size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %), total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.All tools, plants, Scafolding,labour and materials.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying primer coat for distemper of water thinnable cement primer of approved brand and manufacture on wall surface - make Dulux/asian/berger

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade in double coat with approved colour,shade all labour and materials complete - make Dulux/asian/berger

Applying primer coat for wheather shield/apex of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer -make asian

Providing and applying Wheather Sheild Acrylic Paint of Dulux/ Asian or any other approved equivalent make for external surfacesetc. including preparing the surface, cleaning, coir brushing, scaffolding, all labour and materials compleyte in Single coat with approved colour, shade all labour and materials complete.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : complete with all tools, plants,labour and materials.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with excavation complete -Inside dimensions 455x610 mm and 45 cm deep

Wiring for light point with 1.5 sq.mm (upto 6 mts) FRLS PVC insulated copper conductor single core cable in FRLS pvc / MS conduits or casing caping (as per engineers instruction), with modular switch, modular plate, suitable PVC modular box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying,installation & Commissioning of havells 10w light (E-Lite LED Pride Plus Neo havells) ,Shape: straight linear, Rated input voltage: 230V, Diameter:60cm, UV/IR Radiation : no harmful radiation, life: 25000 hours, light effect: warm white, fixture type: batten.Makes : Havells / any other equivalent approved make.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Description of Work / Item(s)

Applicable GST (18% of BoQ 2)

M/s Murali Builder

M/s Murali Builder

M/s Murali Builder