PWD/BWN/Rs.6.43 lacs/ Special repair of Primary Health Centre at Village Dhani Mahu in Bhiwani Distt.

Amount

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement (HSR 8.5©

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the walls is not to be dismantlled (8.18)(a) Door (6+14) =

Window

Ventilator

Scraping of white wash and colour wash HSR(8.32 (a)

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in first storey upto 4 meters above plinth level. HSR(10.59).

Precast cement concrete 1:2:4 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey. HSR(10.77).

Providing and laying 80mm thick I.S.I. Inter Locking paver blocks of all shapes and colours in design mix cement M-40 over a bed of 30mm thick fine sand complete in all respect HSR(10.159).

Tile terracing with one layer of tiles, 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1: 3 and top surface to be left clean.(HSR 13.14)

Cement concrete 1:2:4 gola 10cm X 10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified. (13.64)

Applying pink primer or aluminium priming ocat on wood work including preparation of surface, Knotting and stopping etc (16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade. HSR(16.3).

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. HSR(16.5).

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ,chikrassy and chaplash,etc.,(non-coniferous timber other than teak,conforming to I.S.specification No.1003,kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges,screws,chocks/cleats,stops,nails etc., complete,fixed in position (excluding the cost of any fittings,other than specified above,but including labour for fixing the same in position). (17.90(a)-30mm thick

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash,etc.,(non-coniferous timber other teak,conforming to I.S.specification No.1003, kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail, and wire gauze of 140G or 120G designation including cost of iron hinges, screws,chocks/cleats,stops nail etc.,complete fixed in position (excluding the cost of any fitings,other than specified above,but including labour for fixing the same in position)- (style and rails of windows shutter shall be 75 mm wide) (HSR 17.92(ii)+ HSR 17.18

Steel work, fixed independently without plates, including cutting, hoisting and fixing in position in: - tees, angles and channels HSR(18.1(C )

Supplying and fixing glass panes including special metal sash putty of approved make glass panes 4 mm thick, exceeding 40 sq dm areas (18.30(b)

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete. door and window frame of size 114 mm X 50 mm with 35 mm wide double rebate. HSR(18.34(d).

Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). [HSR 16.79 (b)]. 1st quality.

1.20 metres high fencing, with 1.65 metres posts, placed at every, 2.5 meters to 3 metres apart embedded in cement concrete blocks, and every tenth post, to be strutted, provided with 4 horizontal lines of G.I. barbed wire, weighing 9.34 kg. per 100 metres (minimum) and fixed with G.I. staples, tied to 6 mm bar nib, with binding wire or by providing cut, including drilling holes, in the post of complete (excluding the cost of posts, struts, earth work and concrete which is payable extra). HSR(24.36)

Providing and laying granular sub base consisting of drainage layer confirming to Table 400.1 Grading –VI of MoRT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No. 401 of MoRT&H specifications. (NS)

Recovery items: The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, bituminous layer and granular layers have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specifications) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under :- Door 6 Nos. @ Rs. 250/- Each

Tile 12334 Nos. @ Rs. 4/- Each

Tile bats 8.28 Cum @ Rs. 350/- P.Cum Note: All quantities of the below materials have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.

The Bawani Khera Khatu Shyam Coop L and C Society Ltd

SUBHASH

Raj Singh Contractor

Amit Aggarwal S/o Sh. Krishan Kumar