Special repair to certain buildings in domestic area at AF Stn Jaisalmer

Amount

Taking down PVC door chowkhats or frame with shutters (without taking off shutters from the frames), area not exceeding 1.5 sqm each complete all as specified.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area exceeding 1.50sqm but not exceeding 4.00sqm each complete all as specified and directed.

Taking down door shutters any description area exceeding 1.00 sqm each but not exceeding 2.00 sqm each complete all as specified and directed.

Taking down window frame with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified.

Second class hard wood plain, solid sraight door chowkats and frames, wrought including transoms or mullions, framed rebatted on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

Factory made 35mm thick second class hard wood plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class hard wood rail and styles, fixed to chowkat, complete all as specified and directed.

Factory made Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I.

Steel windows with side hung shutters including box type hinge of size 50mm with 'z' type steel handle and steel peg stay and 02 No.100 mm size MS tower bolts welded on each shutter complete with glazing bars, dovetailed or welded all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, handle complete all as specified and directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19mmx19mmx19 gauge and PDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15mmx15mmx15 gauge MS square tube inside the 19mmx15mm MS square tube and suitable screwed complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

Mild steel flat as in hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

Hacking out old broken glasses any thickness, size, quality or description from wooden/metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones, hacking and bldg height complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading not exceeding 0.50 sqm in each pane fixed any bldg height complete all as specified and directed.

3mm thick figured glass, pin head type and glazing with oil putty/wooden beading not exceeding 0.50m sqm in each pane fixed any bldg height complete all as specified and directed.

Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed as in repair complete all as specified and directed.

Second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beading complete all as specified and directed.

250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work confirming to Fe-290 Grade E-165 complete all as specified and directed.

100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Aluminium handle 150mm long cast type, anodized complete all as specified and directed

300mm Mild steel helical door spring ordinary (Capsule type) springs including roller and roller plate fixed complete all as specified and directed.

300mm Mild steel helical door spring ordinary (Capsule type) springs including roller and roller plate fixed as in repair complete all as specified and directed.

100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

100mm Butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

Preparation of old painted wooden surfaces or wood based material of any description exceeding over 10cm width or girth and applying one coat of synthetic enamel paint of any tint etc any colour as approved complete all as specified and directed.

Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

Preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

15mm thick plaster in cement and sand mortar (1:6) on fair faces of brick work or concrete surfaces or stone masonry surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.

10mm thick internal plaster in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Preparation newly plastered surfaces and applying readymixed wall care putty to smooth finish on wall surfaces etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (white or tinted) over a coat of primer after smoothening surfaces complete all as specified and directed.

Complete removal old treatment and applying readymixed wall care putty to smooth finish on wall surfaces etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (white or tinted) over a coat of primer after smoothening surfaces complete all as specified and directed.

Preparation of newly plastered surfaces or unplastered surfase of ceiling and applying two coats of oil bound distemper over one coat primer complete all as specified and directed.

Preparation of old decorated surfaces of ceiling surfaces by washing, rubbing down and stopping of painted sufaces and applying one coat of oil emulsion distemper of any tint etc complete all as specified and directed.

Preparation of newly plastered surface or unplastered surfaces of wall or new concrete surfaces and applying three coats of white wash complete all as specifie and directed.

Preparation of old decorated or unplastered surfaces of ceilings by brooming down, scrapping down smoke soot, mould, moss and efflorescent salts and greasy spot etc and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated plastered surfaces by washing, rubbing down and stopping of painting surfaces of wall and applying one coat of cement base paint (tinted) on surfaces of walls any colour as approved by GE complete all as specified and directed.

Coloured Non Skid ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Coloured glazed ceramic tiles size 300x450x6 to 7mm thick as on vertical surfaces such as dado/skirting over and including 10mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Dismantling of uneven/settled stone boulders in horizontal/ slope surface of any description or thickness in laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick laid in floors in squares or rectangular pattern laid over 15mm thick cement screed bed in cement and mortar (1:6) set and jointed in neat cement slurry and pointed coloured cement to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Machine cut Kota stone slab 20 to 25mm thick, as in skirting, riser of step, dado and pillar etc. laid over and including rendering of 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Mirror polishing on existing marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

20mm thick granite platforms over including 15mm thick in cement and sand mortar (1:6) screed bed and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and cutting/polishing to accommodate counter basin & polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in wash basin counter slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the debries to distance not exceeding 50m from site complete all as specified and directed.

Mild steel TMT bars upto 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing, culverts and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed.

Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:6) including demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs and including dismantling and taking down old unserviceable complete all as specified and directed.

Counter wash basin oval shape of size (560x450mm) white colour excluding taps, fixed as in repair complete all as specified and directed.

Vitreous china urinal, half stall type, white coloured, including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs and including 60mm long brass screws, pointing around urinal back in cement, with and including grating and union for discharge pipe, including 40mm size brass chromium plated waste coupling with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed as repair complete all as specified.

Flushing cistern PVC capacity 10 Litres valve less syphonic action type, low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe fixed as in repair complete all as specified and directed.

PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and including taking down old unserviceable complete all as specified and directed.

15mm bore chromium plated shower rose with or without CP arms swivel joint, 75mm dia, including fixing to steel pipe or union and fixed as in repair complete all as specified and directed.

15mm bore fancy type chromium plated angle cock/stop cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed.

15mm bore chromium plated brass Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and including taking down old unserviceable taps complete all as specified and directed.

Stop valve with 15mm bore (concealed type) cast copper alloy chromium plated screwed down, high pressure, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.

15mm bore fancy type chromium plated pillar taps with capstan heads, screwed down high pressure with long screwed sharks and fly nuts screwed down for iron pipes etc and fixed as in repair complete all as specified and directed.

Tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges fixed as in repair complete all as specified and directed.

32/40mm bore PVC flexible down take waste pipe fixed to WHB, urinal or sink fixed as in repair complete all as specified and directed.

Soap dish, fixed in position with steel screws, fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No. AQN-7731 or equivalent.

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed.

Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.

20mm bore Gun-metal globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe and fixed as in repair complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 Litre capacity triple layer (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. and including taking down existing water storage tank complete all as specified

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor including taking down old unserviceable pipe complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor including taking down old unserviceable pipe complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) vent cowl fixed as in repair complete all as specified and directed.

PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1:2:4 complete all as specified and directed.

PVC (SWR) gully trap 125/110mm dia setting and jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1:2:4 complete all as specified and directed.

Stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 100mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces fixed in repair complete all as specified & as directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finishing cement concrete surface fair and even complete all as specified and directed.

25mm thick Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling coarse in flooring, finished even and rough complete all as specified and directed.

75mm thick Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as floor and plinth protection, finishing surface even and smooth without using extra cement complete all as specified and directed.

5mm thick cement plaster in cement mortar (1:3) on uneven surfaces of concrete smooth finished surfaces of ceiling, RCC chajja, column, slab edges finished even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed.

Supply, installation, connecting and testing, electric water heater, storage type, steel body with stainless steel inner tank and heating element upto 2 KW, capacity 25 litre, BEE 5 star rated complete with all assessories such as 02 Nos hot water gun metal glove/safety valve 15mm bore, 02 Nos hot water PVC connection 450mm length and 01 Nos hot water tape of brass/gun metal 15mm bore etc omplete all as specified and directed.

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors for geyser, complete all as specified and directed.

Sub main wiring with 4.00 sqmm, Single Core, PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 volts grade conforming to IS 694 including 4.00 Sqmm Single Core PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade as continuous earth wire in green colour drawn through in PVC conduit 25mm dia including taking down old wiring complete all as specified. Note : Two run of 4.00 sqmm cable and one run of 4.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

Single Pole and earth enclosure with a two pin and earth plug and MCB Protected Socket (Modular AC Box, Metal clad box) Two Module, with one Single Pole, 20 Amps, repturing capacity 10 kA including taking down old unserviceable complete all as specified and directed.

MCB, Single Pole, 6 to 32 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles fixed complete all as specified and directed.

MCB, SPN, 40 to 63 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, fixed as in repair complete, all as specified & directed.

Point wiring for one light point controlled by one way switch with 1.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Helogen (FRLSH) cable 1100 Volt grade including 1.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Helogen (FRLSH) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated & including suitable size module boxes for housing of modular switches, sockets, regulators including taking down old unserviceable point wiring complete all as specified & directed. Note : (i) Unit rates quoted by contractor shall be deemed to included for cutting chases in walls, ceilings and making good surfaces in cement and sand mortar (1:3) and finishing the surfaces to match with existing surfaces. (Make : Hylem/Anchor/Formica including machine screws and washer etc for fixing switches sockets etc including 1.5 sqmm copper conductor, standard (green colour earth), PVC insulated unsheathed earth wire to commen earth and connected to earth dolly as specified and directed.

All as per serial item No. 94.00 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed.

All as per serial item No. 94.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5/6 Amp switch on same board complete all as specified and directed.

All as per serial item No. 94.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5/6 Amp switch on independent board complete all as specified and directed.

Switch piano, flush type, Single Pole, one way, 6 Amp, 240 Volts (ISI Marked) fixed as in repair complete all as specified and directed.

Socket outlet, 2 in 1, 3 pin, 5/6 Amp, flush type, 240 Volts (ISI Marked) fixed as in repair complete all as specified and directed.

Decorative ultra slim square profile LED tube light fittings of capacity 20 watt LED 6500 K, basic all purpose surface and wall mounted LED batten with extruded polycarbonate housing & integrated electronic driver including taking down old unserviceble LED fittings complete all as specified and directed.

Sheet metal enclosure powder coated single phase DB SPN 8 ways and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Exhaust Fan, steel body, 300mm sweep, heavy duty, ISI Marked with mounted in suitable opening arrangement with louvers shutters suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2 mm drawn in flexible PVC conduit from ceiling rose or connector to exhaust fan including marking of MES number and making holes into wall and fixed to wall by using 4 Nos, bolts, nuts and washers and grouted in wall in CM 1:3 complete all as specified and directed.

BHAGWATI CONSTRUCTION

KALLA TRADERS AND ENGINEERS