PROVN OF 03 X DEFICIENT TOILET BLOCKS WITH BATHROOM, WCs, URINAL AND WHB AT UNIT COMPLEX NEAR BLDG NO P-158 AND P-250 AND OTHER SANCTIONED WORKS UNDER GE (WEST) JALANDHAR CANTT

Amount

Note: Please refer Schedule 'A' Notes given in the tender documents.

Lump Sum Price Worked out by the tenderer for BUILDING WORK as listed in Schedule 'A' Part-I brought from serial page No. 16.

Lump Sum Price Worked out by the tenderer for INTERNAL ELECTRIFICATION WORK as listed in Schedule 'A' Part-II brought from serial page No. 18.

Lump Sum Price Worked out by the tenderer for INTERNAL WATER SUPPLY WORK as listed in Schedule 'A' Part-III brought from serial page No. 19.

Lump Sum Price Worked out by the tenderer for SEWAGE DISPOSAL WORK as listed in Schedule 'A' Part-IV brought from serial page No. 21.

Misc Section-V (Misc Items)

Dismantling plain or corrugated asbestos sheet in roof covering including ridges complete all as specified and as directed.

Supply & fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by engineer-in-charge

Supply & fixing pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by engineer-in-charge

Dismantling Timber scantling framed work 40sqcm & over in section in any position.

Supply & fixing Rolled mild steel section as in joist, channel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified an directed

Taking down ceiling boards of any description and thickness including cover fillets complete all as specified.

Supply & fixing 4mm thick of size 600x600mm HSPC (high pressure steam cured) pre-primetred self embossed textured designer E-classic board to be fixed to GI powder coated grid/section size 600x600mm with main runner 38mm x 24mm x 0.9mm and wall angle 19mm x 0.9mm and duly suspended with 4mm dia GI bar hangers @1200mm centre to centre bothways fixed with steel dash fasteners or from purlin/roof with alignment clip incl providing provn for light fixtures of any size complete

Taking down chowkhat or frame with shutters (with out out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.

All as per ser item No 15.00 above but exc 1.5 sqm but not exc 4 Sqm each

Supply & fixing factory made steel window 1.25mm thick box type ERW hollow P section of size 60mm x25mm single rebated comprise of gauged skelton shutter ERW size 50mmx20mm and 1.25 mm thick with two openable leaf consisting two Nos sash bars of T- section 20mmx3mm welded to frame with one vertical mullion of ERW box type T- section of size 60mmx25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window) including following fittings welded to frame shutter:- a) Hold fast 150mm long of 12mm x3mm made to shape -04 Nos per window.(b)Handle of z section 20mmx25mm, 100mm long - 01 Nos per leaf. (c) Mild Steel Tower bolt 150mm long -02Nos per leaf. (d) Z-section 20mmx25mm, 100mm long 01 Nos per leaf.(e) Mild Steel pintle hinges of size 75mmx12mm-02 Nos per leaf. (f)One shop coat of primer. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Wire mesh and painting shall be measured and paid separatly under respective items.

All as per item No 17.00 above but window with glazed shutter. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Glass panes and painting shall be measured and paid separatly under respective items.

Supply & fixing mild steel framed work such as door/cup board frame, guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified.

Supply & fixing factory made 2nd class hardwood Plain framed panelled shutter (two pannel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated 35mm thick.

Supply & fixing 2nd class hardwood locally fabricated glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).

Supply & fixing PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

Supply & fixing 100mm butt hinges, stainless steel medium weight and fixed

Supply & fixing 150 mm aluminium handles, cast type anodised

Supply & fixing aluminium anodised barrel tower bolt of extruded section of 200mm size

Supply & fixing 300 mm long aluminium alloy, anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.

Supply & fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

Supply & fix sheet glass ordinary quality 3mm thick, n. exc 0.5 sqm in each pane

Supply & fixing 300 mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate complete as approved welded to steel chowkets

Roughning of old concrete surface/floor by pickings, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm complete.

Dismantling floor hearth wall tiling (but not backing) removing serviceable tiles to store, rubbish off the premises complete all as specified and directed

Material & labour for non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor over & including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

All as per ser item No 33.00 above but in skirting and dado over & including 10mm thick rendering in cement mortar (1:4)

Material & labour for glazed ceramic colour tiles 300mmx450mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over & including cement mortar rendering 10mm thick cement mortar 1:4 complete all as specified and as directed

Material and labour for 20-25 mm thick machine cut kota stone slab 550mm x 550mm of minimum size flooring over and incl 20mm thick screed bed in cement mortar 1:4, roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry @ 3 kg/sqm with pigments to match the shade of slab including cutting, rubbing and mirror / granite finish polishing complete all as specified and directed.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete.

Material & labour for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded aggregate) as in sub floor

Chequered cement concrete coloured tiles 300x300x25 mm thick laid over and including 20 mm thick bedding layer in cement mortar 1:6 set, jointed and pointed in cement mortar 1:3 with grey cement and using pigment as in paths complete all as specified.

Material & labour PCC 1:3:6, type C-2, 50mm thick as in plinth protection & surface finished fair and even without using extra cement.

Demolition of brick work built in cement mortar including all quoins arches pillars etc.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and as directed.

All as per Ser item No 42.00 above but except bricks.

Taking down cement plaster on brick wall upto any height(max of triple storey) including raking out joints, hacking for key, srcubbing down with water complete all as specified and as directed

Material & labour for15mm thick rendering in cement mortar 1:6 on fair faces of brick work, finished even and smooth with out using extra cenent complete all as specified and directed

Material & labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work finished even and smooth with out using extra cement complete all as specified and directed

Material & labour for 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for preparation new surface of wall and applying two coat of oil emulsion distemper over a coat of wall putty complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer all as specified and directed.

Material & labour for three coats of white wash on newly plastered surfaces of ceiling including prepration of surfaces complete all as specified and directed.

Material & labour for preparation of old decorated surface of walls applying one coat of white wash complete all as specified and as directed.

Complete removal of existing treatment on wall surfaces and applying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls (minimum 1mm thickness) etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of old decorated surface of walls and applying one coat of cement base paint (upto 3 storey bldg) complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint.

Material & labour for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of old steel surface of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified

Taking up or down existing 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down existing 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted.

Supply & fixing 15mm dia bore GI tubing, galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, including cutting through walls floors etc.

Supply & fixing 20mm dia bore GI tubing, galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reducer etc and fixed to wall, ceiling or laid in floor with new fittings, including cutting through walls floors etc.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

S& F in repairs 1000 Ltr capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position double layered, ISI marked, complete all as specified and as directed.

S& F in repairs 500 Ltr capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position double layered, ISI marked, complete all as specified and as directed.

S& F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified

Supply & fixing in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed

Supply & fixing in repair brass chromium plated tublar towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted

Supply & fixing in repairs epoxy powder coated pelmet rods of mild steel with and including pair of brackets & fials complete.

Supply & fixing in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including bracket with 32mm dia PVC pipe 600mm long complete all as specified and directed

Supply & fixing in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

Supply & fixing in repairs vitreous china urinals, half stall type , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Supply & fixing in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

Supply & fixing in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.

Supply only 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed

Supply & fixing in repairs 15mm dia bore stop cock /Angle valves cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed.

Supply & fixing in repair vitreous china wash hand basin (pedastal pattern) white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of waste pipe fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed

Material & labour for PCC 1:3:6 type C-1 as in roof padding/benching concrete to bring the existing slab in slope of 1:40 complete all as specified

Material & labour for fixing APP based polymeric membrane minimum weighing 3.60 kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced application

Material & labour for preparing new surface of concrete roof over 10cm width or girth and applying two coats of aluminiam paint complete all as specified and as directed by Engineer-in-Charge

M&L for cement concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate, as in copings, weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Supply & fixing in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed.

Supply & fix water closet seat cover, white closed pattern with flat bottom & cover for EWC complete all as specified and as directed

S&F in repairs vitreous china wash down water closet (Pedestal pattern) 'white (excluding flushing cistern and flush pipe ) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed

Supply only 15mm dia bore fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes.

Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep in soft/loose soil for foundation, not exceeding 10 Sq.m area on plan and for similar works and getting out complete all as specified and as directed by the Engineer-in-Charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Supply and spread river sand in trenches as cable cushioning 8cm below the cables and 15cm above the cable all as specified and directed.

Supply and laying burnt bricks sub class 'B' using old size bricks laid across the cable in trenches as protection to the cable all as specified and directed.

Material and labour for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundation, filing and mass concrete complete all as specified and directed.

Material and labour for Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

Material and labour for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410 W Gde E-250 quality - B complete

Supply and fixing ceiling fan complete with blade, down rod and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) fitting and fixtures such as switches, socket, call bell lamp holder, regulator, sketch fittings etc and, making good disturbed surface of wall, ceiling floor etc complete all as specified and directed.

Material & labour for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including modular type cover plate white colour all as specified and directed for: (a) One light / fan / call bell point controlled by one, one way switch.

All as per Ser item No 97.00 above but for 5 Amps socket on independent board

All as per Ser item No 97.00 above but for 5 Amps socket on the same board

All as per Ser item No. 97.00 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board

Supply & fixing switch piano 5 Amps, SP, flush button type, one way, 230 Volts, AC

Supply & fixing socket out let multipurpose 5 pin 5 Amps, flush type, 230 Volts complete

Supply & fixing switch piano 15 Amps, SP, flush button type, one way, 230 Volts, AC complete

Supply & fixing socket out let multipurpose 3 pin 15 Amps, flush type, 230 Volts complete

Material & labour in replacement for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of not less than 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. (Three runs of cable and one run of conduit shall be measured as one length)

Material & labour Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings incl 01x 10 Watt LED bulb complete all as specified and directed.

Supply and fixing stepped socketed type electronic fan regulator flush type and connecting up 230/250 volts complete

Supply & fixing in repairs LED Batten light fitting 22W retrofit including LED lamp with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (white light) fixtures box type with retrofit LED rod 20 watt and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed

Supply & fixing in repair LED street light fitting 60W Endura Pearl Plus including LED pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core including GI pipe 32mm light grade 0.9 mtr long bent to L shape in 02 Nos of GI clamps of size 25x6mm of length 25mm with nuts, bolts and washers complete all as specified and directed.

Supply & fixing ceiling rose surface bakelite 65 x 50 mm with three terminals complete all as specified.

Supply & fixing in repair 34 watt 2 x 2 LED PLUTO NEO ceiling light fitting ultra modern designed, LED luminaries which provides soft-light and glare free symmetrical illumination suitable for armstrong/ grid ceiling, including bracket, nuts, bolts washer as required for fixing. Cat Part No PLUTONEO2X2PLR34WLED840S of Havells or equivalent as per list of makes complete all as specified and directed.

Supply & fixing in repair exhaust fan metallic body, 300mm sweep, 900 RPM, single phase, 230 volt, heavy duty with louvered shutter including provision of three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washer, all as specified and directed.

Material and labour for making wall opening and grouting the nut and bolt in the wall for exhaust fan of size 300mm sweep including cement work and making good the disturbed surface

Supply & fixing in repairs DB, SPN 8 way double door for MCB, 240 volts with 200 Amps rated bus bar

Supply & fixing for isolator SPN 40 Amps 240 Volts complete

Supply& fixing MCB SP 6 to 32 Amp 240 Volts complete

Material & labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe light grade', watering pipe 20 mm dia GI 'light grade', GI wire mesh funnel, alternate layer of char coal and salt on all side to earth plate as specified, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation and earth work, testing the earthing after complete all as specified and directed.

Supply and laying GI tubing light grade 40mm bore with all necessary fittings laid in trenches, under road crossing in floors or fixed to poles/DB for cable protection etc complete all as specified and directed.

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duly) with stranded aluminium conductor cross sectional area 25 sqmm 2 core suitable for working on 1100 Volts, earthed system, laid in tranches, in floor, in ducts, through pipe or along pole fixed in repairs complete all as specified and directed.

H K CONSTRUCTIONS

M/S Kuldip Construction Co.

Barmotra Infrastructures