Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹30.7 L+₹69,188.49 (2.30%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹31.9 L+₹1.9 L (6.27%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹32.3 L+₹2.2 L (7.34%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
11 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
SPECIAL REPAIR TO BLDG NO T-18, T-14, T-23 and P-02 INCLUDING PROVN OF INTERLOCKING TILE, SEPTIC TANK ALONGWITH SOAKAGE WELL UNDER AGE B/R DETT-A AND AGE E/M OF GE 862 EWS
2023_MES_623270_1
GER-58/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
AS per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹80,000
Yes
22 Dec 2023
14 Oct 2023
13 Nov 2023
14 Oct 2023
11 Nov 2023
27 Oct 2023
Amount
Sch 'A' Part-I (B/R works) Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level, removing debris outside MoD land complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450x350x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles, and removing rubbish off the premises complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4 including 25mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate including dismantling of old tiles, and removing rubbish off the premises complete all as specified and as directed.
M&L for vitrified tiles light shade, double charged (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles, and removing rubbish off the premises complete all as specified and directed.
All as per srl item no 4.00 here-in-before but in skirting including 10 mm thick rendering in cement mortar 1:4 including dismantling of old tiles, and removing rubbish off the premises complete all as specified and directed.
M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar 1:6, complete all as specified and directed.
All as per item No. 9.00 here-in-before but except stone.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
S&F for mild steel structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. conforming to Fe-410-W (Gde - E-250) quality A complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridge, cladding to wall fixed with self tapping screws manufacturer’s instructions, complete all as specified and directed.
Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or stone masonry work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick, stone or concrete work (external surface), finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 20 mm thick in cement mortar 1:6 on stone masonry work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 20 mm thick in cement mortar 1:4 on stone masonry work (exrternal surface), finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 5 mm thick on concrete surface in cement mortar 1:3 on ceiling, finished suface even and smooth without cement, complete all as specified and directed.
Demolition of reinforcement cement concrete of any description and any position not otherwise specifically provided for, complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves, including sup-ports, overhangs etc also splays between floors and beam etc, complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, complete all as specified and directed.
M&L for reinforced cement concrete A-1 type, 1:1.5:3 (Nominal Mix) (using 20mm graded crushed stone aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajja and in shelves and the like, complete all as specified and directed
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm and removing from site, complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm and n. exc 4.00 Sqm and removing from site, complete all as specified and directed.
S&F for pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-1 using 20mm graded crushed stone agregate complete all as specified and directed.
S&F for pressed steel door frame of size 105x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-1 using 20mm graded crushed stone agregate complete all as specified and directed.
S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F for flush shutter 30mm thick solid core construction, with block board core and plywood face panel, commercial type both sides complete all as specified and directed.
S&F for 300mm ordinary rat tail rod pattern spring including roller plate complete all as specified and directed.
S&F double legged door stopper of aluminium alloy with rubber complete all as specifed and directed.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in apex stone, coping, benching, hold fasts, water troughs, bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work ,complete all as specified and directed.
S& F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvinsed wire staples , complete all as specified and directed.
M&L for 150 mm long extruded aluminium alloy handles size fabricated type anodised (ISI marked), complete all as specified and directed.
M&L for 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked), complete all as specified and directed.
M&L for 300mm long (lenth of bolt) aluminium alloy, anodised, sliding door bolt with hasp, stapl (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruced sections or cast aluminium alloy anodised (ISI marked) complete all as specified and directed.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and shown on drwaing in SSR Part-II (2020) directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & shown in drawing mentioned in SSR Part-II 2020, complete all as specified and directed.
M&L for mild steel work in chimney bars (straight or camber) breaing bars, tougues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frames 'L' or 'T' section supports for shelves etc and similar articles conforming to Fe-290 Gde E-165, complete all as specified and directed.
S&F for factory made MS tubular Box type window (double rebate and double shutter) of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge, corner welded to form a solid fused welded joint, handles shall be of Z section welded with openable frame box steel section used in outer frame, shutter frame and central frame shall be ERW secton of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to Z section of steel window to provide suitable arrangement of using tower bolt. Glazed, gauzed window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars including 3mm thick sheet glass ordinary quality and GI wire mesh of 0.56mm nominal dia and average width of aperture 1.18 mm etc, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or portion framed and hung as gates, including pintel hinges, stops, hand made sliding bolt etc and similar work conforming to Fe 290 or E-165 work including welded fabricks frames, gate and framed truss etc complete all as specified and directed.
M&L for preparation of new steel surface exc 10 cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Chagre.
M&L for preparation of new wooden surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over and including 3mm thick wall care putty, complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion over including 3mm thick wall care putty, complete all as specified and directed.
Taking down GI tubing 15mm dia and connection including cleaning for refixing or removal complete all as specified and directed.
Taking down GI tubing 20mm dia and connection including cleaning for refixing or removal complete all as specified and directed.
S&F for 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.
S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc complete all as specified and directed.
Fixing only 15mm dia GI tubing 15mm dia with all new fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.
Fixing only 15mm dia GI tubing 20mm dia with all new fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.
M&L for 20mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes complete all as specified and directed.
S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete as in repair all as specified and directed.
S&F in repair for ball valves suitable for 20mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15mm bore Stop valve (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F in repair for 20mm bore Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement and connecting to waste pipe, complete all as specifed and directed.
S&F in repair for PVC (SWR) pipes 110mm bore, type 'B' , single socketed in any length with rubber ring joints, laid in trenchs or in floor or fixed to wall with steel clamp complete all as specified and directed.
S&F in repair for PVC (SWR) pipes 75mm bore, type 'B' , single socketed in any length with rubber ring joints, laid in trenchs or in floor or fixed to wall with steel clamp complete all as specified and directed.
S&F in repair for sinks with draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair for sinks made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair for 32mm dia waste fittings, brass, chromium plated with long screwed shank and fly-nuts (half or full threaded), flange end bedded in red lead cement and other end fixed for glazed are sink, basin etc complete all as specified and directed.
M&L for 20mm thick granite of any type machine cut as any type of work such as in steps, jambs, pillars, window - cills, cooking platforms and like in cement mortar 1:4 including pointed in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including grinding and polishing, complete all as specified and directed.
S&F in repair for grating doom 100 mm of PTMT (Min Weight 40 Gms) with waste hole, complete as in repair all as specifed and directed.
S&F in repair for 100mm dia stainless steel grating , complete all as specifed and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
M&L for coloured chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick with grey cement and pigment, set and jointed in neat cement slurry in floor and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.
M&L for 100mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregates as in sub base, complete all as specified and directed.
S&F in repair for drapery rod (Curtain rod) of wooden finishes of 25mm dia fency type complete and hanging hooks/brackets/end caps of length 1.5 mtr to 1.8 each, complete all as specifed and directed.
S&F for 15mm bore brass chromium plated sink/basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
Complete removal of existing water proofing treatment / prepartion of new surface, over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:4 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed. (ii) Rate of WPC will be included in the quoted rate.
M&L for Machine cut kota stone slab (mirror polished) flooring 20- 25mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar 1:4 of any size including demolition of old kota stone complete all as specified and directed.
M&L for Powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F for powder coated anodised aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F for powder coated anodised aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no). hinges type B-21 100mm long (2 no.) suitable handle (1no), complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work, complete all as specified and directed.
S&F for door closer hydraulically regulated, aluminium (extruded section body) designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg., Complete all as specified and directed.
S&F for 100 mm size mortice lock of brass, vertical type, 4 levers fixed to aluminium doors including all fittings and fixture, complete all as specified and directed.
M&L for preparation of old decorated plastered / un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.
M&L for complete removal of existing treatment of walls and applying two coats of cement base paint after preparation of surface, complete all as specified and directed.
M&L for preparation of old decorated plastered/un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coats of oil emulsion distemper including one coat of wall care putty 3mm thick, complete all as specified and directed.
M&L for preparation of old decorated plastered/un-plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coats of oil emulsion distemper including one coat of wall care putty 3mm thick, complete all as specified and directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, platforms and like in 15mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including dismantling of existing granite, complete all as specified and directed.
M&L for construction of septic tank of capacity 10 users designed to carry sewage and sludge water, excavation in any type of soil, brick work in cement mortar 1:4, PCC 1:2:4 type B-2 in foundation, RCC slab cover including RCC precast manhole cover vent shaft, connection etc including returning , filling of soil at sides of tank, well ramming in layers and removing excavated surplus soil to a distance not exc 50m,and shown on drawing No CE/TD 1202/2008 SH 1/2 & 2/2 and as directed at site by Engr-in-Charge.
M&L for construction of soakage well 1.5 m dia and 3.00 m deep including excavation and earth work in any type of soil, PCC 1:3:6, type C-2 in foundation, walls of honey combed masonry with top ring of M-25 concrete including intercerpting chamber and screen chamber made of brick masonry in cement mortar 1:4, RCC cover slab in M-25, interconnecting pipes of RCC, complete filled with brick bats complete all as specified and shown on drawing No CE/TD 1202/2008 SH 1/2 & 2/2 and as directed at site by Engr-in-Charge.
Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil for foundation, laying of cable/pipes/poles etc and getting out in any type of soil, complete all as specified and directed.
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick ,complete all as specified and as directed.
Removing excavated material, not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.
M&L for providing precast cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in manhole cover, chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete and setting in cement morter 1:4 including necessary formwork complete all as specified and directed
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick, stone or concrete work, finished the surface even and smooth without using extra cement mixing with water proofing compound as per manufacturer instruction, complete all as specified and directed.
M&L for 150 mm internal dia Salt-Glazed stone ware drain pipes grade 'A' laid in trenches over concrete bedding jointed in cement mortar (1:1) and tested ,complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base, foundation, filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-2 ,using 40 mm graded stone aggregate, as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm bore SGSW pipe, complete all as specified and directed.
Surface excavation in Hard/dense soil, 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block of any shape and size approved by Engineer-in-Charge , ISI marked (IS:15658-2006) 80mm thick, M-35 grade (Heavy Traffic), in paths and hardstanding,with grey cement, laid tightly over & including 25mm thick dry sand cushioning (compacted) and joints filled with dry sand, colour and pattern as approved by GE, complete all as specified and directed. (Note: 20% coloured interlocking paver block with colour pigmant and 80% grey cement interlocking paver block with no pigment are used as directed by Engr-in-Charge).
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work, complete all as specified and directed.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing ceiling board etc, complete all as specified and directed.
S&F in repair for viterous china wash down water closet pan, white (pedestal pattern), white one piece complete with flush mounted on EWS excluding fixing bolts and flushing cistern and flush pipes etc, complete all as specified and directed.
S&F for 110mm dia PVC (SWR) P trap complete all as specified and directed.
S&F repair for PVC connection 15 mm x 450 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.
S&F in repair for brass chromium plated shower rose 125mm with or without swivel joints, any size inlcuding fixing to steel pipe or union, complete all as specified and directed.
S&F in repair for brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange, aluminium anodised, complete all as specifed and directed.
S&F in repair for vitreous China wash basin, white, flat back, size 550x 400mm with pedestal including cutting for and pinning in ends of bracket or erecting stands, complete all as specified and directed.
S&F in repair for 15mm bore, pillar cock, cast copper alloy, with capstan heads, chromium plated, fancy type, screwd down high pressure , with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for toilet paper holder of brass chromium plated fixed to wall with chromium plated screws, complete all as specified and directed.
S&F for Brass chromium plated Health faucet (ABS Body) for EWC suitable for 15mm dia pipe with 1.25m long flexible tube at ABS wall hook with all fittings complete as in repair all as specified and directed.
S&F in repair for vitreous China bowl urinal flat back of size 465x355x265 mm white (minimum), with grating and union for discharge pipe excluding flushing cistern and incluidng flush type and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, complete all as specified and directed.
S&F for high density polythylene (HDPE) pipe 32mm dia of pressure rating 6 kgf/Sqcm, complete all as specified and directed
S&F fabricated anodized aluminium grill of size 75x100mm using 5mm dia bars fixed to frames using U/V section runners, complete all as specified and directed.
S&F door seals made of aluminium strip powder coated 20mm wide and provided rubber / cotton mat lining fixed with screws to door shutters upto 1m width opening , complete all as specified and directed.
Refixing of shutters of any description and any size, complete all as specified and directed.
Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications, complete all as specified and directed.
M&L for point wiring for one light point/fan point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including PVC conduit pipe not less than 20mm dia concealed in wall/surface of ceiling complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)
Description all as per Serial item No 123.00 above but for one 3 pin 6 Amp socket outlet on independent board controlled by one 6 amp switch, complete all as specified and directed.
Description all as per Serial item No 123.00 above but for one 3 pin 6 Amp socket outlet on same board controlled by one 6 amp switch, complete all as specified and directed.
Description all as per Serial item No 123.00 above but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper cable with 2.5 sqmm single core multistraind FRLS copper cable as earthling lead complete all as specified and directed.
M&L for switch piano, flush type single pole, one way 5 Amp, 240 volts complete all as specified and directed.
M&L for switch piano, flush type single pole, one way 15 Amp, 240 volts complete all as specified and directed.
S&F for socket 2 in 1, 5 pin, 5 amp flush type complete all as specified and directed.
S&F for socket outlet 2 in 1, 5 pin, 15 amp multipurpose, flush type complete all as specified and directed.
S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals complete all as specified and directed.
M&L for ceiling fan regulator elctronic, flush type, hum free suitable to control speed of fan from 0 to 100% rotary type five step 240 volts AC complete all as specified and directed.
S&F in repair for lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/angular/pendent fittings including LED lamp 7/9watt complete all as specified and directed.
M&L in repair for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type ultra slim with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete as in repair all as specified and directed.
S&F in repair for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electrically using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, including LED driver, complete all as specified and directed.
S&F in repair for 15 watt recess/surface mounting 3000k/6000k light fitting LED backlit round or square (as required at site) down lighter with high efficient LEDs & glate free opal diffuser IP 20, internally prewired, 230 volts, complete with all accessories such as electronic driver, connector block etc and necessary fixing arrangement at any height complete all as specified and directed.
M&L in repair for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)
M&L in replacement for MCB single pole 240 volts any rating from 6 to 40 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L in replacement for MCB Single pole & neutral 240 volts any rating from 40 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners, overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items, complete all as specified and directed. (Note : - 02 run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).
M&L for sub main wiring complete with 2 run of 6 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners, overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 6 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items, complete all as specified and directed. (Note : - 02 run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).
Taking down fan, ceiling cable end, from existing position, including dismantling blades and removing fan blades and depositing to MES store yard complete all as specified and directed.
Painting of ceiling fans complete which retrieve from item no 140.00 above with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc including hanging to existing place complete all as specified and directed.
S&F for LED street light fitting 25 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height connecting with three core 1.0 sqmm copper cable from connector to fitting including bracket made up of 40mm bore light grade GI pipe 1.2mtr long including necessary bending, welding etc and after taking down old unserviceable light fittings of any type complete all as specified and directed
Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 Sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands , complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE).
M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified in SSR Part-I and as directed. (Note: Punned thickness of sand shall be measured and paid).
M&L in replacement for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2009 including testing on completion including taking down existing unserviceable earthing complete all as specified. (Note:-Earthwork, Earth strip and protection pipe upto board is included in the rate quoted)
M/S SURINDER PAL
M/S Narinder Pal Choudhary
M/S. Choudhary Dewan Chand And Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .