Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹11.5 L
Closing Date
19 Oct 2026, 4:30 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Bengaluru Central City Corporation
G BHASKAR REDDY
Completion works Viz., Electrification, Water and Sanitary Supply Lift and Other facilities for Rayapuram Referral Hospital Ward No. 154 Rayapuram (Package7)
BCCC/2026-27/OW/WORK_INDENT603
BCCC/2026-27/OW/WORK_INDENT603
Open
Other Works
Two Tender Document System(Two Cover)
BCCC Chamarajapete Division
6 documents required · 6 mandatory
The intending tenderer should submit work done certificate for the following nature of work executed in last five years (2021-22 to 2025-26), the following Prime quantities executed in any last five years: (usually 80% of the peak annual rate of construction)
Availability by owning at least 50% of the required/specified key & critical equipment for this work & the remaining 50% can be deployed on lease/hire basis for all works provided, the relevant documents (commitment agreement etc.,) for availability for this work are furnished
Mandating satisfactorily completed (at least 80% of the contract value) as a prime contractor in similar nature of single work value not less than 50% (Rs.574.00 lakhs) of the tender value. Similar nature of work means the contractor should have completed (at least 50% of the contract value). The intending bidder should submit completion certificate / work done certificate along with the contract certificate copies related to the work certified by the Engineer not less than the rank of Executive Engineer. (Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited) (Work Done Certificate Along with Indent Number)
Achieved a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.2296.00 Lakhs in at least two financial years. The tenderer should submit VAT/GST certificates to confirm the Annual turnover. The certificate should be duly certified by the Chartered Accountant in the turnover format. (Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited)
Liquid assets and /or availability of credit facilities of no less than Rs.344.40 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period)
₹7,500
₹11.5 L
12 Oct 2026
12 Oct 2026
27 Oct 2026
14 Oct 2026
14 Oct 2026
Completion works Viz., Electrification, Water and Sanitary Supply Lift and Other facilities for Rayapuram Referral Hospital Ward No. 154 Rayapuram (Package7)
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable m...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in Matfor RCC roof at below the steel for avoiding concrete cement slurryas per the requirement of Engineer in Charge
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying w...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand including cost of all materials, labour, sc...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing of 2-track 2-panel sliding windows made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermos Plastic Elastomer...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side...
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...
Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 Suspension ...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approve...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requir...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required sm...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm t...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fittin...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain brass threaded fittings This includes jointing of pipes...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Constructing brick masonry chamber of internal dimension 600x450 mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaste...
Providing and fixing brass bib cock of approved quality :13.2.1 15 mm nominal bore
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and fixing Reinforced Concrete covering Slab of 10cm Thick made of M20 with OPC Cement with 20mm and down size graded granite metal coarse 0.70mixed including providing and removing cente...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in...
Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in...
Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in...
Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab.The cond...
Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab.The cond...
Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab.The cond...
Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab.The cond...
Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix...
Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix...
Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix...
Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix...
Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/lconduit entry as required with one coat of primer of approved make etc. 200x200x65 mm
Supplying and fixing PVC/Metal conduit Deep Junction box 19/20mm deep Junction box
Supplying and fixing PVC/Metal conduit Deep Junction box 25mm deep Junction box
Supplying and fixing PVC/Metal conduit Deep Junction box 32mm deep Junction box
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit CC floor
Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...
Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...
Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...
Supplying and fixing S hook made out of 14mm dia MS Rod
Supplying and fixing of Metal Fan box with Round Hook.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor conforming to IS 8130-1984 and (Virgin) PVC Insulation sheathed suitable for work...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 ...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3W...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 ...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 ...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 18...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV
Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box.
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.
Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab.
Supplying way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws. 6 to 10 Way Gang Box
Supplying and fixing of metal clad industrial plugs and sockets 2 Pole earth 250V PLUG 2 Pole earth 2pole earth 250V PLUG
Supplying and fixing of metal clad industrial plugs and sockets 2 Pole earth 250V PLUG 3 Pole earth 440V PLUG .32A
Supplying and fixing of metal clad industrial plugs and sockets 2 Pole earth 250V PLUG 2pole earth 250V SOCKET.32A
Supplying and fixing of metal clad industrial plugs and sockets 2 Pole earth 250V PLUG 3pole earth 440V SOCKET.32A
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bakelite Ceiling Rose.
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder
Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coate...
Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coate...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit brea...
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitabl...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of ...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap...
Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting with poweder coated painting made out of 14SWG MS enclosure. II - Double Door. 16 way SP&N
Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting with poweder coated painting made out of 14SWG MS enclosure. III - Double Door. 4 Way TP & N
Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting with poweder coated painting made out of 14SWG MS enclosure. III - Double Door. 6 Way TP & N
Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting with poweder coated painting made out of 14SWG MS enclosure. III - Double Door. 8 Way TP & N
Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board. 16A-25A 2 pole
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 150 Sqm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 185 Sqm...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 120 to 240 Sqmm
Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 25mm dia
Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia
Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 40 mm dia
Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 45mm dia
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 Sqmm Copper Terminal, Apprx Wt 11 Gm
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 185 Sqmm Copper Terminal, Apprx Wt 158 Gm
Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 150x50mm
Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 300x50mm
Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 450x50mm
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit. The pit should...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm Copper strip
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate
Supplyingand fixing flexible LED Strip Light W Power consumption in 5 ms length CCT6500 degree K, CRI 70. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 ...
Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz & Power fact...
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz & Power facto...
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz & Power facto...
Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swivel...
Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swivel...
Supplying of recess mounting non integral type LED W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI ...
Supplying of recess mounting non integral type LED W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI...
Supplying of recess mounting non integral type LED W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI ...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...
Fixing all types and all capacities of fluorescent/ false ceiling/ spot light/ CFL/ LED fittings indoor on the wall/ ceiling / rafters/ girders using 23/0.0076 twin twisted PVC insulated wires, requir...
Fixing all types and all capacities of fluorescent/ false ceiling/ spot light/ CFL/ LED fittings indoor on the wall/ ceiling/ rafters/ girders using 23/0.0076 twin twisted PVC insulated wires, require...
Fixing a ceiling/ Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary l...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Fixing all types and all capacities of 1x4/ 2x2 LED Light fittings indoor on the wall / ceiling/ rafters/ girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, re...
Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, eq...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protec...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiri...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection ...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leak...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: In Conformance with standards ...
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equ...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 5...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 7...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50...
Supplying and fixing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power ...
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 Amps
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard...
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, eq...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard...
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equ...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard...
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equ...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 5...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard...
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, eq...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50 ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50 ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, eq...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50 ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard...
Fabricating,supplying and mounting MS box made out of 14 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, providing with hinged front cover, equipp...
Supplying 100A rated 3Phase with Neutral bus bar arrangement using required capacity Electrolytic Al strips covered with Heat shrinkable PVC sleves mounted on Phenolic/FRP/DMC insulators which are mou...
Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat with bolts,nuts,washers etc & painted with 2 coats of red oxide Paint& the 2 coats of approved paint 40x40x6mm
Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat with bolts,nuts,washers etc & painted with 2 coats of red oxide Paint and the 2 coats of approved paint 50x50x6...
Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat with bolts,nuts,washers etc & painted with 2 coats of red oxide Paint the 2 and coats of approved paint 50x100x5...
Supplying and fixing 50 - 63 A TPN miniature circuit breaker on the existing MCB distribution board using necessary fixing materials and wiring complete as required.
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 40Amps 4 pole.
Supplying and fixing 6- 32 A DP miniature circuit breaker on the existing MCB distribution board using necessary fixing materials and wiring complete as required.
Supplying and fixing 6A SP miniature circuit breaker on the existing MCB distribution board using necessary fixing materials and wiring complete as required.
S,F and wiring LED Type Panel Board indicating lamps with reqd color.
Supplying, fixing and wiring 0 to 100 A Direct Reading AC
analog type Ammeter.
Supplying, fixing and wiring rotary selector switch suitable for Ammeter.
Supplying, fixing and wiring 0 to 600Volts 96X96mm AC Voltmeter on existing panel/wood board.
Supplying, fixing and wiring rotary selector switch suitable for Voltmeter.
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, eq...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 5...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard...
Fabricating, supplying and erecting swaged tubular pole of height …Mtr having three sections, and providing twocoats of red oxide paint and finished with two coats of enamelled paint of approved qua...
Supplying and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel boaard using necessary bolts,nuts, washers and wiring etc., completee with ac-3 rating and as per IS-13947 40 ...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Fabrication, Supplying, Erection, Testing and Commissioning of 12 Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) ...
Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4 dia telescopic M. S. pipe, with 2 dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. s...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. she...
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
Supplying of Hand gloves. Complete(KPWD ELE SR 2023-24,P.No.93, I.No.15.113 )
Supplying of first aid box. Complete(KPWD ELE SR 2023-24,P.No.93, I.No.15.114 )
Supplying of SAFETY MASK. Complete.(KPWD ELE SR 2023-24,P.No.93, I.No.15.115 )
Supplying of FIRST AID CHART with lamination.Complete (KPWD ELE SR 2023-24,P.No.93, I.No.15.116)
Supplying and installation of RUBBER MAT 1mtrx1mtr-1Omm thick.complete including cost of materials,labour,usage charges of machinery complete as per specifications.(KPWD ELE SR 2023-24,P.No.93, I.No.1...
Supply of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles).
fixing of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles).
Supply of 11 kV, 45 KN Polymeric Insulator.
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials.Supply of Guy Clamp - GI.
Supply of Turn Buckle (GI)(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018).
Supply of Anchor Rod using 12 mm rounds/Guy Rod - GI.
Supply of No. 15 Strain Insulator.
Supply of Guy Wire & GI Wire as per IS-2141.7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM.
Digging of Pit for GUY SET.Ordinary Soil.
Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)
supply of Spiral Earth Electrode.
Providing Spiral Earth Electrode type earthing.
Supply of Caution/Danger Board.
fixing of Caution/Danger Board.
Supply of Anti Climbing Device (12 Mtr GI Barbed Wire).
fixing of Anti Climbing Device (12 Mtr GI Barbed Wire).
Supply of 11 kV, 400 Amps Double Break GOS(Dwg No. BESCOM/GM/QS&S/22 Dtd 24.11.2018).
Fixing of GOS including wiring (11 kV Double Break 400 Amps).
Supply of Single H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole for 63/100/250/500kVA (OH Line) - GI.
Erection of H-Frame.for mounting GOS.
Supply of 11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification.
Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring.
11 kV, 3x95 Sqmm XLPE UG Cable
Cable Termination Kit Outdoor HS Type Suitable for 95 Sqmm Cable
Cable covering tiles 250x125x40mm
Artificial/Manufacture Sand (Extracted from Vol-1, PWD SR Sl No. 62)
RCC humepipes 2000mm long 150mm dia
Collars for RCC hume pipes
GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177)
Route and Joint Indicating Stones
Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1)
Laying of cable in trench
Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10)
Making of cable termination
Covering the cables with tiles
Spreading Sand and forming with Sand round the cable
Laying of RCC humepipes 2000mm long and 150mm dia
Laying of GI pipe 150mm dia
Fixing of Route and Joint indicating stones
Supply of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wir...
Supply, installation, erection, testing and commissioning of HT Panel- 1One Breaker (VL) Panel with Copper Busbar(VCB PANEL)
Erection of HT metering Cubicle on Platform.
Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
Construction of platform (1.5x1.5x1.2) mtr in size stone,cement concrete for erection of Metering cubical,Transformer and Load break switch: Excavation of (1.5x1.5x1) mt pit for foundation providing a...
Supply of Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014.250 kVA, Aluminium Wdg, Star 2 (5 Star)
Erection of 200 - 250 kVA Transformer
4 Way RMU, 2 OD + 2 VL (One Incomer + Two Breakers + One Outgoing)
Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates (Extracted from Item No. 2.1.6 of KPWD SR 2023-24, Volume - 1)
Foundation with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates (Extracted from Item No. 2.1.6 of KPWD SR 2023-24, Volume - 1)
Providing Reinforecement TMT Fe 550/550 D (Extracted from SL No. 69 of KPWD SR 2023-24, Volume - 1)
Providing Plinth with CC 1:2:4 on the Stone Masonary [M-15] Using 20mm Nominal size graded crushed coarse aggregates (Extracted from Item No. 2.1.6 of KPWD SR 2023-24, Volume - 1)
Construction of Stone Masonary (Extracted from Sl No. 5.4 of KPWD SR 2023-24, Volume - 3)
Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., complete. (Extracted from SL No. 69 of KPWD SR 2023-24, Volume - 1)
Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,
Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr
Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and...
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, eq...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator ...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 5...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: In Conformance with standards ...
Design, supplying, erecting testing and commissioning of Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ro...
Providing and fixing Electric Labour Table analyzer as per direction of Engineer in charge
Providing and fixing CTG Machine as per direction of Engineer in charge
Providing and fixing Fetal Doppleras per direction of Engineer in charge
Providing and fixing Multipara Monitor ECG, SpO, NIBP, Temp, Resp as per direction of Engineer in charge
Providing and fixing Syringe Pumps as per direction of Engineer in charge
Providing and fixing Infusion Pumps as per direction of Engineer in charge
Providing and fixing Suction Apparatus 1/2 HP as per direction of Engineer in charge
Providing and fixing Radiant Warmers with resuscitation unit as per direction of Engineer in charge
Providing and fixing Anaesthesia Workstation as per direction of Engineer in charge
Providing and fixing OT Table as per direction of Engineer in charge
Providing and fixing LED OT Light as per direction of Engineer in charge
Providing and fixing Defibrillator as per direction of Engineer in charge
Providing and fixing Electrosurgical Unit table as per direction of Engineer in charge
Providing and fixing Suction Machine as per direction of Engineer in charge
Providing and fixing Instrument Trolleys as per direction of Engineer in charge
Providing and fixing OT Table as per direction of Engineer in charge
Providing and fixing Shadowless OT Light as per direction of Engineer in charge
Providing and fixing Autoclave 12x12 as per direction of Engineer in charge
Providing and fixing Minilap Instrument Sets as per direction of Engineer in charge
Providing and fixing Suction Machine with resuscitation unit as per direction of Engineer in charge
Providing and fixing Neonatal BUBBLE CPAP/HFNC as per direction of Engineer in charge
Providing and fixing Neonatal BUBBLE CPAP/HFNC as per direction of Engineer in charge
Providing and fixing Radiant Warmers as per direction of Engineer in charge
Providing and fixing Neonatal Multipara Monitors as per direction of Engineer in charge.
Providing and fixing Syringe Pumps as per direction of Engineer in charge
Providing and fixing Portable Suction Machines as per direction of Engineer in charge
Providing and fixing Pulse Oximeters as per direction of Engineer in charge
Providing and fixing Infusion Pumps as per direction of Engineer in charge
Providing and fixing ECG Machine 12 CH as per direction of Engineer in charge
Providing and fixing Defibrillator as per direction of Engineer in charge.
Providing and fixing Crash Cart as per direction of Engineer in charge
Providing and fixing Multipara Monitors as per direction of Engineer in charge
Providing and fixing Suction Machine as per direction of Engineer in charge
Providing and fixing Semi-auto Biochemistry Analyzer as per direction of Engineer in charge
Providing and fixing Binocular Microscopes as per direction of Engineer in charge
Providing and fixing Centrifuge as per direction of Engineer in charge
Providing and fixing Laboratory Refrigerator 2-8C as per direction of Engineer in charge
Providing and fixing Incubator as per direction of Engineer in charge
Providing and fixing Haemoglobin Meter as per direction of Engineer in charge
Providing and fixing Digital X-ray System (500 mA DR) as per direction of Engineer in charge
Providing and fixing Portable X-ray Unit as per direction of Engineer in charge
Providing and fixing Ultrasound Scanner with Obstetric Probe as per direction of Engineer in charge
Providing and fixing Horizontal Steam Sterilizer (Autoclave) as per direction of Engineer in charge
Providing and ETO machine as per direction of Engineer in charge
Providing and fixing Hot Air Oven as per direction of Engineer in charge
Providing and fixing Digital Instrument Trolleys as per direction of Engineer in charge
Providing and fixing Portable Sterile Storage Cabinets as per direction of Engineer in charge
Providing and fixing Hospital Beds with Obstetric Probe as per direction of Engineer in charge
Providing and fixing Bedside Lockers as per direction of Engineer in charge
Providing and fixing Wheelchairs as per direction of Engineer in charge
Providing and fixing Digital Stretchers & Trolly as per direction of Engineer in charge
Providing and fixing Portable Nebulizers as per direction of Engineer in charge
Providing and fixing Examination Couches as per direction of Engineer in charge
Providing and fixing ABG MACHINE as per direction of Engineer in charge
Providing and fixing DEFIBRILLATOR as per direction of Engineer in charge
Providing and fixing VENTILATOR PROTABLE as per direction of Engineer in charge
Providing and fixing VENTILATOR ICU as per direction of Engineer in charge
Providing and fixing SUCTION MACHINE 1/2 HP as per direction of Engineer in charge
Providing and fixing MONITORS as per direction of Engineer in charge
Providing and fixing OT TABLE as per direction of Engineer in charge
Providing and fixing Digital OT LIGHT as per direction of Engineer in charge
Providing and fixing OT ANAESTHESIA WORK STATION BASIC as per direction of Engineer in charge
Providing and fixing OT ANAESTHESIA WORK STATION ADVANCE as per direction of Engineer in charge
Providing and fixing TROLLYS FOR DRUGS as per direction of Engineer in charge
Providing and POST OP FUMIGATOR 5 LTR ECO as per direction of Engineer in charge
Providing and fixing OT BAYNER CIRCUITS ADULT as per direction of Engineer in charge
Providing and fixing BOUGIE SET OF 3 STEEL SS as per direction of Engineer in charge
Providing and fixing TONGUE RETRACTOR SET OF 3 as per direction of Engineer in charge
Providing and fixing ETT TUBES 6.00 as per direction of Engineer in charge
Providing and fixing ETT TUBES 6.5 as per direction of Engineer in charge
Providing and fixing ETT TUBES 7.00 as per direction of Engineer in charge
Providing and fixing ETT TUBES 7.5 as per direction of Engineer in charge
Providing and fixing ETT TUBES 8.00 as per direction of Engineer in charge
Providing and fixing ETT TUBES 8.5 as per direction of Engineer in charge
Providing and fixing PAEDDIATRIC CIRCUITS as per direction of Engineer in charge
Providing and fixing LARYNHOSCOPE SET OF 4 as per direction of Engineer in charge
Providing and fixing AMBU BAG ADULT as per direction of Engineer in charge
Providing and fixing AMBU BAG PAEDIATRIC as per direction of Engineer in charge
Providing and fixing LMA - LARYNGEAL MASK AIRWAYS PER PIC as per direction of Engineer in charge
Providing and fixing PORTABLE OXYGEN CYLENDER UNIT as per direction of Engineer in charge
SEWAGE TREATMENT PLANT : Raw Sewage transfer pumps, Vertical centrifugal submersiable pumpsets with CI body and SS Shaft & with mechanical seal type 1 working and 1 standby with Capacity/Head of 4.5 c...
Air blower (Driven by electric motor) Twin lobe air blowers type 1 working + 1 standby with Capacity/Head of 90 cum/ hr. Max. operating pressure 0.50 kg/sqcm. (Blower Make Everest / KPT / KAY) (Motor ...
Fine Bubble diffusers Imported fine bubble with silicon/EPDM membrane in SBR tank, size 63 mm OD X 1000 mm long with SS clamps type (Make:Southern cogen ) (Purpose:Uniform air distribution into SBR ta...
Coarse Bubble diffusers Imported Coarse bubble with silicon/EPDM membrane in Equalisation tank and Sludge holding tank Size 63 mm OD X 1000 mm long with SS clamps type (Make:Southern cogen ) (Purpose...
Sludge re circulation pumps Horizontal centrifugal non clog pump sets with CI impeller type, 1 working and 1 standby with a Capacity/Head of 4 cum/hr at 12 mtr. Head ( Make : Kirlosakar) (Purpose : T...
Filter feed pumps Horizontal centrifugal non clog type pump set with CI impeller and mechnical Seal type, (1 working and 1 standby) with a Capacity/Head of 5 cum/hr at 35 mtr. Head ( Make : Kirlosak...
Bar screen : Type of screen M.S. Epoxy painted construction manually cleaned with flats placed at 10mm C/C with M.S. hard rake with handle all epoxy painted.(Make : GEPS) (Purpose :Screening of Non de...
Pressure Sand filter : Flow 5 cum/hr with working pressure of 3.5 kg/sqcm, Dimensions 800 mm Dia X 1500 Height. MOC MS with Epoxy Coated and Silica Sand Media. (Make : GEPS) (Filtration and removal of...
Activated Carbon Filter : Flow 5 cum/hr with working pressure of 3.5 kg/sqcm, Dimensions 800 mm Dia X 1500 Height. MOC MS with Epoxy Coated and Activated carbon IV-900 grade (Make : GEPS) ( Purpose :F...
Decantar System : Flow 5.5 cum/hr with Floating Tubler Type, Material PP, Dimensions 150mm. (Make : MAX)
Screw pump Capacity of 2 cum/hr at 50 mtr. Head (Make : ALFA) ( Purpose :To pump sludge for sludge dewatering unit for suldge treatment.)
Filter press : Size 470 mm x 470 mm 9 plates approx. Manual type, (Make : Royal precission ) ( Purpose : To dewater the sludge and to form dry sludge which can be easily disposeed off or can be used ...
Hypo Chloride dosing system: Capacity 0-6 LPH (Make : Edose ) ( Purpose : For disinfection of treated water.)
Inter connecting pipes & fittings : a) Air blower line except submerged air piping, type GI C Class, (Make : Jindal / TATA )
Inter connecting pipes & fittings : b) All other pipe line for pumps UPVC type, (Makes of Astral/ Finolex/Prince/ equivalent)
Inter connecting pipes & fittings : c) Float level switch (Make : Laptron/ Minilec/ equivalent )
Inter connecting pipes & fittings : d) Sub merged air grid pipe and fittings CPVC type, (Makes Astral / Prince / Finolex / equivalent )
Inter connecting pipes & fittings : e) Pressure guage ( Make : H Guru/ Warre/ equivalent )
Inter connecting pipes & fittings : f) Rotameter (Make : Aster/ Kranthi/ Pratham/ equivalent)
Inter connecting pipes & fittings : g) Valves ( Make : Mark / sant / equivalent )
Inter connecting pipes & fittings : h) Pipe supports : Galvanised M.S. section of required size
Consumables : a) Electrical Cables (Make:Poly cab / Finolex / Gloster )
Consumables : b) Cable tray / Z angle type M.S. hard dip GI
Electrical control panel :
Erection and commissioning of the Sewage Treatment Plant including Transportation
Supply, erection, testing & commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering,adequate LPM at required head. when running at 2900 rpm directly c...
Supply, installation, testing & commissioning of diesel engine driven pump, horizontal mounted, Horizontal spiltcase centrifugal single stage pump, capable of delivering required flow at required head...
Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suita...
Supply, erection, testing and commissioning of Fire Fighting panel cubicle type made out of 14/16 Swg MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skeleton or ...
Incoming feeder for 400A TPN MCCB with 400 Amps. TPN Al. Bus bars with color coded heat shrinkable PVC sleeves, RYB indicating lamps with individual MCB control. Suitable Mulit Fuction meter with CTs ...
Supplying, installing, testing and commissioning approved make C.I. Gate valves as per IS: 780 / 14846 with flanges, bolts, nuts, washers, gaskets etc. complete etc., complete as per specificaiton wit...
Supplying, installing, testing and commissioning approved make C.I. Gate valves as per IS: 780 / 14846 with flanges, bolts, nuts, washers, gaskets etc. complete etc., complete as per specificaiton wit...
Supplying, installing, testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete etc., complete as per specificaiton with all lead and ...
Supplying, installing, testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete etc., complete as per specificaiton with all lead and ...
Supplying Installing, testing and commissioning of Gun metal BALLVALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complete . Strai...
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange...
Supplying installing, testing and commissioning of PN16 CI "Non Return Valve" confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all l...
Supplying installing, testing and commissioning of PN16 CI "Non Return Valve" confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all l...
Supplying installing, testing and commissioning of PN16 CI "Non Return Valve" confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all l...
Pressure guage of 150 mm dia including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec. etc., complete as per specificaiton with all lead and lift, loading unloadin...
Pressure Switch including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hir...
Supplying fixing and testing of Air cushions vessel. Fabricated out of 8mm thick It is a 250 mm Dia MS pipes the ends should be dished 1.2M high installed vertically on suitable legs. Flange connectio...
Fire fighting Electrical supply of the following XLPE armoured cable 1100V Grade with ISI mark standard / Soild, alumnimum conductor complete with crimping type lugs and Glands etc completed. 3.5C x 9...
4 C x 16 Sqmm. Main panel to Jockey pumps - Rs. 1,83,442/KM
12 C x 2.5 (MARKET RATE) Sqmm.main panel to Diesel engines
3 C x 1.5 Sqmm.for Instrumentation
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3mm GI strip for jockey pump
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40 x 6mm GI Strip for electric motor pump and DG pump
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 50 x 6mm GI Strip for panel
Supplying and Installing follwing size of perforated painted with powder coating M.S.Cable trays with perforation not more than 17.5, in convenient sections, joined with connectors, suspended from the...
Supplying and Installing follwing size of perforated painted with powder coating M.S.Cable trays with perforation not more than 17.5, in convenient sections, joined with connectors, suspended from the...
Supplying, installation, testing & commissioning of 12V AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type for D.G. sets. Low maintenance batteries, plate ty...
Supplying, installing, testing and commissioning approved make heavy duty (Class C) GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, check nuts,...
Providing and fabricating MS supports using channel, angle, plates pipes, etc., to take the load of number of pipes and the dia of the pipes as per specification and drawings. Rate quoted shall includ...
Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machi...
Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machi...
Supplying Installing, testing and commissioning of 63mm mm dia Single headed Gun mental Hydrant Valve with flanged inlet stop valve, spindle and cast iron hand wheel. It has a female instantaneous ou...
Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal cou...
Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as p...
Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted ...
Supplying Installing, testing and commissioning of Hose reel cabin
Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at ou...
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complete
Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete etc., complete as per specificaiton with all lead and...
Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete etc., complete as per specificaiton with all lead and...
Supplying Installing, testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia. including cost of materials, labour, usage charges of machine...
Supplying Installing, testing and commissioning of 100mm dia 2 way Fire brigade inlet connection of 2 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per sp...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ram...
Supplying, installing, testing and commissioning approved make heavy duty (Class C) GI pipes and fittings confirming to IS 1239 PI and II, Malleable Specials such as tees, long radius bends, check nut...
Supplying Installing, testing and commissioning of, pendent Type/Upright Type ,Standard Response Standard Coverage, Sprinkler, K5.6(80),1/2NPT, 68 Degree C, Chrome finish, UL listed.
Stainless steel braided flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1000 mm long 25 mm dia with union / reducer collar, clamps etc as req...
Stainless steel braided flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm dia with union / reducer collar, clamps etc as req...
Supplying, installing, testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete etc., complete as per specificaiton with all lead and ...
Supplying, installing, testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete etc., complete as per specificaiton with all lead and ...
Supplying, installing, testing and commissioning flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured seperately...
Supplying Installing, testing and commissioning of hydraulically operated sprinkler Gong Valve with water meter gong bell and trims as required, pressure gauges drain Valve, ball Valves check valve, s...
Providing 2 Kg C02 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Discharge Time less t...
Providing 4.5Kg Co2 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140...
Providing 9 Ltr Fire Extinugisher Aqueous Film-Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight 6.10kg Can Height 615 MM, Diameter 175 MM, Discharge Time les...
Providing 6kg Fire Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, ...
Green mist Extinguishers : Providing 6 Ltr Watermist technology base, Stored pressure type, Rating -8A. 34B & 40F, Mild steel body t, Tamper- proof safety seal, Effective on Class-A, Class-B, Class-...
Supply, installation, testing and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character / 240X64 Pixel / 7inch Touchscree...
Supply, Installation, Testing & Commissioning of Network Active Repeater Panel with 1500 Character/ 240X64 Pixel/ 7inch Touchscreen. The LCD shall Display all events/ detectors, devices status of comp...
Supply, install, test and commissioning of analogue addressable Multisensory having three sensors OH2 i.e. one optical and dual heat sensor Static and ROR both, it shall have multiple modes with min f...
Supply, installation, testing and commissioning of analogue addressable dual heat detector and standard base, It shall have multiple modes with min five different heat sensitivity adjustment from 57 D...
Supplying Installing, testing and commissioning of Response Indictor constists of twin LED with electronic circuit work on 24 DC enclose in PVC retangular. complete including cost of materials, labour...
Supply, Installation, Testing and Commissioning of Analogue Addressable loop powered Sounder and Beacon with inbuilt isolator and having Min 15 distinct sound patterns/ multitone to indicate Exit door...
Supply, install, test and commissioning of Analogue addressable Manual Call Point (Resettable Type) with inbuilt isolator and LED indicator, designed for IP44 requirements and approved to operate in 1...
Supplying Installing, testing and commissioning of electronic Hooter, it conists of electronic circuit to give dual Fire alaram sound with works. 24V DC with speaker all encased in suitable in MS 16 g...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. including cost of materials, ...
Supply, install, test and commissioning of Analogue addressable Monitor Cum Control (Input/Output) module (1and1) with inbuilt relay and isolator with LED indicator, approved to operate in 10C to 55C ...
Supply, installation, testing and commissioning of Analogue Addressable Zone isolator module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions...
Supply, installation, testing and commissioning of Addressable Monitor module for monitoring flow switch, supervisory switch (UL/FM Approved )
Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured
Supplying heavy gauge PVC conduit pipe 19/20dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted woo...
Supplying and Installing follwing size of perforated painted with powder coating M.S.Cable trays with perforation not more than 17.5, in convenient sections, joined with connectors, suspended from the...
Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, ...
Providing and Fixing evacuation plan of size A3 made out to Acrylic sheet of 3mm thick and fixing with Stainless Steel finished studs etc. complete including cost of materials, labour, usage charges o...
Supplying Installing, testing and commissioning of P.A.System console panel with push button with speaker and indictoron Accomdated in M.S.Cabinet with painting including cost of materials, labour, us...
P.A.System amplifier 250W RM S out put with complete wiring and controls accessable form front
Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, t...
Supplying Installing, testing and commissioning of MIKE suitable toI.A.System. Complete
Supplying, erecting, testing and commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete ...
Supplying, installation, testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 26 AH capacity
Supply and laying of 2 x 1.5sqmm fire alarm armored cable, 600/1000V rated with annealed copper conductor having XLPE isulation, Steel wire armouring & FRLS outer sheath complete as required.
Supplying heavy gauge PVC conduit pipe 19/20dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted woo...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
P7 KW4 Tender.pdf
Tender Document • 0.79 MB
TN 14 C.pdf
Others - Tender Notification • 1.67 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .