SPL REPAIRS / REPLACEMENT OF EXISTING CEMENT SHEET ROOF WITH GALVANIZED SHEET AT QTR NO 39/1 TYPE V DGQA RESI, OTM BLDGS OF UNITS AND PROVN OF WINDOWS WITH ALUMINUM SLIDING WINDOWS WITH FLY PROOFING MESH AGE B/R (S) NO II OF GE (S) SECUNDERABAD

Amount

Dismanting asbestos cement (corrugated, semi-corrugated etc.) sheets in roof covering complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre painted gal valume aluminium zinc coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets complete all as specified and directed.

S&F false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out og GI flat 40 x 3 size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.

M&L for Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid with screws as per manufacturers instructions complete all as specified and directed.

Dismantling framed wooden purlin/Rafter work of any description sectional area exc 40 Sqcm not other wise provided for complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A complete all as specified and directed.

Fixing only roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A obtained from item No-8.00 here-in-above complete all as specified and directed.

M&L for preparation of old steel & iron surface of any description, not other wise described, over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for providing cement concrete type B-1,1:2:4 (using 20mm graded crushed stone aggregate) as in copings, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for brick work with flyash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc incl removing of debrie all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces, finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in CM( 1:4) on block walling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil emulsion distemper over a coat of cement primer complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

S&F Powder coated Aluminium anodized frame work for door / windows / ventilators with one or more rebates including joining heat for fixing and Removing the old frame with shutters completely and making the surface good using Cement mortar 1:4 for fixing new windows etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panels of joineries with stainless steel wire staples complete all as specified and directed.

S&F Powder coated aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as specified and directed.

M&L for complete removal of old treatment of any description and roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc and applying one coat of neat cement slurry @ 3.00 kg/Sqm complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) Type B0 by (using 12.5mm graded crushed stone aggregate) as levelling course in roof, where required over slabs including necessary form work and finishing the exposed surfaces fair and even without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in base of water tank on roof surface complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound @ 2% of the total weight of cement or as per manufacture's instructions as in roof and chajjas, finished the surface fair and even complete all as specified and directed. Note : Supply of water proofing compound will be measured and paid separately under relevant item.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for priming the plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm and applying hot bitumen VG-30 @ 1.20kg /sqm and applying APP based polymeric membrane min weighing 3.0 Kg per sqm and min 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm ) and applying bitumen base aluminium paint @ 0.20 kg/sqm on primed surface complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks capacity exc 250 & n exc 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantling of existing damaged water tanks complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks capacity exc 500 & n exc 1000 ltrs(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantling of existing damaged water tanks complete all as specified and directed.

S&F in repairs 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for new tanks screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and directed.

S&F 20mm GI water tubing medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors including taking up or down old steel tubing complete all as specified and directed.

Taking down rain water pipes of any description and any size any pattern incl all fittings heads, shoes bends etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length fixed to walls/laid in floors/trenches complete all as specified and directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints incl incl all fittings heads, shoes bends etc complete all as specified and directed.

M&L Preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of Brick or stone masonry built in cement mortar complete all as specified and directed.

M&L for brick work with Fly Ash bricks built in CM 1:4 straight or curved on plain exceeding 6m mean radius complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in two layer ( 10 + 5 mm) in CM 1:4 on fair faces of brick or concrete surface and 2nd layer 5 mm thick with Water Proofing Compound @ 3% of total weight of cement for 5mm thick surfaces or as per manufacturer's instruction and finishing the surfaces even and smooth without using extra cement in patch work at various places incl necessary formwork complete all as specified & directed. (Note : WPC Shall be measured and paid seperately)

M&L for preparation of newly plastered surface of wall and applying two coats of Dr Fixit Rain coat over a coat of prime seal primer complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper over one coat of cement primer including 3 mm thick birla white putty surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint over a coat of alkali resistant primer on newly plastered surfaces of walls, pilasters, roof projections, facias, drops, chajjas,etc complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of surfaces of wall and applying necessary Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of Oil bound distemper of any tint complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on ceilings complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description,not other wise described,over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sq.m and n.exc. 2.00 Sq.m each complete all as specified and directed.

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 sqm complete all as specified and directed.

Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete

M&L for mild steel works as in bands, straps, supports or stays for rainwater , ventilating pipes, including bolts, if required; hooks (stay), heavy for large gates, hook and pintle hinges; large hasps and staples; chains,hand made sliding bolts; clamps; hold fasts; wall ties, hooks for handing fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar articles confirming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with paticle board core in frame at site as per specification & drawing complete all as specified and directed.

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as specified and directed.

S&F 35 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc completle all as specified and as directed.

S&F 100mm long stainless steel Butt hinges complete all as specified and directed.

S&F 100mm long MS Medium weight Butt hinges cold rolled complete all as specified and directed.

S&F 75mm long MS Medium weight Butt hinges cold rolled complete all as specified and directed.

S&F in repairs 30mm width flaps of Continuous (piano) hinges,mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F hasp & staple 100mm size aluminium anodised fixed with screws complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and directed.

S&F 100mm long Extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S&F 150mm long Extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300mm long MS ordinary rat tail rod pattern springs inc roller & roller plate complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue anodised with hard steel spring fixed complete all as specified and directed.

S&F in repair 150mm long floor door stopper of aluminium alloy body and tongue anodised with hard steel spring fixed complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane Including hacking out old broken glass complete all as specified and directed.

S&F Powder coated Aluminium anodized frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified and directed.

S&F Powder coated anodied aluminium window and ventilator shutter ,side hung type without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats ,glazing clips rubber packing anodised aluminium snap beading ,screws,anodised aluminium fitting such as peg stays 150 mm long (1 no),hinges typeB-21 100mm long (2 nos) suitable handle (1no) complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete without glazing bars, dovetailed or welded including taking down the old window complete all as specified and directed.

S&F MS Framed work such as Gates,grills or gratting etc with ends of bars welded of any size and any design conforming to Fe 290 Grade E-165 complete all as specified and directed.

M&L for preparatioin of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Welding in repairs to the thickness exc 6mm but n. exc 9mm steel section, welded length n. exc 2.5 cm in each length etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick renderering in CM 1:4 for backing complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) tiles machine cut bedded and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thik screed bed in CM 1:6 complete all as specified and directed.

Rounding to edges of stones slabs one edges,such as in steps, cooking platforms and similar situations complete all as specified and directed.

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including its taking down complete all as specified and directed.

S&F PVC ( SWR) floor trap,75mm outlet dia plain with grating including joining with solvent cement complete all as specified and directed.

S&F in repair WHB vitreous china (flat back or angle back type ) including cutting for pinning in ends size 550x400 mm including brackets,waste pipe ,coupling ,PVC connection pipe and CP pillar tap complete all as specified and directed.

S&F in repair WHB vitreous china with pedestal ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP pillar tap complete all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl P or S trap with flat bottom and mild steel chromium plated or aluminised hinging device and flush pipe of low density PVC 32mm dia for low level flushing cistern complete all as specified and directed.

S&F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed.

S&F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia complete all as specified and directed.

S&F in repairs, CP health faucet with 01 mtr tube and hook complete all as specified and directed. Make :- Jaquar cat No ALD-579 or equivalent in other makes specified in PS

S&F two way bib cock 15 mm dia chromium plated fancy type complete all as specified and directed.

S&F in repairs brass CP basin mixer 15mm bore for mixing Hot and Colder water screwed down for iron pipe complete all as specified and directed.

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm complete all as specified and directed. Make: Prayag or its equivalent

S&F Tubular Towel rail 20mm dia D type 60 cm long fixed between flanges in repairs with brass cromium plated incl all fitting & fixtures complete all as specified and directed.

S&F in repairs vitreous china Soap Holder (Brass) fixed to walls with brass chromium plated screws incl all fitting & fixtures complete all as specified and directed.

S&F Toilet Paper Holder vitreous china box type with cover fixed to walls with brass chromium plated screws in repairs incl all fitting & fixtures complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair 15mm bore Bib taps, cast copper chromium plated alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs Bib taps 15mm standard of PTMT and any colour screwed for iron pipe complete all as specified and directed.

S&F in repairs 125 mm size brass chromium plated shower roses /shower arms with or without swivel joints including fixing to steel pipe or union of 15 mm dia complete all as specified and directed.

S&F in repair 15 mm bore stop valves, fancy type cast copper alloy chromium plated with long shank and cup (Concealed type) screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Angle cock fancy type brass chromium plated screwed one ends for iron pipe or for unions and fixed 15mm dia pipes complete all as specified and directed.

S&F in repair Chromium plated Grating doom 150 mm size complete all as specified and directed.

S&F Stainless Steel Curtain rod 25mm dia along with knobs & brackets incl all fitting & fixtures complete all as specified and directed.

S&F High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

S&F stainless steel Kitchen plate rack of grade 304, weight not less than 3 kg and size 34"x35"x9" complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers, waste coupling and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420 mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F modular kitchen 710 grade marine plywood with necessary hittich tandum boxes with soft closures and Stainless steel handles and soft draw channels inner 8mm thick and 1 mm thick laminate glossy or mat finish with necessary stainless baskets for kitchenware complete all as specified and directed. Note : Front face area only will be measured for payment)

Supply and fix "in repair" CP Quarter Turn Sink Cock with regular swinging spout ( wall mounted model) with wall flange complete all as specified and directed. Make : Jaquar cat No. FLR-5347N or equivalent in other makes specified in PS

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in base/flooring, Plinth protection finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floors finished even and smooth with using extra cement complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed.

M&L for Concealed Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc complete all as specified and directed for: (a) One light point controlled by one, one way switch 5A, SP

All as per item No-132 here-in-before but for one ceiling / exhaust fan point controlled by one, one way switch

All as per item No-132 here-in-before but for one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

All as per item No-132 here-in-before but for one 3 Pin 5 Amps switch socket Independt board

Description all as per item No 133 here-in-before but using 2.5 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed

M&L for surface type Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc complete all as specified and directed for: (a) One light point controlled by one, one way switch 5A, SP

All as per item No-137 here-in-before but for one ceiling / exhaust fan point controlled by one, one way switch

All as per item No-137 here-in-before but for one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

All as per item No-137 here-in-before but for one 3 Pin 5 Amps switch socket Independent board.

Description all as per item No 137 here-in-before but using 2.5 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed.

M&L for Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through and including new casing caping, including provision of pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc complete all as specified and directed for: (a) One light point controlled by one, one way switch 5A, SP

All as per item No-142 here-in-before but for one ceiling / exhaust fan point controlled by one, one way switch

All as per item No-142 here-in-before but for one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

All as per item No-142 here-in-before but for one 3 Pin 5 Amps switch socket Independt board

S&F switch piano flush type multipurpose 2/3 pin 5 amps, 230 volts complete all as specified and directed

S&F socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts complete all as specified and directed

S&F switch socket combination flush type multipurpose 2/3 pin 5 Amps, 230 Volts complete all as specified and directed

S&F switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified and directed.

S&F ceiling fan regulator step socket type AC 240 volt suitable for 1200 mm sweep complete all as specified and directed.

S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

S&F Vertical loadline type TPN DB 4 way double door with fixed magnetic setting for current rating of 100 Amps 16 KA (MCCB TP volts AC 3 phase 50 Hz ) confirming to IS specification made out of CRCA sheet housing duly powder coated & confirming to IS specification including taking down old unserviceable complete all as specified and directed.

S&F MCCB 415 V,16KA,100 A 4 pole suitable for DB including the existing unserviceable one and making good the disturbed surface to match with the existing surface complete all as specified and directed.

S&F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including taking down old unserviceable complete all as specified and directed.

S&F sheet metal enclosure MCB DB SPN 12 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including taking down old unserviceable complete all as specified and directed.

S&F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and directed.

S&F MCB SPN 230V suitable for fixing on MCB DB of capacity 63 Amps complete all as specified and directed.

S&F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A(AC Box) complete all as specified and directed.

M&L for concealed Submain wiring with two single core 6 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M&L for concealed Submain wiring with two single core 4 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and directed.. Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M&L Submain wiring with 4 runs of single core 10 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 32mm dia including one run of single core 10 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and directed. Note:-four runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

S&F Vertical loadline type TPN DB 4 way double door with 160A fixed magnetic setting for current rating of 100 Amps 25 KA 100A (MCCB TP volts AC 3 phase 50 Hz ) confirming to IS specification made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and directed.

S&F wall mounted box type LED of 20 watt with LED Lamp, with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and directed.

S&F wall mounted LED batten of 10w with LED lamp complete all as specified and directed.

S&F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed.

M&L bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe Light grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe med grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of Part-I and connection to earth test point complete all as specified and directed incl testing on completion. Note :-Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and rewinding of the ceiling fan with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing for wall mounted fan complete including replacement of worn out/defective parts such as capacitor, sealed ball bearing, rubber bushes , split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling and refixing in original position with provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of wall mounted fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified.

Disconnecting and removing exhaust fan upto 450mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and rewinding of the ceiling fan with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing for wall mounted fan complete including replacement of worn out/defective parts such as capacitor, sealed ball bearing, rubber bushes , split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling and refixing in original position with provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked , 20 mm bore with conduit accessories for Concealled wiring mount on wall or fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness including back plate and cover plate for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc complete all as specified and as directed for one light point controlled by one one way switch 5A, SP. Note: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth.

All as per item No-173 here-in-before but for one ceiling / exhaust fan point controlled by one, one way switch and regulator

All as per item No-173 here-in-before but for one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

All as per item No-173 here-in-before but for one 3 Pin 5 Amps switch socket Independt board

All as per item No-173 here-in-before but for one Bell point controlled by one, bell push

All as per item No 173 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as complete all as specified and directed.

S&F Modular Switch 1 way 6A, 1 Module capacity 230 volts complete all as specified and directed.

S&F Modular Switch 1 way 16A, 1 Module capacity 230 volts complete all as specified and directed.

S&F Modular socket, 6A-2/3 combined 2 module of capacity 230V complete all as specified and directed.

S&F Modular socket, 6/16A -2/3 combined 2 module of capacity 230V complete all as specified and directed.

S&F Modular bell push 6A 1 module complete all as specified and directed.

S&F Modular ceiling fan regulator 2 module step type AC 240 volt suitable for 1200/1400 mm sweep complete all as specified and directed. Note:-For item No-173 to 183 Modular cover plate with frame Modular metal flush box will be inclusive of rate quoted.

S&F bell (buzzer/ding dong) working on 230 volts AC Supply complete all as specified and directed.

S&F vertical type MCB DB TPN 4 way double door with 160A rated bus bar 415V suitable for end including 63A TPN isolator as incommer and 12 outgoing SP MCB s with magnetic locking system complete all as specified and directed. Note:- MCB SP shall be measured and paid seperately under relevant item)

S&F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S&F sheet metal enclosure MCB DB SPN 4 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S&F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and directed.

S&F MCB SPN 230V suitable for fixing on MCB DB of capacity 63 Amps complete all as specified and directed.

S&F slim surface mounted LED round type fitting of 9W complete all as specified and directed.

S&F 12 Watt LED Bulb with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and directed.

S&F decorative wall light fixture made up of polycarbonate suitable for 9w retrofit LED lamp B22 base complete all as specified and directed.

S&F 10 watt bulk head luminaire suitable for outdoor with high brightness giving glare free light and including taking down complete all as specified and directed.

S&F Telephone socket modular type RJ11 with shutter complete all as specified and directed.

S&F TV co-axial socket outlet modular type complete all as specified and directed.

S&F rigid non-metallic PVC conduit medium grade 20mm dia and conduit accessories concealed in wall/ceiling for TV/Telephone cable etc complete all as specified and directed.

Disconnecting and removing exhaust fan of 300 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and rewinding of the exhaust fan with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing for exhaust fan complete including replacement of worn out/defective parts such as capacitor, sealed ball bearing, rubber bushes , split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling and refixing in original position with provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and directed.

Taking down the geysers of capacity 25/50 litres from its mounting position by removig all water and electric connections and deassembling the geyser and carrying out the following works, (a) Descaling,cleaning the inner tank thoroughly and there should not be any bad taste of water.(b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat,base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system(ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the geyser and making eletric connections,inlet and outlet water connections and testing and checking of all water inlet,outlet valves connected with geysers complete all as specified and directed. Note: Defective/worn out parts if required shall be measured and paid seperately under relevant items in this schedule.

S&F metal type vertical mounted electric water heater , storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 stars rated complete with all accessories such as safety valve, vaccum and pressure release valve and snap action thermostst , thermal cutout , non return devices, 240 volts with plug top, confirming to relevant IS complete all as specified and directed.

Supply and laying steel water tubing , medium grade, galvanised of size 15 mm bore , ISI marked including all ISI marked fittings such as tees, bends, elbow, reducers, unions etc fixed complete to walls and ceilings or laid in floors complete including cutting the existing pipe of any size complete all as specified and directed.

S&F gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for iron pipe or for union suitable for pipe 15 mm bore complete all as specified and directed.

S&F PVC connecting pipe 45 cm long with two no.SS brass check nuts and rubber washers suitable for 15 mm dia GI pipe for hot/cold water connection for geysers complete all as specified and directed.

S&F Bib taps chromium plated with crutch or butter fly handle 15 mm dia screwed for iron pipe or for brass ferrule and fixed including cutting of GI pipe complete all as specified and directed.

S&F Exhaust fan metal body 225 mm sweep with metallic louver including connecting up of PVC insulated copper conductor multistranded cable of suitable size as recommended by the manufaature from ceiling rose to connector complete including provisio of HDPE high grade plastic net 800 GSM hole size one inch thickness 3mm green colour on the outside wall complete all as specified and directed.

ATUL ENTERPRISES (BID ID -3052850)

Sai construction & services (BID ID -3058042)

M/S DIVIJA BUILDERS (BID ID -3067672)

K LAKSHMAN SINGH AND CO (BID ID -3056777)

VACON INFRASTRUCTURES (BID ID -3059445)

Sri venkateswara Electricals (BID ID -3057561)

harshraj and co (BID ID -3062233)