Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | ₹37.2 L Quoted ₹37.7 L | L1 | Accepted-AOC LOWEST |
| 2 | L2₹41.4 L+₹3.7 L (9.79%)Rejected-Finance SADAR BAZAR DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | ₹41.4 L+₹3.7 L (9.79%) | L2 | Rejected-Finance Being other than L1 |
| 3 | L3₹42.5 L+₹4.7 L (12.6%)Rejected-Finance B 150 GROUND FLOOR BACK SIDE PANDAV NAGAR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | ₹42.5 L+₹4.7 L (12.6%) | L3 | Rejected-Finance Being other than L1 |
| 4 | L4₹43.4 L+₹5.7 L (15.1%)Rejected-Finance | ₹43.4 L+₹5.7 L (15.1%) | L4 | Rejected-Finance Being other than L1 |
| 5 | L5₹43.4 L+₹5.7 L (15.1%)Rejected-Finance SULTANPUR NEAR POLICE CHAUKI DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | ₹43.4 L+₹5.7 L (15.1%) | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
26 Aug 2021, 6:00 pmClosed
GE DANAPUR
GARRISON ENGINEER DANAPUR, PATNA 801503
REPAIR TO SANITARY FITTING PLUMBING WORK AND REPAIR TO WALL FLOOR TILES INCLUDING WATER TANK CLEANING ETC AT BRC PERIODICAL SERVICES TO CERTAIN BLDGS AT MUZAFFARPUR AND DAY TO DAY MAINT OF OFFRS JCOS ORS MD ACCN AND OTM ACCN OF DANAPUR CANTT
2021_MES_466025_1
GE/DNR/T-48 OF 2021-22 / 8520/E8
Open Tender
Civil Works
Item Rate
270 days
DANAPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE DANAPUR
₹84,000
Yes
11 Oct 2021
7 Aug 2021
28 Aug 2021
7 Aug 2021
26 Aug 2021
21 Aug 2021
7 Aug 2021 - 20 Aug 2021
Amount
Cleaning, removing all scale, dust, dirt and elgy using wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching powder solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black/white paint on white/black base on tank "Tank cleaned on ____ Dt_____". Capacity 500 Ltrs complete all as specified and directed. .
All as per item No 1 above but capacity 1000 litres.
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling of floor, walls, roof tiles including bedding but not backing and rubbish off permises complete all as specified and directed.
Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed in CM 1:6, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) etc complete all as specified and directed.
M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving tiles complete all as specified and directed.
M&L for 450x350 x7 mm thick glazed ceramic tiles as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.
Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed.
M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.
M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.
Taking down cement plaster on wall/ceiling/roof etc incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed.
M&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and fair (Without using extra cement) complete all as specified and directed.
M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement complete all as specified. (Note : WPC will be measured & paid for separately).
M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete.
Supply only water proofing compound (liquid),ISI marked.
Taking up or down steel tubing & connections dia of pipe 15mm etc complete all as specified and directed.
Taking up or down steel tubing & connections dia of pipe 20mm etc complete all as specified and directed.
S&F Tubes, ‘medium grade’ galvanized iron, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed.
S&F Tubes, ‘medium grade’ galvanized iron, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete all as specified and directed.
Fixing only 15 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- old pipe shall be used retrived from srl item No. 21
Fixing only 20 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- old pipe shall be used retrived from srl item No. 22
Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F in repair chromium plated central hole basin mixer with round spout without popup waste system with 10 mm dia, 450 mm long braided hoses complete all as specified and directed.
S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete.
S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.
S&F vitreous china pedestal for WHB as per suilable for WHB size 550x400 mm complete.
S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) cascade type of size 365 X 635 X 770 mm coloured with cistern (with twin flush fittings) complete including seat cover and fixing of flushing cistern, brackets, flushing pipe etc, fixed in repairs, complete all as specified and directed (Make : Jaquar cat part no CNS WHT 353N, CNS WHT 203) or equivalent as approved by GE
S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.
S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) complete all as specified and directed
S&F repair vitreous china urinals bowl type flat back, size 465 x 355 x 265 mm, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe complete all as specified and directed .
S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.
S&F in repair brass chromium plated health faucet for EWC with 8 mm dia PVC pipe 1.2 m long including nut/washer complete all as specified and directed.
S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts and washers complete all as specified and as directed.
S&F in repair bib tap 15 mm bore fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed.
S&F in repair pillar tap 15 mm bore fancy type chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete all as specified and directed.
S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed .
S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.
S&F in repair CP two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.
S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete all as specified and directed. Make-Prayag (Cat No BEA-44) or equivalent as approved by GE
S&F in repair stainless steel soap dish, of standard size and shape complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed.
S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed.
S&F in repair chromium plated overhead shower rose swivel type 80 mm with CP arms 300 mm long complete all as specified and directed.
S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.
S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.
S&F chromium plated toilet paper holder with flap complete all as specified and directed. Make : Prayag Cat No BA-08 or equivalent as approved by GE
M&L for RCC 1:2:4 B-1 type (using 20 mm graded stone aggregate) as in kitchen platform, shelves including necessary form work complete all as specified and directed.
M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.
Taking down PVC/AC pipes (including all fittings) complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110 mm dia complete all as specified and directed.
~Ditto~ all as per Srl item No 59.00 above but 75 mm bore complete all as specified and directed.
~Ditto~ all as per Srl item No 59.00 above but 50 mm bore complete all as specified and directed.
S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.
M & L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed.
S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed.
M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed.
S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed.
S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.
~Ditto~ all as per item Srl No. 68.00 above but 75mm bore complete all as specified and directed.
S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.
S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete
S&F in repair CP/PTMT grating 100 mm size (ISI Marked) complete all as specified and directed.
Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs complete all as specified and directed.
Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed.
S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in positioncomplete all as specified and directed (specified in SSR Part-I).
~Ditto~ all as per item No. 75.00 above but 1000 Ltrs capacity.
S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed.
S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L for applying two coats of oil bound distemper on newly plastered surface of wall over 3mm thick wall case putty over a coat of primer including preparation of surfaces complete all as specified and as directed
M & L for preparation of newly plastered surfaces of ceiling and applying 02 coats of oil bound distemper over and including 2 mm thick wall care putty including preparation of new surface complete all as specified and as directed
M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 in cement sand mortar with and including integral water proofing compound as per manufacturer's instruction both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded concrete complete all as specified. Note:- Concrete shall be measured and paid separately.
M&L PCC type C2, 1:3:6 (40 mm graded aggregate) as in sunken slab filling complete all as spd and as directed
M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.
M&L for 10 mm thick cement plaster on fair faces of bricks/concrete surfaces with cement mortar 1:3 finished even and smooth (without using extra cement) complete on ceiling complete all as specified and directed.
M&L for prepration of newly plastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and directed.
M&L for two coats of white washing on new surfaces in ceiling incl preperation complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of walls any description by washing, rubbing down and applying two of Weather proof paint complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying two coat of white wash complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying two coat of white wash complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of walls any description by washing, rubbing down and applying one coat of cement base paint complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of walls any description by washing, rubbing down and applying two of cement paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall for complete removal of existing treatment by scraping with metal plate, wire brush etc and applying two coats of distemper oil emulsion, white or tinned over and including a coat of Birla / JK Putty 3 mm thick complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of walls any description by washing, rubbing down and applying two coat of distemper oil emulsion, white or tinted complete all as specified and directed..
M&L for preparing old decorated plastered or unplastered surfaces of ceiling any description by washing, rubbing down and applying two coat of distemper oil emulsion, white or tinted complete all as specified and directed.
M&L for preparing old painted surfaces of wood and wood based materials of any description not otherwise descriped over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted surfaces of wood and wood based materials of any description not otherwise descriped over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L obliterating old writing of any description, n.exc. 0.1 sqm, with synthetic enamel paint to match existing work and rewriting existing letter complete all as specified and directed.
M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of Aluminium Paint complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.
Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.
M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed. Make of Cable : Polycab / Havells / Finolex and Make of PVC conduit : Plaza / Harsh / Kalinga / AKG :-
One light / fan point controlled by one switch
One bell point controlled by one bell Push
One 5 Amps socket outlet point controlled by one switch on same board with other switches.
One 5 Amps socket outlet point on independent board controlled by one switch.
~Ditto~ all as per Item No. 104.00 above but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15/16 Amps socket point on independent board controlled by one switch complete all as specified and directed.
M & L for Point wiring with PVC insulated and unsheathed electric cable of 1100 volts single core having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including non metallic rigid PVC casing caping double lock system not less than 25mm base size with all fitting and fixing accessories and with 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to earth dolly by providing suitable lugs including MS boxes for mounting switches. sockets etc complete for the following. Make of Cable : Polycab / Havells / Finolex and Make of PVC conduit : Plaza / Harsh / Kalinga / AKG :-
One light / fan point controlled by one switch.
One bell point controlled by one bell Push
One 5 Amps socket outlet point controlled by one switch on same board with other switches.
One 5 Amps socket outlet point controlled by one switch on independent board.
~Ditto~ all as per item No. 106.00 above but with 2.5 Sqmm cross sectional area electric cable for 15/16 Amps socket outlet point controlled by one switch on independent board complete all as specified and directed.
M & L for Point wiring in repairs with PVC insulated unsheathed electric cable 1100 volts grade, single core, having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in existing concealed conduit with 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to earth dolly by providing suitable lugs complete including MS boxes for mounting switches sockets etc complete all as specified and directed. for the following. Make of Cable : Polycab / Havells / Finolex and Make of PVC conduit : Plaza / Harsh / Kalinga / AKG :-
One light / fan point controlled by one switch.
One bell point controlled by one bell Push
One 5 Amps socket outlet point controlled by one switch on same board with other switch.
One 5 Amps socket outlet point controlled by one switch on independent board.
~Ditto~ all as per item No. 108.00 but with 2.5 Sqmm nominal cross sectional area electric cable for 15/16 Amps socket outlet point controlled by one switch on independent board complete all as specified and directed.
Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.
Supply and fixing switch in repair piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.
Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.
Supply and fixing in repair socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.
Supply and fixing switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and directed.
Supply and fixing switch in repair piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and directed.
Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.
Supply and fixing socket outlet in repair flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.
Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.
Supply and fixing in repair bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.
Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.
Supply and fixing in repair Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.
Supply and fixing batten/angular fittings complete all as specified and directed.
Supply and fixing in repair batten/angular fittings complete all as specified and directed.
Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.
Supply & fixing in repair for electronic Fan regulator 450 watt step type complete all as specified and directed.
Supply and fixing Bell, AC 240 Volts,single pole complete all as specified and directed.
Supply and fixing in repair Bell , AC 240 Volts,single pole complete all as specified and directed.
Supply and fixing in repair Bell multi music type AC 240 Volts,single pole complete all as specified and directed.
Supply and fixing in repair white finished single mounting modular plates with inner & outer cover suitable for housing modular accessories of following sizes complete all as specified and directed :-
Suitable for one module
Suitable for 2 modules
Suitable for 3 modules
Suitable for 4 modules
Suitable for 6 modules
Suitable for 8 horizontal modules
Supply and fixing in repair modular Switch 6 Amps single pole, one way complete all as specified and directed .
Supply and fixing in repair Modular Socket outlet, multi purpose, 5 Pin 6 Amps flush type complete all as specified and directed .
Supply and fixing in repair Modular Bell push flush type,6 Amps fixed complete all as specified and directed .
Supply and fixing in repair Modular Socket outlet, multi purpose, 6 pin 16 Amps universal socket complete all as specified and directed .
Supply and fixing in repair Modular Switch 16 Amps single pole, one way complete all as specified and directed .
Supply and fixing in repair modular fan regulator 450 Watt of four step type complete all as specified and directed .
Supply and fixing in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of following sizes:-
350 x 300 x 50 mm size
250 x 200 x 50 mm size
200 x 150 x 50 mm size
175 x 100 x 50 mm size
100 x 100 x 50 mm size
Supply and fixing in repair Cast Iron / pressed steel terminal rectangular sunken boxes 60 mm deep for mounting, switches, sockets, fan regulator, etc with 3mm thick plastic laminated sheet cover of following sizes complete all as specified and directed:-
250 x 300 x 50 mm size
200 x 250 x 50 mm size
200 x 150 x 50 mm size
150 x 150 x 50 mm size
100 x 100 x 50 mm size
Supply and fixing in repair plastic laminated bakelite sheet cover of Hylam brand 2.8 mm thick including cutting holes for switches, sockets etc as pre requirement including fixing with machine screws and washer of following sizes complete all as specified and directed :-
250 x 300 mm size
200 x 250 mm size
200 x 150 mm size
150 x 100 mm size
100 x 100 mm size
Supply and fixing double door TPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed.
Supply and fixing double door SPN DBs 8 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed.
Supply and fixing double door SPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed.
Supply and fixing with MCB SPN 5 to 32 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed.
Supply and fixing MCB SPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed.
Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed.
Supply and fixing MCB TPN 50 to 63 Amps, 10 KA, C-Series including connection with suitable size aluminium / copper lugs complete all as specified and directed.
Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make : Havells Cat Part No. REGALBATTENT8UPTO1X22WDSBS WH or equivalent model of Bajaj / Philips / CG.
supply and fixing in repair LED tube rod 18/20 watt 230 volt T8 type complete with electric electronic driver and bipin holder including one No tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make : Havells Cat Part No. CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent of Bajaj / Philips / Wipro / CG.
Supply and fixing in repair LED batten tube light fitting 1x 9 watt 230 volt wall/ ceiling mounted luminaire with polycarbonate hoiusing and integrated electronic driver with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make : Havells Cat Part No. LUMILINEBS9WLED865SPCWH or equivalent of Bajaj / Philips / CG.
Supply and fixing in repair Wall light fixture lantern made up of polycarbonate ; suitable for LED 9 watt ,compleate with LED 9 watt lamp, spiral B-22 base including connection with all necessary accessories complete all as specified and directed. MAKE : Havells Cat Part No. LHDLO2160099 or equivalent of Bajaj / Philips.
Supply and fixing in repair LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make : Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG.
Supply and fixing in repair plasic body air fan / ventilator with louver 250 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed.
Supply and fixing in repair wall fan of single phase 230/240V of size 400 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed .
M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.
~Ditto~ all as per item No. 53.00 above but with two single core 4.0 sqmm size with 2.5 sqmm cable as earth conductor complete.
M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces complete all as specified and directed.
M&L for Rigid non metallic PVC casing caping ISI marked, medium grade,not less than 25 mm base size inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles hooks,couples and lock outs etc fixed on surface mounted complete and making good disturbed surfaces complete all as specified and directed.
Supply & fixing in repair Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts complete all as specified and directed.
Supply and fixing recessed mounting fitting 1 x 42 watt ultra modern design architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 42 watt lamp incl all accessories complete all as specified and as directed. Make : Havells /Philips / Bajaj.
Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.
RC GUPTA AND SONS
PAPPU ROY CONSTRUCTION
MS BIJAY KUMAR AND SONS
jaglalchoudharyandsons
HARINANDAN RAI SONS
M/s KUMAR ENTERPRISES
M/S Harsh Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .