REPAIR / RESURFACING OF INTERANL ROADS INCLUDING ROAD SIDE FURNITURE IN OTM AND MARRIED ACCN UNDER THE AOR UNDER GE HISAR

Amount

Repair to pot holes of any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L applying evenly a priming tack coat @ 10 kgs per 10 Sqm with paving bitumen VG-10 complete all as specified and directed.

M&L for Preparation of black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air compressor to remove loose dirt etc and applying evenly priming tack coat with bituminous primer VG-10 grade @ 5 Kg per 10 Sqm complete all as specified and directed.

M&L for bituminous premix semi dense asphaltic concrete design mix 30mm consolidate thickness with 5.5% binder content paving bitumen VG-30 by weight of total mix and stone dust using as filler material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed.

M&L premix bitumen macadam with binder content 4% of bitumen (paving bitumen VG -30 grade) by the weight of total mix laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 8 to 12 tonne power roller complete all as specified and directed. Notes for item No 4 & 5 :- (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (ii) Filler for semi dense asphaltic concrete shall be stone dust @ 2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ ₹ 36.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said items. (iv) Work shall be executed as per design mix approved by GE.

M&L for previously treated concrete surfaces of any description not otherwise described, exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

S&F ABS Speed Breaker / Rubber Rumbler of height 50mm and width 380mm in two colour of length 500mm each fixed alternately with reflectors on either side complete fixed with epoxy and bolts by drilling 6mm x 75mm dia fastener as per manufacture instruction complete all as specified and directed. Make : Oscar Model No OS-794 or equivalent of Dark Eye / Avery dennison / Alexis / Sharp Eyez / 3M / TATA.

M&L for preparation of new / old surfaces providing and making lines, dashes, arrows, letters etc on road with hot applied thermoplastic road marking paint min 2.50 mm thick complete in all respects such as furnishing all labour, material, tool, Equipment incl all incidental cost necessary to carryout the work at site conforming to technical specification clause no.803 of MORTH specifications 4th Revision of 2001/Latest edition complete all as specified and directed.

S&F in repair cat eyes two way reflective panel amber or Red, Aluminium body size 100 x 100 x 20mm to give the maximum reflection which enhance the visibility of the vehicles during dark and bad light conditions complete all as specified and directed. Make : OSCAR OS-785 or equivalent in makes Dark Eye/ Trafitronics.

S&F in repairs solar powered road studs of self illuminating flushing type having 3 Nos LEDs for bi directional studs, visibility minimum 1000 meters flashing rate 65-75 times per minute made of robust aluminium die cast housing with emobssed edge for protection against iron wheel, stud capable of withstanding load of fully loaded carriers on the road, having projection of 20mm maximum above surface of size 125mm x 125mm x 25mm (Shank 60mm) complete all as specified and directed. Make : Oscar Model No OS-810 or equivalent of Dark eye / Trafitronics / Sharp Eyes / 3M / TATA.

S&F in repair post delineators made of ABS round body fitted with 2 Nos 100mm dia highly reflective reflectors mounted on 65mm dia MS pipe of 1010mm height duly powdered coated anti rust to be installed in PCC 1:2:4 type B-1 block of size 300x300x300mm including excavation of necessary post hole complete all as specified and directed. Make : Oscar Model No : OS 798 or equivalent in makes Dark Eye / Avery dennison / Alexis / Sharp Eyez / 3M / TATA/ Trafitronic.

M/S RAJINDER SINGH