SPECIAL REPAIR TO BLDG NO T 215 PERS LINE AT 4021 FD HOSP BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down chowkhats or frame n exc 1.5 sqm each with shutters (without taking off shutters from the frame) including fittings complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) including fittings complete all as specified and directed.

S&F of powder coated aluminium fabricated work as in shutters/frames for doors, windows/ vents, partition as per manufacturer instructions including necessary jointing cleats, anodised aluminium snap beading, neoprane rubber beading with and including taking out damage portion of aluminium doors, windows or complete door/ window complete all as specified and directed. Note: Rates are including for necessary new fittings for door/window i.e handle, tower bolt, butt hinges, filling of gap between wall by silicon gel etc.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)proof and & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F of factory made 100% solid PVC flush shutter 28 mm thick, made from co-extruded three layer rigid PVC foam sheet (single extruded) with density not less that 600 kg/cbm outer layer (0.8-1 mm) thick should be of rigid pvc with density of not less than 1400 kg/cum manufactured by an ISO 9001-2015 certified company, door should be water proof, termite proof, fire retardant & having good screw holding capacity complete all as specified and directed.

S&F of factory made 30mm thick 100% Solid WPC (Wood polymer Composite) laminated wiremesh door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity, screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being termite/ borer free, water/ moisture proof and fire retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed. Notes: (i) Stainless steel butt hinges and screws shall be included in the quoted rate of item. (ii) Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other fames/ chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.

M&L for providing cement concrete, 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping, bed blocks, lintels, cills, steps, seismic and other similer bands, kerbs and like etc complete all as specified and directed.

M&L for providing cement concrete, 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in hard standing, finished fair and smooth without using extra cement including demolition of existing concrete complete all as specified and directed.

M&L for mild steel framed work such as in grills, gratings, railings, frame work of water tanks and the like conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of 100 mm long stainless steel butt hinges, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 150 mm long stainless steel handles, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 150 mm long stainless steel tower bolts, ISI marked, extruded section and fixed complete all as specified and directed.

S&F of 300 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc; laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 15 to 18 mm thick granite stone slab (any type) (table rubbed and polished) as in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) over and including 15mm thick screed bed in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges bullnosed complete all as specified and directed.

M&L for 20-22 mm thick machine cut kota stone slab flooring of size 900 x 600 mm (4' x 2') over and including 15 mm thick cement screed base in CM 1:6; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for for 20-22 mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar etc; over and including 10 mm thick rendering in CM 1:4; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and making the edges bullnosed including rubbing and mirror polishing complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat finished surfaces complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like; finishing the surfaces even and smooth without using extra cement with and including making the grooves and filling the same with bitumen mastic including demolition of existing concrete complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub base and mass concrete including demolition of existing concrete complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) joint free, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles in walls/ vertical surface of size 350 x 250/ 450 x 300 & 7 mm thick over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for vitrified ceramic light shade coloured tiles 7 to 8 mm thick (square /rectangular) polished, area of each tile exceeding 0.18 but not exceeding 0.36 Sqm as in floors; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joint, hacking for key, scrubbing down with water complete all as specified and directed.

S&F for wire netting of galvanised steel wire 0.71 mm dia of mesh size 12 mm, fixed with tinned tacks of wire staples for fixing at junction of wall, beam and columns prior to plastering complete all as specified and directed.

M&L for 15 mm thick ready mix plaster on brick/ concrete/ stone surfaces, finishing the surfaces even and smooth without using extra cement as per manufacturer's direction complete all as specified and directed. Make :- Ultratech readyplast, JSW Enduroplast, Hiscon Industries

M&L for applying two coats of damp proof coarse (Primeless high build water based elastomeric exterior wall waterproof acrylic coating for exterior surfaces) designed with weather resistant acrylate polymers, UV resistant and good hiding and spreading, developing a strong intercoat adhesion with the substrate therefore no separate primer is required, features such as waterproofing, UV protection, anti algal resistance, crack bridging of elastic films covering hair line cracks, long term protection, colour variants after preparation of surfaces by cleaning the surfaces till it is free from dust, grease and flaking paint, any unstable paint to be removed, using high pressure wash or scraper, whichever is appropriate, algae and fungus on the wall to be removed by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with Crack-X-paste complete as directed by Engr-in-Charge. Note: (i) Application for verticle surface fresh plaster or repainting on old prepared surfaces. (ii) Use it directly from the container. Stir contents well before use. (iii) Brush/ roller apply a self priming coat of it on the vertical wall surface in SSD condition, diluting 1 litre with 100 ml clean potable water. Allow it to dry for 4-6 hours. (iv) Apply a coat of it without dilution as waterproof top coat, either by roller or brush with force coverage at the rate of 3.7- 4.1 Sqm / litre to achieve DFT of 100- 110 microns. Allow it to dry for 4- 6 hours. Lighter shades of white base on the top of dark colours need additional coat for finishing. (v) An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall etc. Allow the coating to full air cure for 7 days.

Complete removal of existing treatment of walls with and including M&L for two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of required shade and colour, applied as per manufacturer's specification complete all as specified and directed. Note: Putty shall be measured and paid for separately under respective item.

M&L for applying a coat of 1.00 mm thick white wall care cement based water proof putty in two layers on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S&F of 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads beading or fixed in aluminium surrounds complete all as specified and directed

S&F in repairs 20 mm dia stainless steel drapery/ curtain rod with fancy brackets/ and holders for hanging and fixed with screws complete all as specified and directed

S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including white plastic seat cover with aluminium hinging device complete all as specified and directed.

S&F in replacement vitreous china WC squatting pan "Orissa Pattern" of size 580 x 440mm white with integral foot rests with and including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. and making good to floor complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity with 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers and fixed complete all as specified and directed.

S&F in repairs vitreous china urinal, full stall type, white (excluding flushing cistern) but including CP waste fitting, PVC waste pipe and CP urinal spreader complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs 100mm dia CP grating complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) floor trap plain, fixed and jointed with solvent cement complete all as specified and direcetd.

S&F in repairs 125/110 mm bore PVC (SWR) gully trap, set and jointing with solvent cement complete all as specified and directed.

S&F in repairs chromium plated shower rose 125 mm size with or without swivel joints, with shower arms any size including fixing to steel pipe or union of 15 mm bore complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, fancy type (Concealed type) with long shank and cup and capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore angle stop valves, cast copper alloy, chromium plated, fancy type with long shank and cup and capstan head, screwed down, screwed for iron pipe or union complete as specified and directed.

S&F in repairs 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (Concealed type) complete all as specified and directed.

S&F in repairs 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (Concealed type) complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs, precast man hole covers etc; and set in CM 1:4 complete all as specified and directed.

Excavating in trenches n exc 1.5 m deep and n exc 1.5 m wide for foundation, manholes, pipes, cable, etc; and getting out in any type of soils complete all as specified and directed.

Demolition and breaking up of 150 mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (uisng 40 mm graded stone aggregate) as concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for 150mm bore RCC drain pipes, NP-2, laid in trenches and jointed complete with collars in cement mortar 1:3 complete all as specified and directed.

M&L for cutting into existing manholes/ septic tanks for connecting new drains, making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 150 mm dia pipe complete all as specified and directed.

Returning, filling in any type of soil including spreading, levelling, watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing excavated material to a distance exc. 500 m but n exc. 1.5 km and depositing where directed at a level n exc 1.5 mtr above starting point all as specified.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls fixed with MS clamps complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of rolled mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, etc. and fixed with self tapping screws complete all as specified and directed

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description, exceeding 10cm width or girth and applying one coat of synthectic enamel paint of approved tint complete all as specified and directed.

M&L of preparation of new or previously untreated wooden surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of semi perforated 12 mm thick micro tegular of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, non-combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphery wall, partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws complete as per manufactrer instructions and as directed.

S&F in repairs 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9 mm thick and all around side faces is covered with decorative lipping in cup board shutter and fixed with wooden frame-work complete alll as specified and directed.

M&L for 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads of cross sectional area exc 13 but n exc 25 sq cm complete all as specified and directed.

S&F in repairs precast cement concrete louvres and jallies, 25 mm thick (measured solid) 1:2:4, type B-0 (usng 12.5 mm graded stone aggregate) and set in CM 1:6 including all mouldings, frame etc. complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc; of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with multi-stranded copper conductor stranded copper conductor 1.5 Sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable, 1100 volts grade in and including medium grade, PVC concealed conduit and conduit accessories of not less than 20 mm dia, concealed in wall/ floor etc, ISI marked with sheel metal mild steel flush box, white cover plate with frame for fixing modular switches, sockets and fan regulators etc. including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

All as per item No 87.00 here-in-before but for one 3 pin socket outlet, 5 Amps on same board complete.

All as per item No. 87.00 here-in-before but for one 3 pin socket outlet, 5 Amps on independent board complete.

All as per item No. 87.00 here-in-before but for point wiring with 4.0 Sqmm FRLS mutistranded copper conductor cable for 5/ 15 Amps, switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

S&F of modular switch piano, one module, single pole, one way, 6 Amps, 240 volt, 50Hz, AC complete all as specified and directed.

S&F of ceiling rose surface bakelite, three terminals, 230 volt AC complete all as specified and directed.

S&F of modular socket outlet, 2 module, multipurpose having provision for 2/3 pin, 5/16 Amp, 230 volt AC complete all as specified and directed.

S&F of lamp holder, PVC/ polycarbonate body with back plate suitable for batten fittings with 9 Watt LED bulb complete all as specified and directed.

Taking down ceiling fan from fan hook after disconnecting and dismantling of ceiling fan parts i.e. down rod, connector, condenser, nuts, bolts, split pins, rubber bush (garari), condenser carrier clip (PVC) in build connector two way complete with and including servicing fans by cleaning, greasing, oiling and inside surface by CTC with sand paper and re-fixing the same in position including testing complete all as specified and directed.

S&F of building security light fitting 35 Watt, made up of pressure die cast aluminium housing with high efficient LED as lighting source and pc over having top opening separate driver compartment with IP-66 protection and impact resistance of IK-07 including suitable galvanized iron light grade pipe brackets of 1 mtr length, bent to shape to obtain required shape including clamps, nuts, bolts, washers etc; and making connection with suitable copper wire of size 23/0.0076 complete all as specified and directed.

S&F of sheet metal earth plug & socket, single pole and neutral with and including 1 no. single pole MCB 20 Amps 240 volts complete all as specified and directed

M&L for replacement of sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 25 mm external diameter and PVC insulated stranded copper conductor of 2.5 sqmm nominal cross section area as earth wire complete all as specified and directed. Note: Two runs of 4.0 sqmm cable, one run of 2.5 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

S&F in repairs LED tube light fitting, surface mounted lumanaires, 1 x 20 W, 240 V, decorative ultra slim round /squar profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps, connector block, etc. complete with all accessories internally prewired and including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs LED light fitting mirror type with high out put diffuser of 2 feet long, 10 watt, 220 Volts AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of energy efficient (BEE) 5-star rating, SP, 240 Volts 25 ltrs capacity Geyser with stainless steel tank and making all necessary PVC hot and cold water pipe connections including connecting up with three core flexible copper conductor cable of suitable size and testing complete all as specified and directed.

S&F in repairs sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 Amps rated bus bar, 12 way, double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 protection including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F of MCB, SPN, 32 Amps, 240 Volts AC supply, C Curve with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F of factory made epoxy powder coated distribution board, TP & N, 4 ways (VTPN MCCB DB) and space for MCCB as incomer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall, suitable for universal mounting and including isolated neutral bar, insulated bus bar assembly, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts complete all as specified and directed.

S&F of MCB, SP, 6 to 32 Amps, 240 Volts AC supply, C Curve with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F in replacement exhaust fan, rust proof steel body, 230 Volts AC, single phase of size 300 mm sweep with blades, frame and louvers and all necessary fittings with and including drilling of hole and repair of disturbed surfaces complete all as specified and directed. Note: Old unserviceable exhaust fan will be deposited at MES store yard.

M&L for earthing complete with galvanised steel plate earth electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of size 4 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 x 40 x 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 15 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. Note:-Compacted/punned thickness shall be measured & paid.

Supplying and laying bricks sub class 'B' bricks of best quality, locally available for cable protection, laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 Sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc; including taking out old unserveciable cable, any type complete all as specified and directed.

S&F repairs 25 mm GI tubing light grade (as per IS -1239) with all fittings as required for passing through cables under floors, along the wall/ pole, etc; complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 76639.00

M/s VIKAS TRADERS (BID ID -3507813)