Different types of work against System strengtheing works in Municipal area including Noida/Mau (AIIB) Scheme 2023-24 (Package No. 748, 749, 750, 751, 752 and 753/CE/SI/AIIB./2023-24) in the area of Vrindavan under jurisdiction of E.E., EUDD- Vrindav

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

(a) Line Material

(b) 11 KV 3x70/3x120/3x185 sqmm XLPE Cable

(c) TF 250 KVA

(d) TF 400 KVA

(e) 11 KV Pin Insulator with GI Pin

(f) 11 KV Polymer Disc with fitting

(g) 11 KV DO Fuse Set

(h) ABC (3x120/1x95/1x16) sq.mm.

(i) ACSR Weasel Conductor

(j) Earthing complete for pole

(k) 11 KV OD Jointing kit 3x70 sq.mm

(l) LT PVC 1x400 sq.mm.

(m) ST Pole 11 MTR Long

(n) G I Wire

Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department.

Ordinary earthing by 11 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor.

Cable Hosting of 11 KV 3x70/3x120/3x185/ sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

Well type earthing of with 60 Fit Deep borring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction/Repairing of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer. All material and labour shall be supplied the contractor.

Construction of masonry/metalic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm olng) 2 nos. 500 Amp, 3 Nos. 300 Amp henely Type Tailess Funse Unit, 3 Nos coper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Making of Heat & shrinkable joints of following sizes and types in 11 KV XLPE cable(Jointing kit will be provided by deptt.)

(i) Outdoor/Indoor end termination Jointing kit for 11 KV 3x185/3x70 sqmm XLPE cable

Laying Stringing & sagging of 3 Phase 3 wire 11 KV New Line on ACSR Wesal/Racoon conductor as per RESPO Specification and direction on E/I. All material exept ACSR wesal/Racoon conductor shall be supplied by the contractor.

Proper laying & commissioning of (3x120/1x95/1x16) XLPE Aerial Bunched Conductor. Only ABC Provided by deptt.

Fixing and laying of LT PVC Cable 1x400 sq.mm as per RESPO Norms Only Pvc cable provided by department.

Laying of 3X70/3x120/3x185 sq.mm 11 KV XLPE cable by manual method as per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

Supply and fixing of copper L-piece for 250 KVA TF (62x225x12 MM) as per RESPO Norms

Supply and fixing of copper L-piece for 400 KVA TF (62x225x12 MM) as per RESPO Norms

Supply and fixing of copper Alluminium Lug for 250 KVA TF (250/400 sqmm) as per RESPO Norms

Supply and fixing of copper Alluminium Lug for 400 KVA TF(400 sqmm) as per RESPO Norms

Supply and fixing of GI Pipe with clamp & Nut bolt as per RESPO Norms

Supply and fixing of LT Tailless Fuse unit 500 Amp as per RESPO Norms

Fabrication, errection & commissioning of 400 KVA T/F on Plinth with all accessories. All material except 400 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Other Mislenious Material.

G.S.T. Extra as per rules.

M/s CHAUHAN ELECTRICALS