REPAIR REPLACEMENT OF BARBED WIRE FENCE CONCERTINA COIL INCLUDING ANGLE IRON POST AND BRICK WORKS AND ALLIED WORKS AT ANAND PARBAT MIL STN UNDER AGE BR II OF GE NORTH DELHI CANTT 10

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground , complete all as specified and directed.

Dismantling of fencing wire mesh, any type, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded in any morter.

Dismentling wrought iron or mild steel work of any description not other wise provided.

Plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc.

Brick work with Fly Ash bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 with water proofing compuund as per manufacture's instruction including fair finishing to top surface as directed by Engineer-in-Charge(water proofing compound will be measured and paid separately ).

Supply only liquid water proofing compound.( Make-Pidilite)

Mild steel angle iron posts and struts, MS flat iron fillet securing chain link fencing confirming to FE-290 E-165 as in fencing including cutting tops for required shape, drilling holes,bolting, notching for wire including all necessary drilling of similar work, complete all as specified and directed.

Supply only Chain link fencing including wires, mesh of size 50x50mm, weight not less than 3.0 Kg/Sqm confirming to IS, type standards rails, straining bolts etc including provision of binding wire, complete all as specified and directed.

Fixing only PVC coated chain link fencing including line wire, any size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F in Repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc.as directed (each line wire to be measured).

Restraining & resecuring existing barbed wire of any type incl making good staples etc any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) complete all as specified.

S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 8 to 10 mm etc.

M&L, preparation of new surface, priming with red oxide / zinc chromate and two coats of synthetic enamel (ordinary tint) painting to steel and iron surface of any description over 10cm in width or girth not otherwise described.

Preparation of new plastered/unplastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old decorated or previously treated wall surfaces, brooming down or steel wire brushing; scrapping down smoke soot moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/ old previously treated wall surfaces with fully Automatic Airless spray technology with max working pressure complete all as specified and directed by Engineer-in-charge..

M&L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 20mm thick with admixture of pigment to match with shade of granite incl 12mm thick rendering in CM 1:3 as backing coat for receiving of granite complete all as specified and directed.

M&L for Matt finish Exteior wall tiles 8 to 10mm thick & not exc 0.18 sqm , colour & shade of tiles as approved by Engr-in-charge,set and jointed in neat cement slurry and pointed in coloured cement to match the surface etc complete all as specified and directed by Engr-in-Charge.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of Acrylic exterior emulsion paint over a coat of acrylic primer complete all as specified and directed by Engineer-in-Charge.

Preparing old decorated/plastered or un-plastered surfaces of walls by scrapping the surfaces and steel wire brushing down smoke soot,mould,mass and efflorescence salts and trading oil and greasy spots etc and applying one coat of Acrylic exterior emulsin paint with fully Automatic Airless spray technology with max working pressure complete all as specified and directed by Engineer-in-charge..

M&L for preperation of new plasterd or unplasterd surface and applying two coats of cement base paint of approved tint over a coat of acrylic primer complete all as specified and as direcred.

Demolition of plain /reinforeced cement concrete for any thickness in any position and of any discription complete all as specified and as diredted

Providing, cement concrete Type B1,1:2:4 (using 20 mm graded aggregate) as in copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L PCC 1:3:6 type C-1 using 40 mm thick stone aggregate as in plinth protection 75 mm thick incl finished even & smooth complete all as specified.

S&F rolled mild steel as in doors or gate of angle of other section with gusset plates,rails, braces, etc coplete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitting(exlusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in subase of floor, complete all as specified and directed.

M&L sand filing under floors or in foundations including watering and consoldation.

M&L for Machine pressed precast concrete interlocking paver block of colour Red/Yellow glossy type any shape and size, as approved by Engr-in-Charge confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 40 mm thick sand cushion with pigment all as specified.

M&L coloured chequerred cement concrete tiles 30 cm x 30 cm x 25 mm thick machine pressed set jointed and pointed with grey cement & pigments in neat cement slurry in floors set in 15mm thick CM(1:6) including filling joints withwhite or colour cement as directed.

M&L demolition of precast concrete articles/Jallies and precast concrete block walling built in cement mortar all as specified and directed.

S&F 18mm thick factory made WPC board of required length and of 2'-2.5' height, comprising of virgin PVC resin of K Value 58-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650 kg/cbm complete all as per direction of Engineer-in-charge, manufacturer's specification and drawing.

S&F WPC frame 75mm x 50mm with having minimum density 780 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant Complete all as per direction of Engineer-in-charge, manufacturer's specification and drawing.

S&Fin repair 450/ 600mm dia concertina coil with razor lade of 0.40 mm thickness (min) and 2.60 mmGI Wire min width 50 rounds of coil extended into 6 mtr of running length and min weight of 8.5 kg per 50 rounds complete all as specified and directed by Engineer-in-charge.