Supply Installation Testing and Commissioning of Fire Protection System For Agriculture College Ella Farms Old Goa

Supply, Fabrication, Erection, Testing, and commissioning of the following sizes of G.I. ERW C class pipes (conforming to IS -1239), Erection Above Ground (including proper iron supports and anchor fastners), and Laying on Underground with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts. Washer, tie bolt supports and clamps, etc., with one coat of red oxide primer and one coat of synthetic enamel paint. 50 mm

Supply, Fabrication, Erection, Testing, and commissioning of the following sizes of G.I. ERW C class pipes (conforming to IS -1239), Erection Above Ground (including proper iron supports and anchor fastners), and Laying on Underground with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts. Washer, tie bolt supports and clamps, etc., with one coat of red oxide primer and one coat of synthetic enamel paint. 80 mm

Supply, Fabrication, Erection, Testing, and commissioning of the following sizes of G.I. ERW C class pipes (conforming to IS -1239), Erection Above Ground (including proper iron supports and anchor fasteners), and Laying Underground with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, Washer, tie bolt, supports, clamps, etc, with one coat of red oxide primer and one coat of synthetic enamel paint. 100mm

Supply, Fabrication, Erection, Testing, and commissioning of the following sizes of G.I. ERW C class pipes (conforming to IS -1239), Erection Above Ground (including proper iron supports and anchor fasteners), and Laying Underground with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts. Washer, tie bolt supports and clamps, etc with one coat of red oxide primer and one coat of synthetic enamel paint. 150 mm

Supply, Fabrication, Erection, Testing, and commissioning of the following sizes of G.I. ERW C class pipes (conforming to IS -1239), Erection Above Ground (including proper iron supports and anchor fastners), and Laying on Underground with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts. Washer, tie bolt supports and clamps, etc., with one coat of red oxide primer and one coat of synthetic enamel paint. 200 mm

Supplying , Installing, Testing and Commissiong of cast iron double flange butterfly valve of size 80 mm dia. Complete . ISI mark. With P.N 1.6.( Make-Zoloto/Audco/Kbl/Leader )

Supplying , Installing, Testing and Commissiong of cast iron double flange butterfly valve of size 100 mm dia. Complete. ISI mark. With P.N 1.6.( Make-Zoloto/Audco/Kbl/Leader )

Supplying , Installing, Testing and Commissiong of cast iron double flange butterfly valve of size 150 mm dia. Complete. ISI mark. With P.N 1.6.( Make-Zoloto/Audco/Kbl/Leader )

Supplying , Installing, Testing and Commissiong of cast iron double flange NRV of size 80 mm dia. Complete. ISI mark. With P.N 1.6. ( Make-Zoloto/Audco/Kbl/Leader )

Supplying , Installing, Testing and Commissiong of cast iron double flange NRV of size 100 mm dia. Complete. ISI mark. With P.N 1.6. ( Make-Zoloto/Audco/Kbl/Leader )

Supplying , Installing, Testing and Commissiong of cast iron double flange NRV of size 150 mm dia. Complete. ISI mark. With P.N 1.6. ( Make-Zoloto/Audco/Kbl/Leader )

Supplying and fixing priming tank HDPE 1000 litres capacity, mounting with all pipework and valves etc.as required complete.

Supply, Installation, Testing, and Commissioning of C.I foot valve, flanged end including rubber gasket, nuts bolts, and washers. 80 mm

Supply, Installation, Testing, and Commissioning of C.I foot valve flanged end including rubber gasket, nuts bolts, and washers. 100 mm

Supply, Installation, Testing, and Commissioning of C.I foot valve, flanged end including rubber gasket, nuts bolts, and washers. 150 mm

Supply, Installation, Testing, and Commissioning of pressure gauge of 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc.

Supply, Installation, Testing, and Commissioning of pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow, etc.

Supply, Installation, Testing and Commissioning of Air Vessel of 300 mm Ø 1.5m in height M.S. tank installed inside pump house

Supply & Applying wrapping sheet on G.I. pipe including 1 coat of primer & 1 coat of anticorrosive paint for pipes laid below ground.

Supply, Installation, Testing, and Commissioning of gun metal / Stainless Steel Single outlet hydrant valve fitted matching flange, nut bolts & gasket

Supply, Installation & Testing of First aid Hose reel conforming to IS 884 completed with 19 mm dia. bore reinforced braided rubber hose of 30 mtrs length fitted with 6.35mm dia. shut off Nozzle, 25 mm dia. ball valve, etc. The hose reel shall be manual 180 deg. swinging type with reel drum hose shall be provided with coupling.

Supply and installation of Hose box made of 18 gauge MS sheet 800mm x 600mm x 250mm with double door with 4mm thick glasses and housing for hose pipe, and branch pipe. and having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding, etc. duly painted in post box red colour. and Rates include suitable size iron brackets and anchor bolts.

Supply and Installation, Testing, and Commissioning of Gun Metal Short Branch Pipe with 20 mm dia nozzle.

Supply, Installation, Testing, and Commissioning of 63 mm dia. RRL Hose 15 mtr length with ISI marked brass male & female coupling (IS:903) bound & rivetted to a hose pipe with copper rivets complete

Supply, Installation, Testing, and commissioning of gun-metal fire brigade connection (suction collecting head / Four Way) consisting of 4 Nos. 63 mm dia. instantaneous type male couplings with built-in check valves, and 150 mm dia.

Supply, Installation, Testing, and commissioning of gun-metal fire brigade connection (suction collecting head / Two-way) consisting of 2 Nos. 63 mm dia. instantaneous type male couplings with built-in check valves, and 150 mm dia.

Supply, Installation, Testing and commissioning of gun-metal Air release valve 25 mm dia.

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Directional and Fire Safety signages shall be RED with Graphic symbol in White colour and the colour of the Emergency escape signages shall be Green with Graphic symbol in WHITE colour as per IS 9457:2005. STAIRCASE IDENTIFICATION (Size- 100 x 300 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Directional and Fire Safety signages shall be RED with Graphic symbol in White colour and the colour of the Emergency escape signages shall be Green with Graphic symbol in WHITE colour as per IS 9457:2005. EXIT (Size- 100 x 300 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Directional and Fire Safety signages shall be RED with Graphic symbol in White colour and the colour of the Emergency escape signages shall be Green with Graphic symbol in WHITE colour as per IS 9457:2005. ASSEMBLY POINT (Size- 600 x 600 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Directional and Fire Safety signages shall be RED with Graphic symbol in White colour and the colour of the Emergency escape signages shall be Green with Graphic symbol in WHITE colour as per IS 9457:2005. FIRE EXTINGUISHER (Size- 200 x 250 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Directional and Fire Safety signages shall be RED with Graphic symbol in White colour and the colour of the Emergency escape signages shall be Green with Graphic symbol in WHITE colour as per IS 9457:2005. HOSE REEL HOSE (Size- 200 x 250 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Directional and Fire Safety signages shall be RED with Graphic symbol in White colour and the colour of the Emergency escape signages shall be Green with Graphic symbol in WHITE colour as per IS 9457:2005 FIRE PANEL (Size- 100 x 300 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Directional and Fire Safety signages shall be RED with Graphic symbol in White colour and the colour of the Emergency escape signages shall be Green with Graphic symbol in WHITE colour as per IS 9457:2005. MCP (Size- 200 x 250 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Directional and Fire Safety signages shall be RED with Graphic symbol in White colour and the colour of the Emergency escape signages shall be Green with Graphic symbol in WHITE colour as per IS 9457:2005. DANGER (Size- 200 x 250 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Signages will be Blue with Graphic symbol in WHITE colour as per IS 9457:2005. Ramp (Size- 200 x 200 mm).

Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). The colour of the Signages will be Blue with Graphic symbol in WHITE colour as per IS 9457:2005. Lift (Size- 200 x 200 mm).

Supply, Installation, perfect aligning, and proper leveling and testing and Commissioning of centrifugal pump set, electric driven complete with all accessories suitable for pumping water 2400 LPM discharge at 72 m head coupled with suitable size of electric motor AC 3 phase, 50Hz including supply and fixing the items, such as, necessary connection from starter to motor terminal using proper size of copper cable including, connection of suction pipe from pump to foot valve, delivery pipe connected to the raising mains of the over head reservoir by means of suitable joints painting the suction and delivery pipe with super enamel paint over a coat of primer as per standard code of color including MS base plate complete complete all as specified and directed. Rates including RCC foundation and the foundation size should be as per standard/manufacturer recommended (70-75 Hp Main pump Hydrant)

Supply, Installation, perfect aligning, and proper leveling and testing and Commissioning of centrifugal pump set, electric driven complete with all accessories suitable for pumping water 240 LPM discharge at 72 m head coupled with suitable size of electric motor AC 3 phase, 50Hz including supply and fixing the items, such as, necessary connection from starter to motor terminal using proper size of copper cable including, connection of suction pipe from pump to foot valve, delivery pipe connected to the raising mains of the over head reservoir by means of suitable joints painting the suction and delivery pipe with super enamel paint over a coat of primer as per standard code of color including MS base plate complete complete all as specified and directed. Rates including RCC foundation and the foundation size should be as per standard/ manufacturer recommended (10 HP Jockey pump)

Supplying installation Testing and commissioning of a diesel engine-driven main fire pump suitable for automatic operation and consisting of the following: Horizontal type multistage centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg/sq.cm. at the highest and farthest outlet at specified flow of 2400LPM at 72 Mtr head conforming to IS 1520. Suitable HP, water cooled with radiator diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, Suitable electric starting equipment Diesel Tank exhaust pipe extended by 1 m. outside pump house with 50mm thick glass wool with proper aluminum sheet insulation cladding residential silencer instruments protection as per specification. M.S. Fabricated common base plate, coupling, foundation bolts along with Suitable anti-vibration pads. (70 Hp - 75 Hp Diesel Pump)

Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, of 1620 LPM (Litres/min.) at 50 m head centrifugal type single stage pump, 45 HP, (32kW).Rates including RCC foundation and the foundation size should be as per standard. ( Make - KBL/Crompton/Grundfos/Mather)

Supplying installing, testing, commissioning of Jockey Pump of 180 LPM at 50 m head, 3 ph. 440 A.C. 10 HP, (11 Kw).Rates including RCC foundation and the foundation size should be as per standard.( Make - KBL/Crompton/Grundfos/Mather)

Supplying and installing, testing, perfect aligning and proper levelling and commissioning of Diesel operated fire service stand by pump, of 1620 LPM, at 60m head centrifugal type single stage pump, 55HP including all accessories like 200 lit fuel tank, 12 Volts 21Ah battery, exhaust pipe of 3M length with silencer, suitable foundation as per IS Specification & Engineers Instruction etc complete.Rates including RCC foundation and the foundation size should be as per standard. ( Make - KBL/Greaves cotton/Mahindra)

Supply of 3 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 Core 70 sq.mm

Supply of 3 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 Core 16 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(9) 3 x 70 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(5) 3 x 16 Sq. mm.

Supply of 3 1/2 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 1/2 Core 150 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 1/2 Core 95 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(7) 3 1/2 x 150 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(5) 3 1/2 x 95 Sq. mm.

12 core x1.5 sq mm Copper cable for Diesel Engine pump

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Inchargesand cushioning with screened sand bed of 20mm thick protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.;(a) In soily strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Inchargesand cushioning with screened sand bed of 20mm thick protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable)and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.;(a) In soily strata

Supplying and Installing following size perforated type 16 SWG M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish in convenient sections joined with connectors suspended from the ceiling with suitable MS suspenders including bolts and nuts painting suspenders etc complete as required.;150mm width x 50mm depth

Supplying and Installing following size perforated type 16 SWG M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish in convenient sections joined with connectors suspended from the ceiling with suitable MS suspenders including bolts and nuts painting suspenders etc complete as required.;100mm width x 50mm depth

Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe 20mm Class B with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).;(a) In soily strata

Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required);(d) 4 way with 100A MCCB as Incomer double door Cat B

Providing and fixing following rating and breaking capacity adjustible 4 pole MCCB inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc as required;(c) 160 A Adjustable 35/40 KA CAT B

Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.

Supplying, installing, testing, and commissioning of addressable Manual Call Point with back box.

Supplying, installing, testing and commissioning of addressable Sounder with strobe light

Supplying, installing, testing and commissioning of addressable Smoke detector with base

Supplying, installing, testing and commissioning of addressable Heat detector with base

Supplying, installing, testing and commissioning of addressable fault isolator module

Supplying, installing, testing, and commissioning of an intelligent addressable long-range beam detector. The transmitter and receiver typically mount on the ceiling or high beam on walls or columns Beam detector for distances up to 80. IP65 for use of outdoors or indoor with extreme environmental conditions along with control module and 24V DC power supply, including Junction box, cables glands, screw, ravel plugs its. Approved with 3 3-year equipment replacement warranty

Supply, Installation, Testing & Commissioning of 2 Loop programmable Fire Alarm Control panel with battery charger, 48 hours battery back-up and related accessories

Supply of 2 core armoured PVC/XLPE insulated PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;2 Core 1.5 sq.mm

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity, conforming to IS 2878 Complete with, necessary clamp made front 50mm x 6mm. M.S. flat with nut & bolts grouted in wall complete

Supplying and erecting ABC powder fire extinguisher as per IS: 13849 of 6 kg capacity with necessary clamp for erection on the wall.

Supply, installation, testing & commissioning of Automatic Fire Suppression system for Server Room along with all the accessories such as Suppression Agent Cylinder, Solenoid Valves, Pressure Switch, Detection Panel etc. ( Make-Intime/Safex)

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading danger lighting guarding as directed in :;All kinds of soil;All types of Ordinary rock including all types of laterite rock blasting prohibited

Refilling the pipeline/foundation trenches plinth sides foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 75 kgs/ cm2 (wire cut bricks);In foundation and plinth.

Core Cutting for Pipe Fixing 100 mm Dia.

Supply, Installation, testing and Commissioning of LPG Gas Detection System with Buzzer cum Flasher for a power rating of 230 VAC adaptor with a range of 0-100% LEL as per Standard Code.

Supply, Installation, testing and commissioning of LPG Gas manifold for 4 Cylinder (2 + 2 setup) along with accessories like pressure regulator, control valve, pressure gauge, flash back arrestor, etc as per requirement.