Replacement of Water supply mains from pump D and distribution pipe line of type-IV Qtrs (Red bldg. area) at Armapur Estate, Kanpur

Amount

Rough excavation not exceeding 1.5 m deep and getting out in soft /loose soil.

Rough excavation not exceeding 1.5 m deep and getting out in mud soil.

Labour for returning, filling in of Soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M/L for Brick work with sub class 'B' bricks straight or curved on plan exc. 6 M mean radius in half brick thick wall built in 1:4 ratio of cement mortar .

M & L for plastering 15 mm thick in 1:4 cement mortar on wall, floor or drain and finishing the surface even and smooth without using extra cement.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) Un-reinforced cement concrete.

M&L for Cement concrete Type D2 1:4:8 (40.0 mm graded aggregate) in foundations,filling and mass concrete.

M&L for PCC 1:1.5:3, 20 mm graded aggregate for patch work on road etc. and make the surface even.

M&L for Pre-cast cement concrete block masonry of Type B1 1:2:4 (20.0 mm graded aggregate)with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete.

Cutting, pluging & jointing in existing 150 mm bore C.I. pipe for alteration or insertion of new tees, elbow etc.

S&F and laying, jointing and testing of Spigot socket centrifugally casted ductile iron double chamber class K-9 200 mm (8”) dia pressure pipes conforming to IS-8329:2000 or latest, with restrained joints (bolt less) all complete laid in trenches including jointing material (EPDM washer) and accessories complete. Make:- Electrotherm, Electrosteel, Jindal, Tata metallinks, Jai balaji, V-Ducktpipe or substantialy equivalent and as directed by EIC.

S&F and laying,jointing and testing of Spigot socket centrifugally cast ductile iron double chamber class K-9 150 mm (6”) dia pressure pipes conforming to IS-8329:2000 or latest, with restrained joints (bolt less) all complete laid in trenches including jointing material and accessories complete. Make:- Electrotherm, Electrosteel, Jindal, Tata metallinks, Jai balaji, V-Ducktpipe or substantialy equivalent and as directed by EIC.

M&L for D.I specials of Class-K-12 suitable for push on joints as per IS:9523 up to 600 mm nominal bore/Connecting CI/DI fittings one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth or as per site requirement.

supply of 80.0 mm bore pipe rubber or fibre board gaskets for flanged joints.

supply of 100.0 mm bore pipe rubber or fibre board gaskets for flanged joints.

supply of 150.0 mm bore pipe rubber or fibre board gaskets for flanged joints.

supply of 200.0 mm bore pipe rubber or fibre board gaskets for flanged joints.

Mild steel screw bolts neck dia 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long.

Cutting, pluging & jointig in existing 200 mm dia CI/DI pipe for alteration or insertion of new tees, elbow etc.

Cutting, pluging & jointing in existing 150 mm dia CI/DI pipe for alteration or insertion of new tees, elbow etc.

Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20/25 mm.

S&F of clamps of 5 mm thick and 80 mm wide flat iron, fitting on 150 mm CI/DI pipe for fixing of 25 mm dia GI pipe including bolts & nuts, gasket and necessary fittings, complete in all respect.

S&F of C I flange type Sluice Valve 80 mm (3"), Class PN 1.6 (Make- Kirloskar, L&T, leader, Zoloto) conforming to I S:14846 with gasket, fasteners etc.

S&F of C I flange type Sluice Valve 100 mm (4"), Class PN 1.6 (Make- Kirloskar, L&T, leader, Zoloto) conforming to I S:14846 with gasket, fasteners etc.

S&F of C I flange type Sluice Valve 150 mm(6"), Class PN 1.6 (Make- Kirloskar, L&T, leader, Zoloto) conforming to I S:14846 with gasket, fasteners etc.

S&F of C I flange type Sluice Valve 200 mm(8"), Class PN 1.6 (Make- Kirloskar, L&T, leader, Zoloto) conforming to I S:14846 with gasket, fasteners etc.

S&F of 25.0 mm bore gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.

Labour for taking up or down 20 mm bore G I pipe and connections including cleaning for refixing or removal to store.

Labour for taking up or down 25/32 mm bore G I pipe and connections including cleaning for refixing or removal to store.

Labour for taking up or down 40/50 mm bore G I pipe and connections including cleaning for refixing or removal to store.

Labour for taking up 150 mm bore C I/ G I pipe including all fitting with spigot &socket end and lead joint including burning out and recovering lead.

Labour for taking up 100 mm bore C I/ G I pipe including all fitting with spigot &socket end and lead joint including burning out and recovering lead.

Labour for taking up 80 mm bore C I/ G I pipe including all fitting with spigot & socket end and lead joint including burning out and recovering lead

Screwing existing steel tubing bore 20 mm for alterations or additions (or lengthening screw on pipe to form connector)

S&F of Tubes, bore 20 mm 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. Make:- Tata, Jindal, prakash-surya, shakti, fortune.

S&F of Tubes, bore 25 mm 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. Make:- Tata, Jindal, prakash-surya, shakti, fortune.

Shifting of debris upto 5 KM distance as per direction of EIC.

B.K.Associates (BID ID -850851)