R M of LWSS Gummu Pletch in Tehsil Kasauli District Solan (HP)

Amount

Excavation in foundation and trenches etc , in earth work , lift upto 1 metres stacking the excavated soil not more than 3 metres clear fro the edge of excavation and then returning the stacked soll in 15 cm layers , when required into plinths , sides of foundation str consolidating each deposited layers by ramming and water and the disposing of all surplus excavated earth as directed within all lead and lift in PW:JW (50:50) including carriage of materials with all leads and lifts.

Providing and laying cement concrete work 1:4:8 (1cement:4 sand:8 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in foundation and plinth i/c carriage of materials with in all leads and lifts.

Providing form work of ordinary timber planking so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu-reinforced concrete & plain concrete work in where inclination to horizontal plain does not exceed 30 degree requiring shuttering only on the under side in arches up to 6.00 metre span and the like including carriage of materials within all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, struting and propping etc with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu,reinforced concrete and plain concrete and plain concrete work in walls not exceding 10 mtrs.in thickness and the like including carriage of materials within all leads & lifts.

Providing and laying cement concrete work 1:1:2(Icement:1 sand:2 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footing bases of columns and the like and mass concrete work in I/C carriage of material within all lead and lifts.

Flat surfaces such as slab etc.

In walls (any thickness but not less than 0.10m thickness) partitions and string cough .

Providing and laying reinforced cement concrete work1:1.5:3(Icement:1.5 approved quarry sand:3 approved graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in suspended foors, roots etc including carriage of material with in all leads and lifts.

Providing and placing tor steel reinforcement for RCC work i/c bending,binding and placing in position complete i/c carriage of materials with in all leads and lifts.

P/F M.S Man hole cover with frameand cover along with locking arrengement.

Laying,jointing of GMS pipe following dia (Earth work to be measured and paid for seprately).

For vent pipe, score pipe,inlet and let pipe(80mm dia).

For tank to junction and making junction .(65mm dia).

For connection with D/ System .(50 mm dia).

For connection with D/ System .(40 mm dia).

For connection with D/ System.(32 mm dia).

For connection with D/ System .(25 mm dia).

For connection with D/ System .(20 mm dia).

Making of juction for connnetion i/c cutting, welding union, nipple for old, main storage tank and distribution pipe line (65mm dia).

65X50 mm dia.

65X40 mm dia.

65X32 mm dia.

65X25 mm dia.

65X20 mm dia.

Providing and Fixing CI Sluice Valve (with hand wheels) as per IS : 780 Class up to 300 mm dia (including brass spindle and as per IS 2906 Class-II for dia diameter more than 300 mm complete with nuts bolts rubber insertion etc. ) the tail pieces if required shall be measured and paid for saperately of following dia Bir Make PN 1.6 Complete in all respect. (65mm dia).

Manufacturing supplying and fixing of wheel valve chamber of size 1000X1000X600 mm at MS plate 1.66mm thick with angle of size 35X35X4 mm and also providing extra leth of 150 mm of same anle (as tee in the bottom of the all four legs for embedding in cement concrete and top opening will provide with hings with locking arrangements also providing hole on three side of chamber for crossing on different size of pipes ands as per satisfaction of Engineer -in -Charge.

HANS RAJ CONTARCTOR (BID ID -445639)