Repair/Renovation of N.I.C. Building in DC Office Complex Kathua.

Amount

Providing and fixing aluminum work for doors, windows ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, milted and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge( glazing, paneling and dash fasteners to be paid for separately.) For fixed portion anodized aluminum (anodized transparent or dyed to required shade according to IS : 1868 minimum anodic coating of grade AC 15).

Providing and fixing aluminum work for doors, windows ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, milted and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge ( glazing, paneling and dash fasteners to be paid for separately.) For shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately). Anodized aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade-I, Type-II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass / stainless screws etc. compete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 5.50 mm thickness (weight not less than 13 .. 50 kg I sqm)

Providing and fixing 35mm thick panelled or panelled and glazed shutters of Second class deodar wood for door, windows and clerestory windows including ISI marked black enameled M.S.butt Hinges with necessary screws including Panelling of Particle Board 12mm thick Plain particle board flat pressed, 3 layer (like Novapan, Ecoboard etc)or graded wood particle board (like Bhuttan Board) medium density grade 1, IS : 3087 marked

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked.

Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws.

Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium handles 125 mm ISI marked (anodised anodic coating not less than grade AC10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium sliding door bolts 300 x 16 mm ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing 100 mm brass locks (best make of approved quality)for aluminium doors including necessary cutting and making good etc complete.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo em,possed on the body/plate with double spring mechanism and door weight upto 125kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge with Stainless Steel cover plate minimum 1.25 mm thickness.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying White Cement based Putty of average thickness 2 mm of approved brand & manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Painting with synthetic enamel paint of approved brand & manufacture of required colour to give an even shade. Two or more coats on old work

Providing and fixing PVC low level flushing cistern with manually controlled device (handle level) conforming to IS: 7231 with all fittings and fixtures complete.10 litre capacity-White complete job.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete semi rigid pipe 32 mm dia.

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing W.C. Seat Cover White/Coloured of approved quality

Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931. 15 mm nominal bore complete job.

Providing and fixing Vinyl sheet Flooring of 1.5 mm thick of good quality complete job.

Providing and fixing PVC Panelling including cutting, jointing, fixing etc. All job complete

Providing and fixing curtains including fixing of curtain rods brackets, all complete job.

M/s Gupta Construction Co. Group leader Sahil Gupta

S.K Associates & Engineers

M/S JAI SITA RAM CONSTRUCTION CO.

M/S JAI KUL DEV CONSTRUCTIONS