Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹49.9 LAccepted-AOC D 401 NAUSHEEN TOWER D E CHS LTD OPP KAUSA POLICE CHOWKY KAUSA THANE 400 612 | THANE | THANE | MAHARASHTRA | 400612 | 1 | Accepted-AOC L1 | |
| 2 | 2₹57.2 L+₹7.3 L (14.7%)Rejected-Finance B 17 NICHI NEHRU NAGAR KURLA E MUMBAI 400024 | MUMBAI | MUMBAI | MAHARASHTRA | 400024 | 2 | Rejected-Finance L2 |
Tender Value
₹50.6 L
EMD Value
₹1.0 L
Closing Date
17 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CE And HEAD TSD
TSD, BARC, Trombay
Maintenance works related to Civil and PH works in DAE Convention Centre Building at Anushaktinagar, Mumbai.
2023_BARC_778832_1
BARC/TSD/56/2023-24
Open Tender
Civil Works
Item Rate
365 days
Anushaktinagar
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹1.0 L
12 Feb 2024
1 Nov 2023
21 Nov 2023
1 Nov 2023
17 Nov 2023
1 Nov 2023
Amount
Removing flat back urinals system/ EWC/AIWC carefully along with the cast iron/ceramic/plastic flushing cistern including all its accesseries, items including removing bracket screws & existing C.P. fittings & stacking the same as directed by the Engineer-in-charge
Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead including cost of labour , scaffolding etc. all complete as directed by EIC.
Removing hand wash basin carefully alongwith bottle trap ,stop cock, pillar tap,brackets & PVC connections carefully & stacking the the same as directed in Civil Maint.Stores at TSH/NBH .
Dismantling plain cement concrete manually/by mechanical means carefully without damaging adjucent structures including disposal of debris within 200M lead as per direction of Engineer in charge.
Dismantling brick work in cement mortar carefully without damaging adjucent structures including stacking of materials and disposal of unserviceable materials within 100M lead as per direction of EIC.
Dismantling brick bat coba cement based water proofing over roof and chajjas carefully without damaging adjacent structures including lowering and stacking of materials and dispoal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge
Dismantling of RCC works carefully manually without damaging adjucent structures including cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 100M lead as per direction of Engineer in charge.
DISMANTLING DOORS, WINDOWS & CLEAR STOREY WINDOWS (Steel or wood or aluminium) including shutters & chowkhats (frames), Architraves, holdfasts etc. complete and stacking within 100 mts. lead.
of area below 3 sq. m
of area beyond 3 sq. m
DISMANTLING OLD PLASTER OR SKIRTING carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100M lead.
Dismantling C.I pipes of following dia in shafts / open piping including taking out the pipes manually, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge
75 Dia C. I pipe
100 Dia C. I pipe
Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of EIC
Lead charges for lead Exceeding 4 KM not exceeding 5 KM, by mechanical transport including loading,unloading, stacking / levelling etc. etc. as directed by the Engineer-in-charge Note: The rates in respect of this Item is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of Soil and 30% in respect of Debris from corresponding TRUCK Measurement.
Debris beyond 4 Km but up to and including 5 km
Soil beyond 4 Km but up to and including 5 km
Providing CEMENT SAND MORTAR 1:3, screed 20 mm thick, mixed with WATERPROOFING COMPOUND 2% by weight of cement, spread over existing siporex bat coba surface finished smooth, curing, etc. complete for obtaining required slopes. Note : Tentative / suggested make for guidance of bidder(s) : M/s. ACCOPROOF WATERPROOFING COMPOUND or Equivalent make
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces, chajjas etc. consisting of flowing operations : (i) Injecting the top slab as required with cement and approved water proof compound solution to fill up all inherent holes, voids honey combs etc.in the concrete slab, setting "autoclaved aerated light weight block bats" coba in waterproof mortar with necessary gradient for easy flow of water & continue the treatment along the inner faces of parapet or other adjoining wall upto a height of 300 mm in the shape of vatas, finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using river / crushed sand) admixed with proprietary water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including mixing 'polyster fibre of approved make' at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 X 300 mm square, 3 mm deep (v) The whole terrace so finished shall be flooded with water for a minimum period of 2 weeks for curing and for final test. All above operations to be done in order and as directed and as specified by the Engineer-in-charge. 120 mm Average thickness for terraces using river sand / crushed sand
Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used), Note : Scaffolding will be paid seperately under relevant item.
Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge
Second class teak wood
Labour charges only for retriving wooden door shutters from frames (Chowkhat) of various sizes ,modifying,taking out damaged ply from the doors, replacing/bonding 3mm thick marine ply with suitable synthetic resin ( payment for 3mm thick ply only shall be paid under relevent item of the schedule), including cost of fevicol, synthetic resin, tools, tackles, nails, screws etc. all complete and refixing the same after complete repairs,re-sizing & refixing fittings,fixtures such as tower bolts,aldrop, door handle ,baby latch, mortice locks, night latch,hinges etc.( shall be paid separately under relivent item of this tender schedule ) etc. all complete for shutters including minor repairs to chowkhats, architraves, etc. as per site conditions and as directed.
Door frames with shutter of sizes up to 3 Sqm.( Single shutter )
Door frames with shutter of sizes above 3 Sqm.( double shutter)
Resizing of existing Aluminium door shutters.1. Existing aluminium framed swing doors shall make floor touch free (to increase bottom clearance) by resizing 2. The job is involved of dismantling existing shutter totally including accessories/fittings; cutting of aluminium section as required; reassembling. 3. Existing damaged/not reusable aluminium sections shall be replaced with new ones and the same will be measured under concerned items. 4. Providing and fixing of m.s. tie rods having suitable nutt/bolts system at both ends of shutter if need. 5. Reshaping and re-fixing of existing board panel/glass sheets as required; 6. Re-erecting and repositioning the shutter as earlier. 7. Re-fixing of all fittings such as pull/push handle; hydraulic door closer; hinges; locking arrangement; tower bolts; 8. Replacing the existing damaged rubber gasket lining and aluminium clips with new ones 9. The contractor shall be provided the sundry materials such as rubber gaskets; screws, ms tie rods, etc and no extra payment will be made for these. 10. If glass panels are broken during handling, the contractor shall replace the same at no extra cost. 11. Measurements: Each shutter a size of 900 mm x 2100 mm will be measured as one job.
Providing and fixing 35 mm thick flush door shutters of approved make conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.
Providing and fixing decorative high pressure 1.5 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed
Providing and fixing 50 X 20 mm wooden moulded beading to using 2nd class teak wood to door and window frames with iron screws, plugs and priming coat on unexposed surface complete
Extra for providing vision panel not exceeding 0.1 SqM in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
With clear float glass panes of 5.00 mm thickness
With frosted glass panes of 5.00 mm thickness
With toughened float glass panes of 5.00 mm thickness
With toughened float glass panes of 6.00 mm thickness
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with necessary fixtures to fix the glass & completly filling the joint with Silicon Sealent etc. complete as per directions of the Engineer-in-charge (Cost of Spacer & beading shall be paid in basic item)
With Double Glass Unit (sound Proof Glass)
Design, fabrication, supply and installation of frameless Façade using clear, toughened float glass of specified thickness for fixed glazing and openable panels (doors) with crystal edge polish for swing doors, hunged on floor spring, , S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimum thickness 25 microns) Aluminium 'C' channels (25 mm X 25 mm X 1.5mm thick) and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent / plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. Note: Shop drawings to be prepared by the contrator as per the site conditions and the same shall be got approved by Engineer in charge before procurement. Note : Tentative / suggested make for guidance of bidder(s) : M/s. DORMA PT range or Equivalent make
Frameless fixed panels using 12mm thick clear toughened float glass including making cut outs, finishing the edges sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings shall be paid under relevant Item)
Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate
Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.
Repairing and refixing in position the existing damaged hydraulic door closer (heavy duty No.3) involving following operations: I) Complete dismantling including removal of clamp bolt, main arm, top nut, ratchet, notch plate, removal of split oil, brass regulatory screws, spring etc. ii) Providing and fixing approved make ( Confirming to I.S.35640) bottle type door closer spring for heavy duty door closer No.3 brass regulatory spring No.1, Part No.1 machine oil (approx. 100 ml.) etc. Notes.:- 1) The door closer repaired and spares replaced are to be handed over to Maintenance Unit for accounts. 2) The Agency may inspect the condition of door closers in premises prior to quoting. 3) The repairing and spares replacement shall stand for guarantee of six months trouble free operation with replacement of spares if any, defect occurs the same shall be attended by the Contractor.
Providing and fixing mortise lock KEY in outer side and in inside with a pair of lever SS 316 Grade Mortise Lock, Mortise handle, Pin cylinder Lock of approved make all as per specifications and drawings complete. Sample to be approved by the EIC.
Providing and fixing mortice latch and lock of approved make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.
Only repairing of lock of mortise / Knight / Neki or alumunim door lock , including removal & refixing of locks with proper as per existing.
Providing and fixing stainless steel tower bolts of size 250 X 12 mm of approved make with necessary screws etc.all as per specifications and as per drawings.
Providing and fixing anodized aluminium tower bolts of size 200 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.
Providing and fixing stainless steel aldrops of size 300 X 14 mm of approved make with necessary screws, bolting from rear side complete as per specifications complete.
Providing and fixing aluminium aldrops of size 250 X 16 mm ISI marked anodised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge
Providing and fixing pair of stainless steel "C" type door handles 10 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.
Providing and fixing ALUMINIUM HANDLES 175mm LONG INNER GRIP 125mm WITH 12mm DIA ROD PLATE TYPE BOW HANDLES ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.
Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.
Repairing of existing false ceiling to proper levels by providing, supplying and fixing supports by means of 4 mm G.I. Rod from slab / Roof / Truss / Purlins, etc. to false ceiling main TEE supports. The suspension shall be provided at 1200 mm centre to centre. including extra supports wherever necessary, removing and refixing of existing falseceiling boards / tiles / sheets and falseceiling if required. Measurements shall be as per actual area of False ceiling without deductions for lights, complete all as directed by the Engineer Incharge.
Providing and fixing 25 mm S.S curtain rods of 1.25 mm thick with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete
Providing and fixing in position suspended seamless false ceiling system using 12.50 mm thick moisture resistant plain gypsum board suspended ceiling, which includes CRP surface ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with CRP surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners. CRP surface ribbed Ceiling section of having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the channel at 457.5mm centres. Single layer of 12.5mm tapered edge (conforming to BS 1230 part 1) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc jointing compound, Gyproc joint paper tape and two coats of drywall top coat. Note : Tentative / suggested make for guidance of bidder(s) : M/s .Saint Gobain make - GYPROC.MR or equivalent make
Providing and fixing aluminium hanging heavy quality floor door stopper of approved make ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.
Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge
Providing and fixing 25 mm thick Colour PVC Integral foam Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)
Providing, supplying and fixing Venetian Roller Blinds of approved make with all accessories and fabricating to required sizes etc. as per approved design and approved fabric complete all as directed by the Engineer-in-charge.
Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Notes : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)
Extra for colour anodizing
Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge
Providing and fixing stainless steel (SS 304 Grade) 255x19 mm adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge
Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters
Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters
Providing and fixing WATER PROOF MARINE PLY of approved make , the rates are exclusive screws, washers etc complete providing and fixing hard wood leaping around board in walls etc. By using 12 mm thick water proof marine ply.
Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.
Providing 15 mm thick Internal plastering in C.M without cement punning 1:4 (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.
Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge
Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with 15-17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.
Using approved black shade
Extra for providing edge moulding to 15 to 17 mm thick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.
Repairing of bibs tap/pillar tap/stop cock etc. by changing with the spindle, new washers etc. as per site requirement & directed by Engineer-In-Charge.
Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete
Providing and fixing 15 mm n.b. C.P Brass open stop cock of Heavy Quality as per specifications and as directed by the Engineer-in-charge
Providing and fixing C.P brass bib cock of heavy quality as per specifications and as directed by the Engineer-in-charge
15 mm dia bib cock
15 mm dia bib cock self closing
Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality as per specifications and as directed by the Engineer-in-charge
Providing and fixing 15 mm C.P brass pillar cock of heavy Quality as per specifications and as directed by the Engineer-in-charge.
Supplying C.P. Brass Foot operated Valve along with Swan neck Pillar Tap and two Nos. PVC connectors of approx. 0.90 m length each, of approved make and approved sample with necessary approved stainless-steel screw complete as per specifications and as directed by the Project Engineer, including transportation charges and delivery at site work, all taxes as applicable
Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved make and weight as specified in the drawings or as directed by the Engineer in charge.
Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge
Providing and fixing brass ball cock of approved make of following sizes with arm rod and Plastic Ball floats complete as per specifications and as directed by EIC.
15mm/20 mm dia.
50 mm dia
Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge
Providing , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with ISI marked C-Class heavy quality pipes of approved make.
15 mm dia G.I pipe
20 mm dia G.I pipe
32 mm dia G.I pipe
40 mm dia G.I pipe
50 mm dia G.I pipe
Removing existing, damaged non workable sanitary pipe fittings/ water supply fitting & replacing with new approved fittings as per site requirement & and as directed by the Engineer-in-charge
32 mm dia flexible PVC ( semi-rigid) waste pipe
40 mm dia flexible PVC (semi-rigid) waste pipe
Flush handles for slimeline of approved make & of required type.
Washers of flushing system for low/ high level flush tank
Providing and fixing 125 mm dia. S.S./ C.I. Nahani trap Jali as directed by the Engineer-in-charge
Providing and fixing wall mixer 3-in-1 system with provision for both telephonic shower and overhead shower, including 115 mm long bend pipe, connecting legs and wall flange (without hand and overhead shower) complete set of approved make& model including removal of old mixersystem and depositing at unit stores etc. as directed by EIC
Replacing inner fittings such as syphon for flushing water for slimeline or champion make & of required type Flush tank
Providing & fixing approved type heavy duty liquid SOAP DISPENSER with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete. Note : Tentative / Suggested make for guidance of bidder(s) - M/s PERK / ESSCO or equivalent make
Providing and fixing stainless steel TOILET PAPER HOLDER recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete.
Providing and fixing C.P brass towel rail/rod of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement/ brackets all as directed by the Engineer-in-charge.
Providing and fixing Indian water closet (Orissa pan) of approved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm
Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x350 mm / 610 mm Aquaseal model of approved make with approved make 32mm C.P flush value with standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge Notes : 1. Only G.I. pipes will be paid under relevant Item. 2. For fixing flush valve 32 mm G.I water line provision to be made which will be paid under relevant Item .
Single half stall Urinal with C.P. brass flush Valve.
Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge
E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.
Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.
Providing and fixing Brass 15 mm C.P auto shut urinal flush cock of approved make and quality as directed by the Engineer-in-charge. Note : Tentative / Suggested make for guidance of bidder(s) - M/s Jaquar - presstomatic series or equivalent make
Providing and fixing 32mm Regular In-wall Flush Valve with Round Flange . Note : Tentative / Suggested make for guidance of bidder(s) - M/s Metropole or equivalent make
Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge
White vitreous China counter top / counter below wash basin size 560 x 410 mm / 560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND Models)
Providing and fixing solid plastic seat of approved make and colour suitable to existing EWC with lid including CP brass / SS bolts, screws etc. for pedestal type W.C. pan complete as per specifications and as directed by the Engineer-in-charge
Providing and fixing heavy quality C.P .brass waste coupling of following dia for wash basin and sink, of approved make, size and quality all as directed complete
C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement.
C.P Brass Waste coupling 38 mm Dia of approved make Half threaded or Full threaded as per requirement.
Providing and fixing 15 mm C.P brass urinal spreader size with 1/2" BSP thread and shapes, weighing not less than 60 gm of approved make and type.
Providing and fixing 15 mm PVC inlet connection suitable for hot and cold water 600 mm long with nuts and washers complete for wash basins/ Urinals etc. with all necessary acessories complete as directed by the Engineer-in-charge
Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge
Providing, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge
Providing and fixing 15 mm C.P brass tube 600 mm long with nuts and washers complete for wash basins / urinals with all necessary acessories complete as directed by the Engineer-in-charge
REPAINTING OF OLD PAINTED SURFACES with two coats of paint with premium plastic emulsion paint to give an even shade over a coat of approved cement primer including preparing the surfaces, including removal of old paint, scraping if any, sand papering, entirely filling with acrylic wall putty and other cracks with repair mortar as required, including scaffolding & cleaning, cost of all materials, labour, all as per drawing, specifications and as directed by E-I-C. Note : Tentative / Suggested make for guidance of bidder(s) - M/s Roffe - Crack Seal - Repair mortar or equivalent make
Using PLASTIC EMULSION paint On plastered surface
Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.
Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge
Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.
Providing and applying French spirit polishing One coat on old work including preparation of the surfaces, sand papering complete. as per specifications and as directed by the Engineer-in-charge
Providing & Applying SEAMLESS ACRYLIC BASED CHEMICAL WATERPROOFING SYSTEM with minimum 1 mm DFT (Dry Film Thickness) including surface preparation as per general notes, primer coat, reinforcing membrane (minimum 45 GSM) and multiple layers of chemical coat (2 to 3 coats as per manufacture specification), removing the existing damaged water proofing treatment, if any, all complete as per the manufacturers specifications and as directed by Engineer-in-Charge, using Damp Proof all conforming to the following technical specifications or standard to satisfy the site requirements. Chemical properties: (i) Physical/chemical parameters such as specific gravity, solid contents, Tensile strength, viscosity etc. shall be tested as per relevant test method of IS/ASTM/DIN and shall conform to the approved manufactures product and specification. (ii) Elogation: 100% minimum (iii)UV Resistant: Continuous 500 hrs (min) as per ASTM D4587. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Asian Paints - Smartcare Damp Proof of or equivalent make
Over terrace slab, top of water tank and parapet etc. at all levels.
Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding .
Cleaning thoroughly the existing service shafts / behind RCC jalli / gents & ladies toilet at all floors including cleaning throughly the existing cast iron soil and rain water pipes of all wastes, removing rags, loose material, cob webs, cloth pieces , broken concrete pieces and all deleterios materials including lift and lead charges, cost of all tools, tackles, plants, accessories etc. all complete and as directed by the E-in-C.
Cleaning and removal of sewage/drainage wastes, muck etc. from horizontal, inclined & vertical C.I./PVC/lines of all dia. ( burried/exposed) ,secondary traps, Sewage inspection chambers, manhole chamber and all other drainage/ sewage disposal facilities from centralised chambers including all the external sewage / drainage lines of TSH, NBH, HBNI etc. building and its surrounding premises including all the sewage / drainage lines around and inside canteen connecting to centralised collection/ pumpimg sump mechanically/ manually as desired and directed by department including cost of labour,tools,tackles,plants, machines,transportation all complete in all respect and as directed by Engineer in charge. Note. :- Water shall be supplied free of cost & the contractor has to make their own arrangements for the hose, pumps etc. for the flushing of all the chambers, open drains and coonecting sewage / rain water pipe lines to the chambers including trolly for disposal of garbage.
Opening of nahani trap and removing nahani trap jalli and cleaning the complete trap system and refixing the same with white cement etc. and as directed by Engineer in charge.
Opening of bottle trap from its joint and cleaning the complete trap system and refitting,refixing same to sinks,wash basins etc. and as directed by EIC ( Note:- If bottle trap is found in unused condition it will be supplied by department at free of cost).
Cleaning and removal chokages of sewarage wastes,muck,frozen sewage cakes etc. from EWC/IWC/AIWC manually, including cost of labour tools, trooly of sewage muck for disposal of designated place, all complete in all respect and as directed.
Providing and fixing GLAZED VITRIFIED FLOOR TILES in floor and dado of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge
Using Tiles of size 600 X 600 mm
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead complete as directed by the Engineer-in-charge For thickness of tiles above 10 mm and up to 25 mm
Supplying, providing and fixing STAINLESS STEEL-304 D-HANDLES of approved make (MATT FINISH) OF LENGTH - 300mm, DIAMETER-25mm, suitable S.S. fange , S.S. cap and thickness 16 Guage thickness to brick Walls, R.C.C. surface, Wooden doors etc. including drilling, S.S. Screws of 30mm long ( 6 Nos for each handle) ,cost of labour, tools, tackles ,wooden gutties, plants, transportaion, scaffolding etc. all complete as per site requirement and as directed by Engineer in charge.
Providing and fixing CHLORINATED PVC (CPVC) PIPES of approved make having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer.
15 mm outer dia CPVC pipe (External) / open
20 mm outer dia CPVC pipe (External) / open
25 mm outer dia CPVC pipe (External) / open
32 mm outer dia CPVC pipe (External) / open
40 mm outer dia CPVC pipe (External) / open
50 mm outer dia CPVC pipe (External) / open
Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge . Notes : 1. Structural steel confirming to IS 2062 shall be supplied. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D&H or equivalent make of specified suitable grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.
CARRYING OUT MANUAL MISC. CARPENTRY / PLUMBING JOBS like minor repairs, fixing fitting and fixtures etc. as and when required and as directed by the Engineer-in-charge Note: 1. Labours shall bring necessary carpentary / plumbing tools. 2) Payment shall be made as per the Log book duly approved by the Enginner in charge. 3) The log book shall consist of the day-to-day attendance of complaints/ work assigned and the time taken to attend each activity . The total time of 8 hrs. shall be considered as ONE manday. 4) Contrator shall arrange necessary Police Verification Certificate for the workers engaged for the work. General Notes: 1)The contractor shall deploy minimum TWO numbers of skilled labour (one plumber & one carpenter) on daily basis, except only on Republic day, May day, Independence day, sundays but needs to attend any emergency complaint any time of 365/366 days of the year covered during the period of contract Their working hours are 8.30, with a lunch break of half-an-hour,as per the discretion of the Engineer-In-Charge, 2) Penal recovery of Rs. 500 per person per day shall be imposed for their absence. During absence, a similar& suitable person can be replaced by contractor, with the prior permission of EIC. 3)The contractor & his authorised supervisor shall be available on their registered mobiles and respond to calls from Dept. Site Engineer@ 24x7 on all 365/366 days of the contract. 4) The contractor shall submit the samples of all the materials to be used in the work for prior approval of EIC, before carrying out any work.
SKILLED CARPENTER (CARPENTRY WORKS) with valid Police Verification Certificate for entire contract period.
SKILLED PLUMBER (WATER & DRAINAGE WORKS) with valid Police Verification Certificate for entire contract period.
Removing of silt, dry leaves, murrum, small Bolders etc. completely from the bed of open nallah, drains, open rubble pitched drains, canals & disposing the removed earthwithin a lead of 50 mtr during monsoon period.The rates are including removing of green wild creepers etc. silt thickness upto 100 mm thick and upto 3.00 M depth.
230 to 749 mm wide at bottom
750 to 2000 mm wide at bottom
Lead charges for removal of soil deposited from stalling ponds and other areas of BARC by mech.transport for lead or mentioned below incl. loading, unloading , stacking, levelling etc.
Lead exceeding 3 km but not exceeding 4 Kms. Note: The rate forabove item is applicable for the net quantity arrived at after making deductions for voids @ 20% in respect of Soil and @ 30% in respect of Debris from the truck measurement for payment.
Cleaning of existing storm water chamber of varying depth at various locations by removing the silt,leaves, small storms earth etc. earthwithin a lead of 50 mtr during monsoon period including labour required for removing and replacing RCC/ C.I Covers at storm water chamber. (Maximum plan area of upto 1SqM.)
Removing silt, dry leaves, grass etc.completely from the watertable upto 600 mm wide during the entire monsoon period and transporting the removed silt/earth, leaves, grass etc with in a lead of 50 mtr.
Cleaning of dry leaves, dust, silt, scarp materials, vegetation, bushes, fungus, algae, green wildcreepers and like other loose materials such as brick bats, metal etc. from flat/slope roofs, rain water gutter, parapet, chajjas, catwalks and cleaning the rain water down take pipes, water spout pipes at all heights etc. and as directed by the Project Engineer during the entire monsoon period. The rates including cost of polythene bags. The collected debrises shall not be thrown from terrace. The collected debrises shall be kept at one place for further transportation to dumping yard.
Cleaning of Drains during Monsoon period from the bed of drains of flowing water at full bottom width at various locations and depth upto 3 mtr from the Ground level by removing silt, wild vegetation green/ dry, creepers from the sides of drains if any for smooth flow of water including disposing the removed materials within a lead of 50 mtr. & as directed by Project Engineer.
Cleaning of existing storm water Hume Pipe lines of Different Diameters / Pipe culverts mentioned below and at all locations such as road, berms/ lawns, burried inside the building which are partly or fully filled with silt, small boulders, dry leaves, grass, etc. by disposing the removed debris within a lead of 50 mtrs and as directed by the Project Engineer.
Upto 450 mm Dia.
Above 450 mm Dia
Clearing Jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m / outside the periphery of the area cleared as per specifications and as directed by the Engineer-in-charge
Cleaning of manholes /Inspection chambers of Canteen and toilets, sewage line carefully by mechanical means/ or with tools complete all as directed by Engineer-in-charge. Pipe in between chambers will not be measured. The rates are inclusive removing muck, solids and disposing the same beyond 2 km distance. Pumping arrangement for water is to be made by contractor at his own cost. The rates are inclusive pumping.
Labour charges for cleaning of existing gully trap, chambers and stoneware pipes upto Inspection chambers and CI pipes from Nahani trap to gullytrap. The rates are inclusive removing and refixing C.I. cover of chambers.
Meena Enterprises
stage.html
html • 0.04 MB
techsummary_818679.pdf
PDF • 0.16 MB
BOQ Comparative Chart
xlsx • 0.03 MB
finsummary_818679.pdf
PDF • 6.16 MB
WorkOrderContCopy.pdf
PDF • 6.16 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .