Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC NEAR TRUCK UNION ADAMPUR DOABA 144102 | ADAMPUR | JALANDHAR | PUNJAB | 144102 | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.2 L+₹1.6 L (5.62%)Rejected-Finance VILL CHOMON ADAMPUR JALANDHAR PUNJAB 144103 UDYAM PB 10 0011450 | JALANDHAR | PUNJAB | 144103 | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹30.6 L+₹2.0 L (7.11%)Rejected-Finance CHOMO JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L3 | Rejected-Finance Other than lowest. | |
| 4 | L4₹31.1 L+₹2.6 L (8.97%)Rejected-Finance NEAR RAILWAY CROSSING ADAMPUR DOABA JALANDHAR JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L4 | Rejected-Finance Other than lowest. | |
| 5 | L5₹34.9 L+₹6.4 L (22.2%)Rejected-Finance | L5 | Rejected-Finance Other than lowest. |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
8 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer Services AF Stn Adampur 144103
MISC REPAIRS TO BLDGS AND WSA-III IN TECH AREA AT AF STN ADAMPUR
2023_MES_622850_1
GE/AF/ADM-45/2023-24
Open Tender
Civil Works
Item Rate
180 days
Tech area at AF Stn Adampur
Refer NIT and tender Documents
8 documents required · 8 mandatory
₹500
GE AF Adampur
₹60,000
Yes
29 Dec 2023
12 Oct 2023
9 Nov 2023
12 Oct 2023
8 Nov 2023
26 Oct 2023
13 Oct 2023 - 25 Oct 2023
Amount
Excavation in trenches n. exc 1.5 m wide for foundation, laying of pipes, drain, trenches etc. getting out in soft/ loose soil by manually not exceeding 1.50 metre deep and getting out complete, all as specified.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in SOFT/LOOSE soil complete, all as specified.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, complete, all as specified.
Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.
PCC type B-2 (1:2:4), using 40 mm graded stone aggregates as in foundation filling & mass concrete, complete all as specified.
Cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in surface channel, coping to drain complete all as specified.
PCC type C-2 (1:3:6), using 40 mm graded stone aggregates as in filling & mass concrete to securing chain link fencng from bottom side, complete all as specified.
PCC type C-2 (1:3:6), using 40 mm graded stone aggregates as in surface channels & drains etc. complete all as specified.
PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in foundation filling & mass concrete, complete all as specified.
Supply only water proofing compound, ISI marked, complete all as specified.
Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.
Brick work using old size bricks (EXCEPT BRICKS), straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified.
Mild steel works in hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) in-cluding all necessary drilling, bolting or riveting, etc., confirming to Fe-290-Gde E-165, complete all as specified.
Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified.
Fixing only chain link fencing including line wire mesh, any mesh, size and type to any types of standards rails, straining bolts, mild steel round bars etc. including provision of binding wire complete, all as specified.
Supply only chain link mild steel galvanised hot dipped fencing (mesh size not more than 50mm x 50mm of 10 gauge wire and weight exc. 3.00 kg/Sq.m) complete all as specified. NOTE:- The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made acoordingly.
Supply only Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exceeding 10 cm long, dia of neck 5 to 10 mm, complete all as specified.
Supply only Mild steel round bars 10mm dia and over, cut to length, bent to shape required, for chain link fencing complete, all as specified.
Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed, IN REPAIRS, (each line wire to be measured) complete all as specified.
Restraining and resecuring including making good staples etc. only steel barbed wire to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified.
Concertina coil with punched tape 600 mm dia with high tensile galvanised wire having diametre not less than 2.5 mm and blade size 15 mm x 12 mm x 0.5 mm, spacing of blade not more than 26 mm, fixed in position over walls etc. IN REPAIRS, complete.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/ cladding to wall, fixed with self tapping screws comlete all as specified.
Pre-painted galvalume aluminium zinc coating GI based corrugated (EXCEPT SHEET) steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/ cladding to wall, fixed with self tapping screws comlete all as specified.
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/ cladding to wall, fixed with self tapping screws comlete all as specified.
75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified.
75 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with or without water proofing compound as per manufacturers instructions, complete all as specified. NOTE:- WPC measured & paid separately under respective item.
Three coats of white wash on new plastered wall surfaces, including preparation of surfaces, complete all as specified.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer in four shades of disruptive/camouflaging pattern .
NOTE FOR SERIAL ITEM NO. 29 (i) Entire quantity of material for this work shall be procured by the contractor from manufacturer's Depot & deposit the same with Enginer-in-Charge and same shall be issued to contractor on daily basis as per consumption at site. (ii) The work shall be got executed through paint manufacturer/ authorised applicators of manufacturer's as specified in relevent PS clause. (iii) RGB value of four shades of disruptive/camouflaging pattern shall be all as shown on Drg No. GE/SK-1/19 sheet 1/2 & 2/2.
Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.
Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of surfaces complete, all as specified.
Applying one coat (finishing coat) of synthetic enamel paint over old painted steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified.
Two coats of synthetic enamel paint over old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, over a coat of red oxide primer in disruptive/camouflaging pattern of four shades, for height not exceeding 10 metre including complete removal of existing surfaces complete all as specified.
NOTE FOR SERIAL ITEM NO. 33 (i) Entire quantity of material for this work shall be procured by the contractor from manufacturer's Depot & deposit the same with Enginer-in-Charge and same shall be issued to contractor on daily basis as per consumption at site. (ii) RGB value of four shades of disruptive/camouflaging pattern shall be all as shown on Drg No. GE/SK-1/19 sheet 1/2 & 2/2. (ii) The rate quoted by the contractor shall included for scaffolding and necessary formwork.
Cement concrete work 200 mm thick in pavement / hard-standing of flexural strength 45 kg / Sq.cm in field using 400 kg of cement per cubic metre including necessary from work and bull nosing, rounding off edges finish by brooming / belting etc. laid in single layer complete all as specified.
Forming contraction (Dummy) joint 25mm deep x 8mm wide including provision of 10 mm dia polyurethene foam closed cell backup rod and sealed with polyurethene sealent (min depth of sealent 12mm) after priming the vertical surface with approved primer twice @ 0.075 litre (minimum) per square metre complete all as specified.
Forming 8-12 mm wide construction Joints in rigid pavements by using polyurethane joint sealent (minimum depth 13 mm) after priming the vertical surface twice @ 0.075 litre (minimum) approved primer per square metre sealed flush to a level of 2-3 mm below the top of the adjacent pavement and provision of 10 mm dia polyurethene foam closed cell backup rod complete all as specified.
Forming 25mm expansion Joints in rigid pavements by using polyurethane joint sealent (minimum depth 12 mm) after priming the vertical surface twice @ 0.075 litre (minimum) approved primer per square metre and sealed flush to a level of 2-3 mm below the top of the adjacent pavement and provision of 30 mm dia polyurethene foam closed cell backup rod complete all as specified.
Forming embankments including raising (or lowering) earth, spreading in layers n exc 30 cm thick, watering, ramming to obtain optimum moisture condition to the specified percentage of standard proctor density not less than 95 percent and finishing to required size & shape as directed by Engineer-in-Charge for height : -
Not exceeding 1.5 metre high from base
Exceeding 1.5 metre but not exceeding 3 metre high from base
Exceeding 3 metre but not exceeding 4.5 metre high from base
Exceeding 4.5 metre but not exceeding 6 metre high from base
NOTES FOR SERIAL ITEM NO 38 : - (i) Quoted rates shall include the cost of earth / soil to be brought from out side MoD land. (ii) Removing boulders / lumps of size 75mm and above by screening the soil before filling in traverse.
DISMANLING/DEMOLITION WORKS
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified.
Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.
Demolition of (un-reinforced) cement concrete (PQC) of any description and in any position not otherwise specifically provided, with rock breaker or compressor breaker pin complete all as specified. NOTE:- Ulmost care to be taken not to distrub adjacent pavement slab while cutting / dismantling slab.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified.
Dismantling fencing wire mesh, any type complete all as specified.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, embedded with concrete etc. complete all as specified.
NOTE : Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.
M/s Sahib and Company
LABH SINGH AND SONS
M/S GURBACHAN SINGH
PRATHAM TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .