Supply, Installation and Commissioning of LED Street lighting arrangement at Haripur Village under Pandaveswar Block Dist. Paschim Bardhaman

Amount

Supply of Hot dip Galvanized Swaged type Steel Tubular pole of 7.0 mtr long with inbuilt junction box including cut-out, terminal etc. for cable termination, base plate, pole cap & 1.5 mtr long swan neck as per specification IS : 410 SP 3 at work site of make BPP/Utkarsh Tubes and Pipes Ltd./Skipper Steel Ltd./Subham Pole

Erection of Single steel tubular pole in C.C foundation of size 600 mm x 600 x 1500 mm including muffing (cylindrical shape) of size 450 mm x 450 mm above ground level with stone chips including cement plastering & neat finishing with supply of materials & labour

Supply of XLPE armoured cable of 1.1 KV grade to the work site of size 16 mm2 x 4 core of make Polycab/Finolex/KEI

a) Laying of above cable after cutting the trench in all sorts of soil of size 460 mm x 760 mm average depth, with sand & brick protection (08 Nos. brick per meter, width wise) including back filling of shifted soil to restore the surface in original conditions.

b) Laying of above cable through Pipe/Pole etc.

Supply & laying of 50 mm dia, GI pipe (ISI - Medium) for protection of cable, road/drain crossing etc.

Supply & drawing of 1.5 sq.mm PVC single core multistrand copper wire from pole box to fittings through the pole & connection, testing complete of make Polycab / Finolex / KEI.

Finishing of PVC cable end with crimping method including supply & fixing of solderless socket, anti corrosive paste & jointing materials. 4C x 16 sq. mm.

Supply, installation, commissioning & testing of outdoor type feeder pillar box made of 2 mm CRCA sheet duly rust inhibited and stove enamel painting, complete with rubber gasket, hinged door at least 800 x 450 x 200 mm in size projected top cover, suitable ventilation and MS iron frame work with adequate space for provision of WBSEDCL meter. The panel consisting with 63 A TPN incoming, Astronomical time switch, toggle switch, contractor of L&T make for automatic operation of street light system.

a) Earthing with 50 mm dia GI pipe 3.64 mm thick X 3.04 Mtrs long and 1 x 4 SWG GI (Hot Dip) wire (4 Mtrs long), 13 mm x 80 mm long GI nuts bolts with double washer including (Tata-Medium GI pipe) making digging of soil etc. complete.

b) Treatment of soil by using salt and charcoal or coke.

Supply, fixing, connection & testing of outdoor type Street light fittings of IP66, IK05 LED Integral type streetlight luminaire with system lumen > 11500 Max system wattage 90 W with pressure die cast aluminium housing, Luminaire should be operable with auto adjustable 140V-270V supply voltage with same driver and with 3 KVA Surge protection, LM 80 For LED Source & LM79 for Luminaire is mandatory, Confirming the lighting level as per B1 category road of IS 1944 with spacing [Make: Philips (Cat no. BRP 409 LED 115 CW SLC FG PSU GR V2 SPD)/ Approved equivalent from Crompton/Wipro/Bajaj make]

Excavation of soil for installation of Earth Electrode and filling and ramming. For soft soil.

Excavation of soil for installation of Earth Electrode and filling and ramming. For morrum soil.

Extra for treatment of soil by using salt & charcoal or coke for electrode.

Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor/through pipe with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire. a) 4 SWG.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 16 sq. mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying & fixing solderless socket (Dowels make), tapes, anticorrosive paste and jointing materials: 4C x 16 sq. mm cable.

Supply at the work site of 1100 volt grade 1.5 sq. mm FR PVC insulated single core unsheathed multistrand copper cable conforming to IS: 694:1990. (Ph., N & E) from pole box to light fitting as per direction of EIC. Finolex/KEI/ Polycab/ Mescab.

Drawal of 1100 volt grade 1.5 sq. mm FR PVC insulated single core stranded copper wire conforming to IS: 694:1990 (Ph., N & E) from pole box to light fittings as per direction of EIC.

Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make,and brand incl. preparation of surface by sand paper/emerypaper, cleaning etc. for receiving fresh coat of paintUpto 9.0 mtr. long pole , 1st coat of aluminium paint over 1 coat of RO priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint,Upto 9.0 mtr. long pole , 2nd coat of aluminium paint over 1st coat. as given below with ready mixed paint/primer of approved make,and brand incl. preparation of surface by sand paper/emerypaper, cleaning etc. for receiving fresh coat of paint , Upto 9.0 mtr. long pole, 2nd coat of aluminium paint over 1st coat.

M/S JOYA ELECTRICALS

MONISH ENTERPRISE