SPL REP AND REPLACEMENT OF ASBESTOS SHEET WITH GALVANIZED SHEET AND CONNECTED ITEMS OF BLDG NO T63 AND P49 MAIN WKSHOP FLOOR OF ENGR STATIC WKSHOP EME KHADKI AND SPL REP TO SEWAGE LINE IN TECH ACCN AND COOK HOUSE AT MH KHADKI UNDER GE MH AND RH KHADK

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) of any description, any thickness including cover fillets and frame work etc, complete all as specified and directed.

Material and Labour for snap grid ceiling with 19mm thick semi - perforated edge 60x60cm in ceiling board over GI grid prelude XL 24 mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as specified and directed.

Taking down chowkats and frame exc 1.5 Sqm and n.exc 4.0 sqm incl shutter with out taking off shutters from frame and removing from site complete all as specified and directed.

Supply and fixing aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh fittings etc, and necessary locking arrangements and including making good the jambsand painting with matching type and shade complete all as specified and directed. Note:- Making good of all wall surface with matching to existing surface internal and external complete all as specified and directed.

Material and Labour for 20mm thick Granite slab machine cut in jambs, cills, cooking platforms, counter tops and like laid over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

Dismantling of Asbetos sheet (corrugated, semicorrugated) in roof covering etc, complete all as specified and directed.

Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, but length of bolts exc 5cm but n exc 10cm long of Diameter of shank 11 to 15mm complete all as specified and directed.

Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and Labour for preparation of new or untreated old plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over and including a coat of primer over and including 1mm thick wall care putty finished even and smooth complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and 1.50m depth for foundation, etc., for Shaft wells, Manholes etc not exceeding 10sqm on plan and not exceeding 1.50m in depth and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading leveling watering well ramming in layers not exceeding 25cm thick with soil obtained from excavation complete all as specified and directed.

Demolition and breaking up drain pipes of 150 mm bore RCC/SGSW set in cement mortar including removing the debries outside MD land complete all as specified and directed.

All as per item No. 13 above but dia of pipe 200mm complete all as specified and directed.

All as per item No. 13 above but dia of pipe 300mm complete all as specified and directed.

Material and Labour for 150mm dia RCC drain pipes class NP2 laid in trenches and jointed with cement mortar complete all as specified and directed.

All as per item No. 16 above but dia of pipe 200mm complete all as specified and directed.

All as per item No. 16 above but dia of pipe 300mm complete all as specified and directed.

Material and Labour for cutting to existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benchings for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for internal dia of pipe 200 mm complete all as specified and directed.

All as per item No. 16 above but for internal dia of pipe 300mm dia complete all as specified and directed.

Demolition of Brick/PCC solid block masonry built in cement mortar/cement lime mortar including removing the debries to a distance n exc 50m complete all as specified and directed.

Material and Labour for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cm 1:6 complete all as specified and directed.

Material and Labour for reinforced cement concrete type Bo 1:2:4 (12.5 mm graded stone aggregate) Walls, retaining walls for manholes and raft for manholes including complete all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:4 mixed with water proofing compound as per manufacturer's instructions on block walling / concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately.

Demolition of concrete of any description below or above ground and in any position not otherwise specifically provided for complete all as specified and directed.

Material and Labour for Cement concrete type B2 1:2:4 (20mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping and benching of manholes etc., finished even and smooth without using extra cement including neceessary form work complete all as specified and directed.

Material and Labour for PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in foundation complete all as specified and directed.

Extra for fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description as in cover slab etc and similar work,including removing the debries to a distance not exc 50m, complete all as specified and directed.

Separating scraping and cleaning of reinforcement (Demolition of concrete measure separately) complete all as specified and directed.

Material and Labour for 2.5 MT Capacity FRP as in manhole cover slabs with frame size is (900x900/600x600/600x900mm) sizes set in cement mortar 1:3 including necessary formwork complete all as specified and directed.

Material and Labour for Pre-Cast RCC 1:2:4 nominal mix, type B1 using (20mm graded aggregad ) as in cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed. Note :Reinforcement shall be measured and paid separately .

Material and Labour for TMT bars 6 to 8 mm dia bars cut to length, bent to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia confirming to IS, complete all as specified and directed.

Supply and fixing of Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) complete all as specified and directed.

Supply and fixing in repairs 75 mm Cast iron floor trap / Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4, using 20mm graded stone aggregate complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fixing in repair framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe 290 Gde-E-165 complete all as specified and directed.

Material and Labour for cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) for 75 mm thick sub base or similar items complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc complete all as specified and directed.

Supply and fixing Pre Polished Chequered cement concrete tiles glossy and rubburised finish colour 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6 under tiles complete all as specified and directed.

Material and Labour for machine cut kota stone slab flooring 20 to 25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding complete, over and including 15 mm thick screed bed or bedding in CM 1:6 for laying floor finishes, complete all as specified and directed.

Material and Labour for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through non metallic rigid PVC conduit and accessories in surface of walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes to provision of Modular switches to house switch/regulators etc including Modular Plate and Covers for one fan/light /bell point controlled by one switch/bell push complete all as specified and directed. Note :- (i) The work is to be carried out in workshop bldg at a height upto 9 mtrs. (ii) The cost of T&P involved in doing the wiring work is included in the quoted cost. (iii) The contractor has to visit the site and check the site conditions before quoting the tender.

All as per item No 44 above but for one 3 pin 5 Amps socket on same board controll with other switches on same board complete all as specified and directed.

All as per item No 44 above but for one 3 pin 5 Amps socket on independent board complete all as specified and directed.

All as per Item No 44.here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for Power Socket on independent board complete all as specified and directed.

All as per Item No 44.here-in- before but with 4 Sqmm PVC insulated multistranded copper conductor with 4 sqmm cable as earth continuity conductor for Power Socket/AC/Geysers on independent board complete all as specified and directed.

Supply and fixing modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fixing modular bell push 6A 1 module complete all as specified and directed.

Supply and fixing modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing modular socket 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing modular switch 1way 16A 1 module complete all as specified and directed.

Supply and fixing Modular fan regulator complete all as specified and directed.

Supply and fixing electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite with three terminals complete all as specified and directed.

Supply and fixing in repair of LED fitting for Bldg security, 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete. including conncting with 1.5 sq mm copper condector 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary GI bracket made of 32 mm light grade GI pipe of 1 mtr lenth with necessary bending complete all as specified and directed .

Supply and fixing in repair LED lights fitting 1x 22W, 220V,AC, decorative box type with driver, holder incl LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down old unserviceable Tube light fitting of any type and Supply and fixing wall/ceiling mounted LED tube light fitting aluminium body , Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement complete all as specified and directed. Make : Jaquar/Halonix/Philips . Note :- The rates are inclusive of cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc.

Supply and fixing in repair LED Light fitting mirror type with high output diffuser 2 feet , 1 X 10 watt 220 V AC decorative type with driver holder and LED lamp, Alluminium housing, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down old unserviceable fitting and Supply and fixing Recess mounting LED flat panel light fitting of size 600mmX 600mm of wattage 36 watts with efficient LEDs lumen 2000 -3000, PF> 0.9, THD less 15% including taking down unserviceable fitting of any type and make complete all as specified and directed. Make : Havells/wipro/Halonix

Material and Labour for submain wiring in PVC conduit with two runs of 6 sq mm and one runs of 6 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including 25 mm dia PVC rigid connduit heavy grade ISI marked (IS 9537 Part III) includung accessories such as bends, supports etc complete all as specified and directed. Note: Two runs of 4 sq mm and one runs of 4 sqmm cable along with conduit shall be measured as one length.

Supply and fixing MCB DB SPN 8 way of any size and capacity double door type horizontal with 200A busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed.

Supply and fixing MCB SP of capacity 5A - 32A "B' curve complete all as specified and directed.

Supply and fixing MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve complete all as specified and directed.

Taking down unservicable earthing and Material and Labour for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 (20mm graded stone aggregate) RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and complete all as specified and directed. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate.

Supply and fixing in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm ( For Toilet) and depositing old exhaust fan to MES store complete all as specified and directed.

Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and depositing old exhaust fan to MES store complete all as specified and directed.

Supply and fixing in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amp DP MCB complete all as specified and directed..(for Geyser)

Supply and fixing (Geyser) Water heater storage type of capacity 25 Liters vertical type wall mounted including 15/16 Amps plug top with suitable wall supports and for digital operation, digital temperature display, feather touch buttons, built in thermostat, auto shut off, powder coated single line weld container with PUF insulation, heating element capacity of 2 KW, voltage rating 230 Volt, frequency 50 Hz, 5 star rated with and including steel braided connecting hoses of required length for Hot and cold water pipe, connecting to CPVC and GI pipe complete all as specified and directed. Make: Jaquar Cat no MET-WHT-V025 or equivalant in Havells/Crompton/Bajaj. Note :- (i) The rates are inclusive of all the minor spares (Fasteners, Nut bolts washers etc) required for making the geyser fully functional.

Supply and fixing Hot water pillar taps 15 mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing Stop Valves , cast copper alloy, screwed down , high pressure with crutch or butter fly handle , screwed both ends for iron pipe or for unions and fixed of size 15 mm complete all as specified and directed.

Material and Labour for Cutting existing cast iron pipes of 80 mm dia for insertion of new tees, branches etc. including necessary excavation work in any type of soil complete all as specified and directed.

Supply & laying pipe galvanised medium grade of 20 mm dia class including all fitting ( such as bends, elbows, tees required for reduce size as per site requirment, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions, etc) and fixing complete with clips, wall hooks, wooden plug, or laying in trenches or fixed to wall /floor/roof including cutting screwing etc, complete all as specified and directed.

Supply and fixing of gun metal globe or gate valve of size 20mm dia ISI marked with iron wheel head screwed both ends for iron pipes or unions conforming to IS-778 complete with jointing materials like rubber sheet, nuts and bolts complete all as specified and directed.

Material and labour for construction of brick masonry valve chamber of size, 105cm X 105cm x 105cm (internal) suitable for housing sluice valve/gate valve etc with plain cement concrete 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 100mm thick with 150 mm alround offset from external face of wall, brick work in cement motor 1:6, 230 mm thick, rendering 15mm thick in cement motor 1:4, inside complete and outside 150 mm below ground level, coping with plain cement concrete 1:2:4, using 20mm graded stone aggregates, type B-1, including provision of MS sheet cover 3.15 mm thick fixed to MS angle iron frame 40 X 40 X 6 mm embedded in PCC (1:2:4) concrete type B1 (20 mm stone aggregate) with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces including necessary excavation and earth work in any type of soil etc complete all as specified and directed.

V.R.PRAJAPATI AND CO. (BID ID -3327675)

M/S JAYCONSTRUCTION CO (BID ID -3336528)

SAMBHAJI D JARANDE (BID ID -3328209)

S.R.M.K Enterprises (BID ID -3327600)