GE (N) P/TOKEN- 59 OF 2025-2026REPAIR/ MAINT/SERVICING OF ELECTRICAL INTERNAL/EXTERNAL ELECTRIFICATION, WATER SUPPLY, STREET LIGHTS AND SUMMER APPLIANCES AT KOLHAPUR MIL STN UNDER GE (NORTH) PUNE

Amount

Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays etc getting out in soft disintegrated rock, complete all as specified and as directed.

Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays etc getting out in Hard Rock , complete all as specified and as directed.

Excavating in Trenches, exc. 1.50 Metre but not exc. 3.00 Metre in depth, for laying of UG Cable/ foundation of Pole / Stays etc getting out in Hard rock, complete all as specified and as directed.

Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.

Removing Surplus excavated material to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

Dismantling unserviceable Steel Tubular / telephone/ wooden/ Pipe Poles of any description and any size including demolition of Cement Concrete (as/if required) and made good disturbed Ground, complete all as specified and as directed. NOTE : (i) Unserviceable Poles will be dismantled at Ground Level and disturbed ground shall be made good as directed for which Earthwork, demolition of Cement Concrete, etc. will not be measured and paid separately. (ii) Earth work, demolition of cement concrete for taking out serviceable poles will be measured and paid seperately under relevant item

Dismantling Stay Assembly of any description and any size including Mild Steel Clamps with Bolts, Nuts and Washers etc., complete all as specified and as directed. NOTE: Unserviceable Stay Assembly will be dismantled at Ground Level and disturbed ground shall be made good as directed for which Earthwork, demolition of Cement Concrete, etc. will not be measured and paid separately.

Dismantling Cross-Arms of Mild Steel Channel or Angle Sections, etc, including Mild Steel Bolts, Nuts, Washers, etc., complete all as specified and as directed.

Dismantling Insulators like Pin type, Shackle type from existing Electric Poles of any description and any size, seggregating Seviceable Insulators and keep in safe custody for re-use, complete all as specified and as directed.

Dismantling ACSR or AAC Conductors from the Disturbed Span including Line Spacer, etc., complete all as specified and as directed.

Dismantling Earth Wire, Cradle Guarding, etc., complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded aggregate) as Lean Concrete in Foundation of Poles, Stay Assembly, etc., including Formwork (as/if required), complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded aggregate) as in Coping of Poles, etc. and finishing the Concrete surfaces fair and even including necessary formwork required at Site(s), complete all as specified and as directed.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 Metre long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Aluminium Primer (Externally from Top of Coping) including writing MES Pole No. with synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. NOTE : Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (11.0 Metre long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Aluminium Primer (Externally from Top of Coping) including writing MES Pole No. with synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. NOTE : Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items.

Erecting LT Steel Tubular Swaged Pole of any size/description (Serviceable Pole obtained from Item No. 16 here-in-before) including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Aluminium Primer (Externally from Top of Coping) including writing MES Pole No. with synthetic Enamel Paint (First Grade/ quality), complete all as specified and as directed. NOTE :– (a) Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items. (b) Cost of transporting the Serviceable Pole to location of work within 500 mtr is deemed to be included in the Quoted Unit Rate.

M&L Stay Assembly complete with Accessories as show in Electrical Plate No. 1 of MES Schedule Part-I, diameter of Stay Rod 16mm, size of Plate 230x230x6mm including 7/3.15 mm Galvanised Stay Strand, complete all as specified and as directed. NOTE: Earthwork, Cement Concrete, Mild Steel Stay Clamps with Bolts, Nuts, etc., Loop Insulator, etc. will be measured and paid under approprite Items.

M&L for Cross-arms, Bracings, Supports, Clamps and Back Plates fabricated from Structural Steel Sections including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of one coat of Aluminium Primer one Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed.

Refixing only Cross-arms, Bracings, Supports, Clamps and Back Plates (serviceable materials i.e. Structural Steel Sections obtained from Item No. 8 here-in-before) including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of one coat of Aluminium Primer one Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed.

S & F Insulator Pin type Porcelain, Vitreous, White, Brown or Green including one Galvanised Mild Steel Spindle, Two Galvanised Iron Washers and One Galvanised Iron Nut, 100 mm Height, 65 mm dia for 1100 Volt grade complete all as specified and as directed.

Fixing only Insulator Pin type Porcelain, Vitreous including one Galvanised Mild Steel Spindle Two Galvanised Iron Washers and One Galvanised Iron Nut, of any size 1100 Volt grade (Serviceable Insulator obtained from Item No. 9 here-in- before) complete all as specified and as directed.

S & F Insulator Pin type Porcelain, Vitreous, White, Brown or Green including one Galvanised Mild Steel Spindle, Two Galvanised Iron Washers and One Galvanised Iron Nut, 150mm Height, 150mm dia for 11 KV grade, complete all as specified and as directed

Fixing only Pin type Porcelain, Vitreous, White, Brown or Green including one Galvanised Mild Steel Spindle, Two Galvanised Iron Washers and One Galvanised Iron Nut, of any height and dia 11 KV grade, (Serviceable Insulator obtained from Item No.9 here-in-before) complete all as specified and as directed

S & F Shackle type, Porcelain, Vitreous, White or Brown Insulator of size 75 mm height 90 mm dia including Galvanised Mild Steel 31x3 mm Strap, 12 mm dia Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt, complete all as specified and as directed.

Fixing only Shackle type Porcelain, Vitreous of any size with mild steel strap Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt grade (Serviceable Insulator obtained from Item No. 9 here-in-before), complete all as specified and as directed.

S & F Disc type insulator porcelain, vitreous,145 mm high and 255 mm dia ball and socket Type white , brown or green insulator single Disc Assembly for tension with Tension Clamps for conductors working pressure 11000 Volts, complete all as specified and as directed.

S & F Loop type insulator vitreous white, brown or green, large size with overall dimensions 90 x 65mm, clearance of hole 16mm dia, complete all as specified and as directed.

S & F Aluminium conductor steel reinforced (ACSR) (sizes as ordered) with permissible Sags and providing Jumper, etc., fixing on electric poles and binding to Insulators with aluminium binding wire as in OH Conductors including stringing, tightening, etc., complete all as specified and as directed. NOTE : Cost of Binding Wire is deemed to be included in the quoted Unit Rate.

Releasing ACSR conductor of existing OH Lines by un-binding from Insulator of any description, re-fixing after stretching, re-stringing the conductor, removing excess sag, maintaining proper distance between Conductors as ordered, and binding to insulators with aluminium binding wire complete all as specified and as directed. NOTE : (i) Cost of Binding Wire is deemed to be included in the Quoted Unit Rate. (ii) Dismantling ACSR or AAC Conductors from the Disturbed Span in existing position for stretching will be measured and paid seperately under respective item of schedule

S&F Galvanised Steel Wire 3.15 or 4.0mm dia as earth continuity conductor and fixed to pole, binding with aluminium binding wire, complete all as specified and as directed. NOTE : Cost of Binding Wire shall deem to be included in the Quoted Unit Rate.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 10 Sqmm 2 Core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 10 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed

LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 16 Sqmm 2 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 16 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 25 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 35 Sqmm 3 ½ core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 50 Sqmm 3 ½ core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 70 Sqmm 3 ½ core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 95 Sqmm 3 ½ core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 120 Sqmm 3 ½ core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.

NOTE FOR ( ITEM NO 32 TO 41) : (i) Earthworks, Corrogatted pipe for cable protection, will be measured and paid under appropriate Items. (ii) Steel cable glands of adequate size , aluminium cable socket/ lugs ( bottle/ plate ) of required size at end termination in panel boards/ DBs , & Mild steel flat clamp of size not less than 40x5mm for securing cable pipe along pole , on wall with nut, bolt, washers etc is deemed to be included in the item rate quoated.

Taking down/out unserviceable UG Cables of any Cross Sectional Area and connections and joints including pipes, bricks, etc of any description laying in trenches or fixing with walls / poles, segreating serviceable Bricks/Precast covers, pipes, cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE : Earthwork will be measured and paid under appropriate Items.

M&L cable end jointing kit outdoor termination heat shrinkable type complete with Jointing materials with all accessories suitable for XLPE 11 KV (Earthed), 3 Core, armoured aluminium conductor cable of size 70 Sqmm to 95 Sqmm complete all as specified and as directed

Supply and laying across road crossing reinforced concrete pipes, class NP2, laid and jointed complete with collars of size 200mm complete all as specified and as directed

S&F Switch Air Break Gang Operated for 11 KV grade, Triple Pole vertically mounted on insulator and fitted on steel frame , current rating 200 Amps, mechanically operated mechanism from ground level consisting of operating rod of GI Pipe 25mm bore (dia) ‘light grade’ of suitable length worked from ground level and with locking arrangement mild steel flat Iron clamp 50x6 mm including dismanting old unserviceable switch air break of any descrip tion, complete all as specified and as directed

Supply and laying Cable fit ( Double wall corrugated) Pipes Size 50 mm laid in trenches along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.

Supply and laying Cable fit ( Double wall corrugated) Pipes Size 63 mm laid in trenches along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.

Supply and laying Cable fit ( Double wall corrugated) Pipes Size 75 mm laid in trenches along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.

S&F Straight Through Joints (Epoxy Type) including Jointing Kit complete for making Joints suitable for LT UG XLPE Aluminium Conductor electric Power Cable of size 16 Sqmm to 25 Sqmm, 4 Core,1100 Volt grade complete all as specified and as directed.

S&F Straight Through Joints (Epoxy Type) including Jointing Kit complete for making Joints suitable for LT UG XLPE Aluminium Conductor electric Power Cable of size 35 Sqmm to 70 Sqmm, 4 Core,1100 Volt grade complete all as specified and as directed.

.Dismantling air break gang operated switches HT 11 KV 3 Phase any capacity ( 200 / 400 ) Amps vertical / horizontal mounted including insulators and operating mechanism for repair / replacement of broken / worn out components and insulators etc. with or without taking down from Pole and carrying unserviceable to store for keeping in safe custody as directed by Engnr-in-Charge. Note (i). Parts needed to be replaced shall be measured and paid seperately as supply only against appropriate item of of schedule. However labour component involved in replacement is included in unit rate quoated against this Item.The rate shall deemed to be included for handling of serviceable materials for reuse to site and / or removing to MES store as directed ii).Any minor repairs involved to make the GOD functional even if not notified by Engnr-in-Charge shall be carried out by the Contractor without any extra cost to the Department.

Supply only the following parts (Provisional) suitable to incorporate complete all as specified and as directed

Male contact / moving contact blade

Female contact / Fix contact Jaw

Tinned copper flexible jumper 200 A / 400 A

MS Jumper carrier Make- Jaipuria, Pactil

Back connector plate

Treaming of tree branch, girth not exc. 50 mm around OH electric lines and cleaning upto 3.00 Metre from the OH Electric lines, removing tremmed branches from site (s) and stacking as ordered, complete all as specified and as directed.

Treaming of tree branch, girth , girth exc. 50 mm but not exc. 100 mm around OH electric lines and cleaning upto 3.00 Metre from the OH Electric lines, removing tremmed branches from site (s) and stacking as ordered, complete all as specified and as directed.

Treaming of tree branch, girth exc. 100 mm but not exc. 150 mm around OH electric lines and cleaning upto 3.00 Metre from the OH Electric lines, removing tremmed branches from site (s) and stacking as ordered, complete all as specified and as directed.

S & F MCCB 4 Pole, 415 Volts, with Thermal release range 63 (A) breaking capacity 16 KA , Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 100 (A) breaking capacity 25 KA , Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 125 (A) breaking capacity 25 KA, Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 160 (A) breaking capacity 25 KA , ,Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 200 (A) breaking capacity 25 KA , Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 250 (A) breaking capacity 36 KA , Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

Taking up or down PPR/ UPVC 25mm or galvanised steel tubing 20 mm bore (dia) including connections and fittings from trenches, walls, floors, etc complete all as specified and as directed.

Taking up or down PPR/ UPVC 32mm or galvanised steel tubing 25 mm bore (dia) including connections and fittings from trenches, walls, floors, etc complete all as specified and as directed.

Taking up or down PPR/ UPVC 50 mm/ 63 mm or galvanised steel tubing 40 or 50 mm bore (dia) including connections and fittings from trenches, walls, floors, etc complete all as specified and as directed.

Taking up or down galvanised steel tubing 80 mm bore (dia) with flanged ends/ socket including disconnecting from trenches, walls, floors, etc complete all as specified and as directed.

Taking up or down galvanised steel tubing 100 mm bore (dia) with flanged ends/ socket including disconnecting from trenches, walls, floors, etc complete all as specified and as directed.

Supply & Laying Unplasticiscd PVC pipes 25 mm bore dia of pressure rating 10 kgf/cm2 complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Supply & Laying Unplasticiscd PVC pipes 32mm bore dia of pressure rating 10 kgf/cm2 complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Supply & Laying Unplasticiscd PVC pipes 32mm bore dia of pressure rating 10 kgf/cm2 laid in trenches complete all as specified and as directed. Note - Excavation shall be measured and paid separately

Supply & Laying Unplasticiscd PVC pipes 50 mm bore dia of pressure rating 10 kgf/cm2 laid in trenches complete all as specified and as directed. Note - Excavation shall be measured and paid separately

Supply & Laying Unplasticiscd PVC pipes 63 mm bore dia of pressure rating 10 kgf/cm2 laid in trenches complete all as specified and as directed. Note - Excavation shall be measured and paid separately

Supply, laying and testing Tubes, ' Medium Grade ' galvanised, 80 mm bore with all fittings; laid in trenches complete all as specified and as directed.

Supply, laying and testing Tubes, ' Medium Grade ' galvanised, 100 mm bore with all fittings; laid in trenches complete all as specified and as directed. NOTE for item No 73 & 74: (i) GI Flanged sockets, rubber or fibre board gasket wherever required will be Measured and Paid separately under respective Items as Supply only rate, however labour component involved for fixing is deemed to be included in the unit rate quoated.

Material and labour for joint with rubber or fibre board gasket for flanged pipe and fittings bore of pipe 80 mm complete all as specified and as directed.

Material and labour for Joint with rubber or fibre board gasket for flanged pipe and fittings bore of pipe 100 mm complete all as specified and as directed.

Supply only GI Flange of 80mm dia pipe with mild steel nut, bolt & washers of adequate size complete all as specified and as directed.

Supply only GI Flange of 100mm dia pipe with mild steel nut, bolt & washers of adequate size complete all as specified and as directed.

Supplied and fixed Ball brass valves high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed for

20 mm dia of pipe

15 mm dia of pipe

S & F UPVC Ball valve 50 mm Outer dia heavy weight as per pre requirement of the site with handle screwed both ends for UPVC Pipes or for unions complete all as specified and as directed.

M & L cast iron sluice valve 80mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both ends flanged, having gun metal working parts, stainless steel spindle with cast iron hand wheel with all necessary fixing arrangements such as gaskets, mild steel nuts, bolts, washers, etc. and testing including taking down unserviceable sluice valve, complete all as specified and as directed.

M & L cast iron sluice valve 100mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both ends flanged, having gun metal working parts, stainless steel spindle with cast iron hand wheel with all necessary fixing arrangements such as as gaskets, mild steel nuts, bolts, washers, etc. and testing including taking down unserviceable sluice valve, complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc in existing position capacity Exc 500 and not exc 1000 Ltrs without damaging tank complete all as specified and as directed

All as per item no 83 here-in before but tank size Exc 250 and not exc 500 Ltrs complete all as specified and as directed

Scrapping down, cleaning all Internal surfaces of walls, floors, roof, incoming & outgoing, over flow pipe lines , etc of RCC over head reservoir of capacity one lakh Litres located at kolhapur Military station removing the accumulated sand / silt from the chambers, depositing where directed at a distance not exc. 50 Metre complete all as specified and as directed.

Scrapping down, cleaning all surfaces of walls, floors, roof, incoming & outgoing, over flow pipe lines , etc of RCC over head reservoir of capacity 40,000 Litres located at kolhapur Military station removing the accumulated sand / silt from the chambers, depositing where directed at a distance not exc. 50 Metre complete all as specified and as directed.

Scrapping down, cleaning all surfaces of walls, floors, roof, drainage system etc of Under Ground Clear water sump one lakh Litres located at kolhapur Military station removing the accumulated sand / silt from the Chambers, depositing where directed at a distance not exc. 50 Metre complete all as specified and as directed.

Servicing / over hauling of 3 Phase 415 Volts 1440 RPM 10 HP Mono block motor pump set (Motor Make--Kirloskar/ CG ) Installed at Kolhapur pump House comprising (a). Taking out Motor from its Position by decoupling from Suction delivery lines and disconnecting all cable connections. (b) Dismantaling of induction Motor complete part by part carefully , testing all coils , degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in- Charge to ascertain the serviceability of existing parts.(c)., Heating & varnishing to stator with super quality varnish and dried out properely with external heat as ordered & directed (d) Replacement of pump Gasket set and gland packing rope .(e). Reassembeling the motor complete with all existing serviceable parts obtained against Item 1 (b), greasing the bearing with bearing grease , and new parts as ordered by Engineer in Charge.(f) Reinstall the Mono block Motor pump set at its existing Position , Suction delivery lines by replacing unserviceable nut bolts of existing size connecting all cable connections and testing on completion Note (i). Any Parts required for replacement shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (ii). .Any unforeseen minor repair and minor parts ( Total cost less than Rs 200 ) that are not covered under Item No-1 , (a) to (e) but required to complete the repair work / smooth functioning of Motor shall be deemed to be included in unit rate .Transportation of Stator / Rotor parts for machining , rewinding at work shop are deemed to be included in unit rate quoated. iii). Rewinding of stator / rotor of motor, any machine work where involved shall be measured and paid separetely against relevant item of this schedule.

Supply only the following Items ( PROVISIONAL) of 10 HP Motor to incorporate

DE ( Driver End ) Bearing as per existing size Make- SKF, NBC

NDE ( Non Driver End ) Bearing as per existing size Make- SKF, NBC

Bakelite connection terminal plate with brass nuts bolts and washers

SS Pump Shaft sleeve for Pump shaft

CI Impeller as per Existing

Rewinding burnt coils of Induction Motor stator cap 10 HP obtained from Item Ser No-44 here-in-before with super enamelled copper winding wire as per existing size and guage to achieve the required /specified RPM including taking out old unserviceable winding ,cleaning/ repairing damaged slots , complete as directed

Welding Turning and machining works of Pump Shaft obtained from Item No 90 here-in-before to true size to match with the new parts / existing serviceable parts for proper allignment and smooth operation of Motor Pump set complete all as specified and as directed

S & F cast Iron foot valve of size 80 mm to suction pipe of motor pump set by disconnecting lifting suction Pipe from UG sump and fixing in position after taking down existing unserviceable foot valve complete all as specified and as directed Note (i). Nuts Bolts washers and rubber gasket of adequate size required is included in unit rate quoated against this Item.

Supply and fixing 3 Pole Power contractor suitable for 10 HP Motor star delta starter starter inbuilt in panel or as per existing including taking down existing unserviceable one and connecting complete all as specified and as directed.

Supply and fixing relay suitable for 10 HP Motor star delta starter starter or as per existing including taking down existing unserviceable one complete all as specified and as directed.

S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 15 watts, pre wired, necessary mounting arrangements including provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed

S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 45 watts, pre wired, necessary mounting arrangements including provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed

S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacityv25vwatts, pre wired, necessary mounting arrangements including provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed

S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 60 watts, pre wired, necessary mounting arrangements including provision of provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed

S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 72 watts, pre wired, necessary mounting arrangements including provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed .

S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 90 watts, pre wired, necessary mounting arrangements includingprovision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed .

S & F LED flood light luminarie in aluminium high pressure die cast housing with toughened glass cover & lens (IP65 rating), high power LEDs as light source and electronic driver of capacity 50 watts, pre wired, necessary mounting arrangements including provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed .

S & F LED flood light luminarie in aluminium high pressure die cast housing with toughened glass cover & lens (IP65 rating), high power LEDs as light source and electronic driver of capacity 70 watts, pre wired, necessary mounting arrangements including provision of provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed .

S & F LED flood light luminarie in aluminium high pressure die cast housing with toughened glass cover & lens (IP65 rating), high power LEDs as light source and electronic driver of capacity 90 watts, pre wired, necessary mounting arrangements including provision of provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required including taking down old unserviceable Street Light Fitting fixed at any height form existing location of any description complete all as specified and as directed .

Supply and fixing land scape lighting Modern design LED Post Top lantern, cast aluminium housing with opaque diffuser to deliver uniform light output, IP 65 protection 45 / 50 Watt fitting including provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required and taking down old unserviceable fitting with pole complete all as specified and as directed fitting Make Bajaj Cat No BGCP 45W LED WW or Shakti Cat No SZPGOMX050, or Equivalent in Benlo, Surya, Orient Cat No- LLPT-45-C , Halonix Cat No- HLPT-21-45-CW, Jaquar NOTE : Earthwork, Cement Concrete for foundation, Pipe , etc. will be measured and paid under approprite Items.

Supply and fixing land scape LED Post Top Gate Light , Aluminum housing, clear acrylic diffuser, cast aluminum pole-cap with all accessories 40 Watt fitting including provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required and taking down old unserviceable fitting with pole complete all as specified and as directed fitting. Make- Shakti Cat No- SZPGKMX040 or Equivalent in, Surya, Orient, Philips, Bajaj NOTE : Earthwork, Cement Concrete for foundation, Pipe, etc. will be measured and paid under approprite Items.

Supply and fixing land scape Square shaped bollard with cast aluminium housing 9 Watt complete fitting including provision of 1.0 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required and taking down old unserviceable bollard light Fitting fixed of any description complete all as specified and as directed fitting . Make Shakti cat No SZPGRMX009-600mm, or equivalent in Surya, Philips, Syska, Bajaj

S & F Rectangular pole mounted cable junction box suitable for 3 Phase 440 Volt , 20 Amps of size 200 x140x 95 mm ( IP 55 Protection) made out of SMC sheet 5 mm thickness, cable entry at botton, left hinged door, with & including PVC Bus bar Terminal connection plate for cable connection, SP MCB 6 Amps, and MS clamps to secure box with pole , complete all as specified and as directed. Make Sintex or Equivalent

S&F Surface Mounting Time Switch 240 Volt, 50 Hz, 16-20 Amp rating and connecting with contactor with cable terminations including taking down old unserviceable Time Switch, complete all as specified and as directed. Make Legrand Cat No 4127 94 or Equivalent

S & F Contactor for Street Light Time Switch Type 3 pole contactors, 40 Amp, 415 Volt, including taking down old unserviceable Contactor, complete all as specified and as directed

M&L for taking down LED Light Fitting of any Watt/Make, repairing the same by opening Cover, re-wiring the Light Fitting with existing size Copper Conductor Cable, multi-stranded, replacing unserviceable Parts as required/ ordered, refixing Light Fitting in Original Position after repaired and connecting up, complete all as specified and as directed. NOTE :– (a) Spare Parts such as LED driver etc. required will be measured and paid under appropriate Item(s) as ‘Supply only’. (b) Labour Element for replacement of unserviceable Parts is deemed to be included in the Quoted Unit Rate.

S & F Tubes, ' Light Grade ' galvanised, 50 mm bore with all fittings; laid in trenches complete all as specified and as directed.

Supply only the following Items to incorporate against relevant repairable (street lights)

LED Driver (as approved) for 24 Watt Road Way Lighting Luminaires Voltage Tapping at 230/240 Volt,

LED Driver (as approved) for 36 Watt Road Way Lighting Luminaires Voltage Tapping at 230/240 Volt,

LED Driver (as approved) for 45 Watt Road Way Lighting Luminaires Voltage Tapping at 230/240 Volt,

Servicing only window type air conditioner after visiting at installed site of capacity 1.5 Ton of any make/ type by replacing unserviceable parts, and cleaning of cooling coil, condensing coil, oiling, greasing of blower motor, checking of electrical circuit installation at same location or at site as directed commissioning testing for smooth operation and proper cooling effect complete all as specified and as directed. Note (a). Any Parts required for replacement, charging of gas required shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (b) Rate quated shall be inclusive of transportion from Site to work shop & back after repair within permises. ( c) Any unforeseen minor repair and minor parts that are not covered under Item but required to complete the repair work / smooth functioning of AC shall deemed to be included with the unit rate

Supply only the following Items to incorporate against relevant repairable summer appliances (Window AC)

Fan for blower motor suitable for window type AC up to 1.5 Ton. as on site.

Front grill as per existing suitable for Window type AC upto 1.5 Ton as on site.

Hermetically uncut sealed compressor unit receprocating type for window Type Air conditioner 1.5 Ton

Material and labour for System fusing, welding, soldering, brazing , vaccumising , charging of refrigerant gas to window Type 1.5 Ton and leak testing complete all as specified and as directed

Transporting unserviceable refrigerator of any capacity and make to ascertain the quantam of repairs involved display unserviceable spares / items for inspection of Engnr -in Charge. Assembling of refrigerator with serviceable parts and unserviceable parts to be replaced with new ones as ordered commissioning testing for smooth operation and proper cooling effect complete all as specified and as directed. Note (a). Any Parts required for replacement, charging of gas required shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (b) Rate quated shall be inclusive of transportion from Site to work shop & back after repair within permises. ( c) Any unforeseen minor repair and minor parts that are not covered under Item but required to complete the repair work / smooth functioning of refrigerator shall deemed to be included with the unit rate ( d) Any unforeseen minor repair and minor parts that are not covered under Item but required to complete the repair work / smooth functioning of refrigerator shall deemed to be included with the unit rate

Supply only the following Items to incorporate against relevant repairable summer appliances (refrigerator)

Auto defrost thermostat switch for refrigerator of capacity upto 310 Ltrs. as on site.

Open type relay for refrigerator of capacity upto 310 Ltrs. as on site..

Over load protector for refrigerator of capacity upto 310 Ltrs. as on site.

Hermetically uncut sealed compressor unit for refrigerator of capacity upto 310 Ltrs. as on site

Material and labour for System fusing, welding, soldering, brazing , vaccumising , charging of refrigerant gas for refrigerator of capacity upto 310 Ltrs and leak testing complete all as specified and as directed

Transporting unserviceable Deep freezer of any capacity and make to ascertain the quantam of repairs involved display unserviceable spares / items for inspection of Engnr -in Charge. Assembling of deep freezer with serviceable parts and unserviceable parts to be replaced with new ones as ordered commissioning testing for smooth operation and proper cooling effect complete all as specified and as directed. Note (a). Any Parts required for replacement, charging of gas required shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (b) Rate quated shall be inclusive of transportion from Site to work shop & back after repair within permises. ( c) Any unforeseen minor repair and minor parts that are not covered under Item but required to complete the repair work / smooth functioning of Deep freezer shall deemed to be included with the unit rate

Supply only the following Items to incorporate against relevant repairable summer appliances (Deep freezer)

Thermostat switch suitable for Deep freezer of capacity up to 500 Ltrs. as on site

Open type relay for Deep freezer of capacity upto 500 Ltrs. as on site

Over load protector for Deep freezer of capacity upto 500 Ltrs as on site

Hermetically uncut sealed compressor unit for Deep Freezer capacity 310 Ltr

Material and labour for System fusing, welding, soldering, brazing , vaccumising, charging of refrigerant gas for Deep freezer of capacity upto 500 Ltrs and leak testing complete all as specified and as directed

Transporting unserviceable water cooler of any capacity and make to ascertain the quantam of repairs involved display unserviceable spares / items for inspection of Engnr -in Charge. Assembling of water cooler with serviceable parts and unserviceable parts to be replaced with new ones as ordered commissioning testing for smooth operation and proper cooling effect complete all as specified and as directed. Note (a). Any Parts required for replacement, charging of gas required shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (b) Rate quated shall be inclusive of transportion from Site to work shop & back after repair within permises. ( c) Any unforeseen minor repair and minor parts that are not covered under Item but required to complete the repair work / smooth functioning of water cooler shall deemed to be included with the unit rate

Supply only the following Items to incorporate against relevant repairable summer appliances (water cooler)

Relay suitable for water cooler capacity 40-80 Ltr , As on site.

Over load protector suitable for water cooler capacity 40-80 Ltr, As on site.

Condenser fan motor single phase 230 Volt complete with fan suitable for water cooler 40-80 Ltr As on site.

Automatic thermostat switch suitable for water cooler 40/80 Ltr As on site.

Hermetically uncut sealed compressor unit for water cooler 40/80 Ltr

Material and labour for System fusing, welding, soldering, brazing , vaccumising , charging of refrigerant gas for Deep freezer of capacity upto 500 Ltrs and leak testing complete all as specified and as directed

Supply and fix electric water heater, storage type shock proof with Glass line inner tank (rust proof) and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, including 65 cm ( 02 Nos) heavy duty inlet and outlet chromium plated flexible pipes, shock safe safety plug connected with 3 core cable of suitable size / length, including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed. Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department. Make- Bajaj Model Calenta , Havells Model- Monza DIGI, Racold omnis Lux

Taking down carefully existing unserviceable aluminium/copper point wiring (light, fan, sockets or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials from site and making good disturbed surfaces of walls, floors, ceilings all as specified and as directed.

M & L for point wiring complete with and including single core PVC FRLS insulated unsheathed flexible multistaranded copper conductor cables 1.5 Sqmm (22/0.30mm) 1100 Volts grade drawn through and including heavy grade PVC rigid conduits 20mm or higher dia as reqd at site totally concealed in walls / floors/ ceilings including all conduit accessories / fittings/junction boxes/ inspection covers etc of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing , totally concealed in walls covered with modular white colour cover plate with inner frame suitable to modular switch and sockets, fan regulators etc. including 1.5 Sqmm (22/0.30m) 1100 Volt grade FRLS, PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/ fans etc. at one end and to common earth dolly at other end all as specified , directed for:-

(a) One light point controlled by one, one way switch 6 Amps

(b) One fan point / exhaust fan point controlled by one, one way switch 6 Amps and regulator

(c) One 5 pin 6 Amps switch socket outlet point controlled by one, switch on independent board

(d) One bell point controlled by one, bell switch 6 Amps

(e) One 5 pin 6 Amps switch socket outlet point controlled by one switch on same board

Description all as per 127 here-in before but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 /16 amps socket combination point including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to common earth dolly all as specified and as directed.

M & L for point wiring complete with and including single core PVC FRLS insulated unsheathed flexible multistaranded copper conductor cables 1.5 Sqmm (22/0.30mm) 1100 Volts grade drawn through and including heavy grade PVC casing caping as reqd at site surface mounted on walls / ceilings including all accessories ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing , totally concealed in walls covered with modular white colour cover plate with inner frame suitable to modular switch and sockets, fan regulators etc. including 1.5 Sqmm (22/0.30m) 1100 Volt grade FRLS, PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/ fans etc. at one end and to common earth dolly at other end all as specified , directed for:-

One light point controlled by one, one way switch 6 Amps

One fan point / exhaust fan point controlled by one, one way switch 6 Amps and regulator

One 5 pin 6 Amps switch socket outlet point controlled by one, switch on independent board

One bell point controlled by one, bell switch 6 Amps

One 5 pin 6 Amps switch socket outlet point controlled by one switch on same board

Description all as per 129 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 /16 amps socket socket combination point including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to common earth dolly complete all as specified and as directed.

Supply and fixing Modular switch piano flush type, one way 6A, single module complete all as specified and as directed.

Supply and fixing Modular switch piano flush type, one way 16A, one module complete all as specified and as directed.

Supply and fixing Modular Bell push 6A ,one module complete all as specified and as directed.

Supply and fixing Modular socket outlet multipurpose, 6A -5 pin combined 2 module, complete all as specified and as directed.

Supply and fixing Modular socket outlet multipurpose, 6A/16A - 3 pin 16 A, and 3 pin 6 Amps combined two module, complete all as specified and as directed.

Supply and fixing modular stepped type electronic fan regulator flush type, 120W - 2 module suitable for 230V 50Hz AC supply complete all as specified and as directed.

Supply and fixing switch piano flush type, one way 6A, complete all as specified and as directed.

Supply and fixing switch piano flush type, two way 6A, complete all as specified and as directed.

Supply and fixing Bell push 6A , flush type complete all as specified and as directed.

Supply and fixing switch piano flush type, one way 16A, complete all as specified and as directed.

Supply and fixing socket outlet multipurpose, 6 A - 5 pin complete all as specified and as directed.

Supply and fixing socket outlet multipurpose, 6A/16A- 6 Pin complete all as specified and as directed.

Supply and fixing stepped type electronic fan regulator flush type, suitable for 230V 50Hz AC supply complete all as specified and as directed.

S&F ceiling rose surface type PVC 50 mm dia 3 terminals including PVC mounting block, White/Ivory/Urea finish, ISI marked complete all as specified and as directed.

S & F Bell Ding Dong single pole type suitable for operation on AC. 230 volts, 50 Hz AC supply complete all as specified and as directed..

M & L Lamp holder, (Angle/ bracket) , PVC/ Polycarbonate type insulated body with back plate of brass terminal suitable for batten fittings complete all as specified and as directed.

Supply and fixing 22 Watt LED high quality design PC Batten with decorative end caps light fitting 230 Volts with intregrated electronic driver connector block etc complete with all accessories prewired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing 10 Watt LED high quality design PC Batten aluminium extruded with decorative end caps light fitting 230 Volts with intregrated electronic driver connector block etc complete with all accessories prewired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F Energy saving new generation 10 Watts LED bulk head fitting IP 65 Luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including necessary LED bulb 10 Watt complete all as specified and as directed

S & F downlights LED recess-mounted designer panel round with aluminium die cast housing 12W Cutout: Ø141mm including necessary LED bulb complete all as specified and as directed

S & F Ultra slim LED panel made from extruded aluminium housing frame (recess / pendant) 2ft x 2ft, 36 Watt including necessary LED tube complete all as specified and as directed.

Note for Item - Item cost involves taking down of existing unserviceable fitting / fixtures from site as ordered and fixing in same position after making necessary connections without any extra cost.

Supply only Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/ CFL/LED direct fit lamp, in B-22 cap complete all as specified and as directed

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230 Volts with 100 amps rated bus bars with front openable cover single pole and neutral 4 way consumer unit complete all as specified and as directed

S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230 Volts with 100 amps rated bus bars with front openable cover single pole and neutral 8 way consumer unit complete all as specified and as directed

S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230 Volts with 200 amps rated bus bars with front openable cover single pole and neutral 12 way consumer unit complete all as specified and as directed

S & F sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed.

S & F TPN phase segregated vertical type 4 way 415 volts, 50 Hz distribution board double door, factory made fixed flush with wall inside niches suitable for MCCB incomer 415 Volts, IP 43 protection & for mounting MCBs 230 Volts making electrical connections complete all as specified and as directed.

Supplied & fixed Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240 V 20 Amps complete all as specified and as directed

S& F MCB single pole rated capacity 5 to 32 A, 240 V breaking capacity 10 KA 'C' series complete all as specified and as directed

S& F MCB single pole rated capacity 40 to 63 A, 240 V breaking capacity 10 KA 'C' series complete all as specified and as directed

S& F MCB single pole and neutral rated capacity 6 to 32 A, 240 V breaking capacity 10 KA 'C' series complete all as specified and as directed

S& F MCB tripple pole and neutral rated capacity 16 to 32 A, 415 V breaking capacity 10 KA 'C' series complete all as specified and as directed

S& F MCB tripple pole and neutral rated capacity 40 to 63 A, 415 V breaking capacity 10 KA 'C' series complete all as specified and as directed

Taking down carefully existing unserviceable sub main wiring of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, ceiling and floors as per the existing finishes all as specified and as directed.

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 2.5 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , drawn through in existing surface recessed steel / PVC conduct and conduit accessories complete all as specified and as directed.

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , drawn through in existing surface recessed steel / PVC conduct and conduit accessories complete all as specified and as directed.. Note for item No- 167 & 168 ( Two runs of main copper wire, one run of earth wire cable shall be measured together as one length).

M & L for submain wiring with approved colour coding with Two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sqmm nominal area and drawing in & including PVC rigid heavy duty casing caping and its accessories (ISI marked) of suitable size with one run of PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly all as specified and as directed.

M & L for submain wiring with approved colour coding with Two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing in & including PVC rigid heavy duty casing caping and its accessories (ISI marked) of suitable size with one run of PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly all as specified and as directed. Note for item No 169& 170 ( Two runs of main copper wire, one run of earth wire cable & PVC casing caping shall be measured together as one length).

Servicing / over hauling of ceiling fan 230 Volts of any make and sweep, along with following others repairs. a). Dismantaling of ceiling fan complete part by part carefully, testing stator coils, degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in- Charge to ascertain the serviceability of existing parts. b) Heating & varnishing to stator coils with super quality varnish and dried out properely with external heat as ordered & directed. c) Reassembeling of ceiling fan complete with all existing serviceable parts obtained against Item 1 (a), greasing the bearing with bearing grease , and new parts as required / ordered by Engineer in Charge.

Note (i). Any Parts required for replacement shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (ii).Any unforeseen minor repair and minor parts that are not covered under Item No-1 , (a) to (c) ( Total cost less than Rs 150 ) but required to complete the repair work / smooth functioning of fan shall be deemed to be included with the unit rate. (iii) Transportation of fan to workshop for repair and back to site in EM store yard at Kolhapur is deemed to be included with unit rate. (iii). Rewinding of stator coils of ceiling fan , where involved shall be measured and paid separetely against relevant item of this schedule.

Supply only the following Items to incorporate against relevant ceiling fans complete all as specified and as directed

Ball bearing for bottom cover 6201 or as per existing

Ball bearing for bottom cover 6202 or as per existing

Rotar( shaft) for ceiling fan 1200/1400 mm sweep as per existing.

M & L in replacement of ceiling fan capacitor 2.5 MFD with or without taking down the ceiling fan fixed at any height refixing in original Position after repaired and connecting up, complete all as specified and as directed.

Material and labour for rewinding stator of ceiling fan 1200/1400 mm sweep with supper enameled copper wire of existing gauge, and testing complete all as specified and as directed.

S & F in replacement Wall mounting Fan with remote control Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting ISI marked including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed Make:- USHA, Heleous,Bajaj, Orient Electric I-Tome, Atomberg Effico Plus.

M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including GI strip2 5×4 mm as earthing lead by means of bolts, nuts & checknuts and washers of galvanized iron or steel drawn through GI pipe 40 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with precast RCC cover in CC 1:2:4 type B1 with handle , with G.I 20 mm dia medium grade pipe for watering and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including galvnised steel earthing lead wire 4 mm dia, by means of bolts, nuts & check nuts and washers etc; GI pipe 15 mm dia medium grade pipe for protection of G.I earth lead wire, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion complete all as specified and as directed.

M & L Cement Concrete 1:3:6 (20 mm graded aggregate) as in coping of pole etc including form work & finishing the surfaces even & smooth with out using extra cement complete including demolition of old PCC work complete all as specified and as directed

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

SOURABH ENGINEERS (BID ID -3464299)

K C ENTERPRISES (BID ID -3458785)

GULMOHAR CONSTRUCTION (BID ID -3464023)

Advait Enterprises (BID ID -3464148)

LAXMI ENTERPRISES (BID ID -3464409)

shrilaxminarayan constructions (BID ID -3463694)

m/s Pravin s Bhosale (BID ID -3463629)

Sagar Electricals (BID ID -3464373)

jkconstruction (BID ID -3464079)

SHRIYA CONSTRUCTION (BID ID -3462952)