CA NO. GE AF NO.1/GUR-34/2023-24 REPAIR TO RCC CHAJJA, ALUMINIUM FITTINGS, WALL TILES, PLASTERING, FLOORING, JOINERY, PATHWAY AND REPAIR TO SWTS AT AF STN GURGAON UNDER GE( AF) GURGAON NO 1.

Amount

Taking down Chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame all as specifed and directed by Engr-in-Charge.

Taking down Chowkhats or frames exc 1.5 sqm n exc 4.00 sqm each without taking of shutter from the frame all as specifed and directed by Engr-in-Charge.

Taking down shutter of any discription n.exc 1Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any discription exc 1Sqm and n exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.

M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified.

S&F anodised aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) doors shutters aluminium section weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S&F 12mm thick pre-laminated particle board, interior grade, prelaminatedboth side with decorative choice lamination fixed with screws to timber frame work complete all as specified.

S&F 300mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt all as specified directed by Engr in Charge.

S&F double action floor spring hydraulically regulated made up of aluminium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F for 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane fixed with aluminum beads. The rates includes the beading, PVC rubber packing with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F Aluminum Anodized Deko grill MG 104(100mmx105mm) including necessry FUH channel joint cleats screws etc complete all as specified and directed.

S&F for 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane fixed with aluminum beads. The rates includes the beading, PVC rubber packing with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F for 5.50mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane fixed with aluminum beads. The rates includes the beading, PVC rubber packing complete of any type complete all as specified and directed.

S&F in repair Aluminium Extruted section ISI marked Door closer hydraulically regulated, designation No. 3, universal type, itable for door shutters of 851to 1000 mm in width and of weight complete all as specified and as directed by Engineer-in-Charge.

M&L for polyester powder coated aluminium sliding cupboard shutter panel meduim weight aluminium section as Horizontal members size 63.5x38.10mm at 0.75 Kg/M and verticle member size 63.5x38.10 mm at 0.75Kg/M cupboard panel incluing clips, rubbers beading aluminium beading and sicing to the adjoining/ existing wall/ partition etc with all necessary fitting/ fizture etc complete all as spectified by ENgr-in-Charge incl aluminium frame/ chowkhat for sliding door shutter cupboard of section 101.0x44.44 mm of gauge 16 fixed to masonery/concrete surface (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) including powder coated aluminium fittings such handle (1 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, powder coated aluminium snap beading screw, Steelness steel hinges 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board to be measured and paid separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge. Make JINDAL/ HINDAL/ INDALCO

M&L for second class Hardwood 35 mmthickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and as directed by Engr-in-Charge.

S&F factory made 30mm thick solid core Flush door shutter with block board with BWP plywood on both side complete all as specified and as directed by Engr-in-Charge.

M&L second class hardwood 35mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel moulded PVC wooden grain door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed..

M &L 2nd class Hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M & L preparation of new wood surfaces and applying two coats of sythetic enamel paint over a coat of wood primer complete all as specified.

M & L preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F for Aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded section of length of bolt in 200mm complete all as specified and directed.

S&F aluminium anodised 150 mm long tower bolt complete all as specified and directed.

S&F aluminium anodised 100 mm long tower bolt complete all as specified and directed.

S&F aluminium anodised 100 mm handle complete all as specified and directed.

S&F aluminium anodised 150 mm handle complete all as specified and directed.

S & F 100 mm size mild steel butt hinges medium weight cold rolled and fixed with screws or welding where required complete all as specified and directed.

S&F 100mm long medium grade stainless steel but hinges bright polished fix with nut and bolt complete all as specified and directed by Engr-in-Charge.

S&F 18/19mm thick Preliminated particle boards interior grade,preliminated one side with dacorative choice lamination & other side blancing white lamination fixed with screws to timber frame work complete all as specified.

Extra over item of Prelaminated particle board for external teak wood lipping, 6mm thick, fixed with nails suitable for 18mm thick complete all as specified and directed.

S&F continous (piano)hinges mild steel,bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed.

Hasp and staple, Alumimium anodised length 75mm length, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F for insulated PVC wall lining 40mm thick consisting of PVC insulated panels having expanded polysterene (EPS) stuck to to 2mm thick insulated panel with wood grain printed PVC sheet duly fitted into the wall each panel interlock with with each otherdown. complete all as specified and directed by Engr-in-Charge.

M&L false ceiling of approved (ISI marked) make with 12mm thick gypsum board fixed to Aluminium anodised grid 600x600mm size suspended system fixed to Aluminium framed work of approved make and section as specified in SSR Part I with suitableHangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long ceiling system is to be fixed in water level without any sag and complete all as specified and directed by Engr-in-Charge.

S&F in repair 8 to 10mm thick densifed regular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm without disterbing the other false ceiling and making good existing frame with all as specified and directed by Engr-in-Charge.

Demolition of RCC of any descrition and in any position not other wise specially provided(reinforcement cut as required to facilitate demolition) for complete all as specified and directed by Engineer in Charge.

Demolition of brick work built in cement mortar including all qoins, arches, pillars, etc. complete all as specified and as directed by Engr-in-Charge.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

Material and labour for exposing the existing reinforcement bars fully in the repairs area and remove all loose scale and corrosion deposits protective coating zinc primer apply the bars before concreting for complete all as specified and directed by Engineer in Charge .

M&L for Formwork to sides and soffits of floor or roof beams, lintels,shelves etc for fair finished, flat surfaces of concrete complete all as specified and directed by Engineer in Charge

M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregates for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified and directed.

M&L for pre cast Kerb stone with plain fair faces 300x150x300 mm depth of PCC 1:1 ½ :3 of shape as approved incl all excavation, embedding in ground and removing surplus spoil upto 50 Mtr distance incl removal of existing completed all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings exc 15 cm thickness above ground level as in sunken floors etc complete all as specified and directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) 75mm thick for surafce finish complete all as specified and as directed.

M&L coloured machine pressed precast concrete interlocking paver blocks of rubber moulded any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified. Note:- compacted thickness of sand shall be considered for the payment.

Dismantling floor hearth or wall tiles including cement mortar (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement to match the shade of the slab including rubbing and polishing, including 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as dierected.

M&L machine cut kota stone slab flooring 20-25mm thick in riser of steps,skirting,dado and pillar laid over cement screed base laid and jointed with grey cement to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down cement plaster including raking out joints hacking for key and scrubbing down with water complete all as specified and directed.

M & L 15 mm thick rendering in CM (1:6) on vertical surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed.

M & L 15 mm thick rendering in CM (1:4) on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound (WPC will be measured and paid separately) complete all as specified and directed.

M & L for rendering 5 mm thick on ceiling on fair faces of concrete surface in Cm 1:4 finished even and smooth without using extra cement all as specified

M & L for preparation of new plastered surfaces of walls and applying two coat of Oil Bound distemper of approved tint, over a coat of 3mm thick wall care putty complete all as specified.

M & L for preparation of newly plastered surfaces and applying two coats of cement base paint over coat of chack primer on walls,facia and chajja complete all as specified.

M&L for preparation of newly plastered surfacesapplying 3 coats of white washing on internal/ external ceiling complete all as specified.

Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction all as directed by Engr-in-Charge.

M&L for Complete removal of existing treatment upto plastered surfaces including preparation of old decorated surfaces of walls and cornices and applying one coat primer, two coat of acrylic emulsion paint over two coat of cement base JK/birla putty upto 4th storey including necessary scaffolding all as specified and directed by Engineer-in-Charge.

S&F in repair venetian blinds for windows/door/ventelator of any colour and pattern as approved including connected items ie. rod, hook etc and complete fitting all as specified and as directed by Engineer-in-Charge.

S&F in repair Zebra venetain blinds for door and windows / ventilators of colour / pattern as approved including connected items such as rod , hook etc complete all as specified and directed by Engineer-in-Charge.

S & F in repair 15 mm chromium plated cast copper alloy bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. (Make: Prayag Cat No : 8306 or equivalent out of make specified in CA .

S&F in repair Brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe all as specified and as directed by Enginerr-in-charge. (Make: Prayag Cat No : 7155 equivalent out of make specified in CA.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe all as specified and as directed by Enginerr-in-charge(Make: (Make: Prayag Cat No : 7175 equivalent out of make specified in CA.

S & F in repair 15 mm dia bore angle Cock with Flange chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed. (Make: Prayag Cat No : PIS-10 equivalent out of make specified in CA.

Supply and fixed in repair 15 mm dia bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.(Make: Prayag ) Cat No : 8306 equivalent out of make specified in CA.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and as directed.

Supply only 32mm dia waste cupling fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed.

S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) including shower arms 15 mm size 195 mm long with bend complete all as specified and as directed.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified

M&L Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of RCC SWT tank by dewatering removing all deposite materials like sand silt, sludge, impuritie etc, washing of side walls, scraping with iron brush to removal all type of scales, filling up cavaties by cement motar 1:1 and washing walls with lime powder complete all as specified and directed by Engr-in-Charge.

Dismantling of mild steel work of any description not other wise provided of all as direted by Engr-in-Charge.

M&L for MS rolled sections as in main and cross beams, channel, angle,tee hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe- 410 (Gde E-250 )quality 'B' all as specified and directed by Engr-in-Charge. Note:-Posts/struts or structural section and similar work of angle iron made to shape shall be welded to existing angle iron bracket of security wall and any other Non accessible, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge.

M&L for expanded metal, weight exc 4/Kg per sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight all as specified and directed by Engr-in-Charge.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm depth exc 50mm and not exc 100 deep complete all as specified

Hard core of guage exc 63 mm but n.exc 100mm deposited spread and levelled in layers n.exc 15cm thick watered and rolled/ rammed to a true surfaces of broken stone boulders complete all as specified.

Rolling and consolidating formation surfaces with Power Roller exc 8 tonne n exc 12 tonne complete all as specified.

M&L Plain cement concrete type C-2, 1:3:6(40mm graded stone aggregate) 100mm thick for surafce finish complete all as specified and as directed.

M&L Plain cement concrete type B-2, 1:2:4(40mm graded stone aggregate) 100mm thick for surafce finish complete all as specified and as directed.

M & L metallic floor hardner 20mm thick laid on concrete floors and pavings, and finished even and smooth complete all as specified and as directed.

S&F exterior aluminium composit panel (ACP) sheets 4mm thick along with aluminium frame fixed with screws as a popuplar choice for building cladding , facades , canopies , overhangs , soffits etc . The material light weight and durable properties aluminium composite panels are composed of two thin massive aluminium sheets bonded to a core of plastic polyethylene complete all as specified and as directed.

Note:- The amount of Rs 73075/- against Schedule of Credit on Page No 144 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

J.P. Enterprises

J D ENTERPRISES

shakti construction

M/S ujjwal associates

PAWAN KUMAR

Phogat Builders

M/S Parshant Associates