Renovation of Field Hostel at Saryu Nahar Colony in District-Ayodhya

Amount

Earth work in Excavation of foundation with all type of soil including lead & lift requaired for proper completion of the work.

Laying C.C.(M-10) 1:3:6 in foundation with cement,coarse sand and Stone grit of size 4.75 to 20.00 mm.with all cost of material, labour and T&P.

Ist Class Brick Work in 1:4 CM Cement and Coarse Sand including all cost of material, labour and T&P.

Centering and shuttering for R.C.C 1:1.5:3 with all cost of material, labour and T&P.

Laying C.C.(M-20) 1:1.5:3 with Cement, Coarse sand & Stone Grit 4.75mm. to 20.00mm. with all cost of material, labour and T&P. etc.

Laying R.C.C. 1:1.5:3 with Cement, Coarse sand & Stone Grit 4.75mm. to 20.00mm. with all cost of material, labour and T&P. etc.

Cutting, Bending, Binding, and Placing in Position Reinforcement including all cost of labour,material and T&P. etc.required for proper completion of work.

12mm. Thick cement plaster in 1:4 CM with coarse sand including all cost of material, labour and T&P required to complete the work. Including dismentling old damaged Plaster.

12mm. Thick cement plaster in 1:4 CM with coarse sand including all cost of material, labour and T&P required to complete the work.

Providing and applying cement based putty on average thickness of 1mm.of approved brand and manufacture over wall shurface to prapare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade, new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting two coat with synthetic Enamel Paint of Superior quality on door/window , on Wooden surface with all cost of material,Labour and T&P.

Painting two coat with synthetic Enamel Paint of Superior quality on door/window Grill , and Wiremesh on Steel surface with all cost of material,Labour and T&P.

Supply & Laying of 80mm. thick Zig Zag shapped mechanically compressed inter locking cement concrete pavers block. including cost of bedding sand and joint filling with sand & all material, labour T&P etc. require for proper completion of work as directed by Engineer-in-charge.(Cement Grey and Ordinary Red.)

Providing & laying tiles in 600X600mm.size (thickness to be specified by the manufacurer) with water absorbtion less than 0.08% & confirming to IS15622 of approved make in all colours and shades laid on 20mm. Thick cement mortor 1:4 CM & Coarse sand Jointing with grey cement slurry @3.3Kg./ Sq.m. including grouting the joint with white cement and matching pigments etc.complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc. complete.

Providing and fixing wordrobe shutters with 1mm thick mica pressed on 20mm thick plywood with frame and nessosary fitings etc complete.

Fabrication of Miled Steel/ Iron Work in Grill, Gates Railing, Door and Window frame including cutting, drilling, welding/riveting and hinges where ever necessary and fixing in position including all cost of material and T&P. required for proper completion of work with one coat of Red Oxide Primer.

Providing and fixing Alluminium work for door, windows/ventilators and partitions with extruded built up standered tubular section/appropriate Z-section and other section in field hostel and S.N.K. Colony.

Providing and fixing glazing in Alluminium door, windows/ventilators shutters and partitions etc. with EPDM rubber/neoprene gasket etc complete as per the architectural drawing and directions of engineer in charge(cost alluminium snap beading shail be paid in basic items) in field hostel and S.N.K. Colony.

Providing and fixing anodised Alluminium grill of approved design/pattern with approved standerd section and fix to the existing window frame in field hostel and S.N.K. Colony.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm.

Providing & Fixing of False Ceiling including all cost of material, labour and T&P. etc.complete.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Supplying & Fixing of recess mounting round 15 to 18 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink,diffuser/Reflector and driver set complete in all respect.

PVC Wall Panneling in wall of approved brand manufacture on decorative wall surface, with all cost of material, labour and T&P. etc.complete.

Supplying & Fixing of Fluorescent single tube LED type fitting duly wired etc of approved make complete.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Cutting chases in brick masonry walls for pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) 100 mm dia metre.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing 100x75 mm dia Hubless trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. As per IS:15905

Providing and fixing soil, waste and vent pipes

100 mm dia hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905.

75 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

100 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside &outside as per IS:15905

75 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing terminal guard :

100 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing plain bend of required degree.

100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

75 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing double equal plain junction of required degree.

100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

75 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

15 mm nominal dia Pipes metre

20 mm nominal dia Pipes metre

25 mm nominal dia Pipes metre

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing water closet squatting pan of size 580x440 mm with integral type foot rests (Indian type W.C.pan ) with 100 mm P.V.C. P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required

Providing and fixing wash basin 550x400 mm with single 15 mm C.P. brass pillar tap and C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing uplasticised PVC connection pipe 45 cm length, 15 mm nominal bore with brass unions.

P.T.M.T. extension nipple 15 mm dia.

Providing and fixing P.V.C. low level flushing cistern10 litre capacity with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

Providing and fixing CP Brass Single lever telephonic wall mixer 15 mm nominal dia of quality & make as approved by Engineer in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter each

Providing and fixing M.S. stays and clamps for sand cast iron /centrifugally cast (spun) iron pipes of diameter :

For 100 mm dia pipe

For 75 mm dia pipe

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore.

S.C.I. gully or nahani grating 100 mm dia.

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe

100 mm dia SS 304 grade coupling with EPDM rubber gasket

75 mm dia 17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required

Wiring for circuit/ submain wirng along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

2 X 4 sq. mm + 1 X 4 sq. mm earth wire.

2 X 6 sq. mm + 1 X 6 sq. mm earth wire.

2 X 10 sq. mm + 1 X 6 sq. mm earth wire.

Supplying and drawing following size of FRLS PVC insulated Copper condutor single core cable in the existing surface/recesses steel/ PVC conduit as required.

2 X 1.5 sq. mm .

2 X 2.5 sq. mm .

Supplying and fixing following modular switch /socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required.

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing following Size/modular GI box alongwith modular base and cover plate for modular switeches in racess etc. as required.

4 module (125mmx75mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required

Supplying and fixing PVC batten/angle holder including connection etc as required.

Installation, testing, commissioning of wall bracket/celling fittings/Fan of all size. etc complete.

Supplying and fixing Electronic fan Regulator of aproved quality. including connection etc as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

8 way (4 + 24), Double door

12 way (4 + 36), Double door.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker single pole suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 V, 63A isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with G.I earth pipe 4.5 metre long, 40mm dia including accessories complete with all respect.

Supply & Fixing of 100W L.E.D. steet light with appropriate fixtures and nacessary connection etc. complete.

Supply & Fixing of Three phase Control panel board with appropriate fixtures and nacessary connection etc. complete.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :9.47.1 20 mm dia (heavy type) metre.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x63x3.2 mm .

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm .

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm .

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc. complete.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Dismantling cement conc. or brick orgranolithic floor including base concrete and stacking of dismantled materialas directed by engineer in charge within a distance of 60 m

M/S VAIBHAV CONSTRUCTION

M/S SINGH CONSTRUCTION COMPANY

M/S RAM SAGAR YADAV CONTRACTOR

M/S RANA PRATAP SINGH