Constt./Renovation of Building at MS Dhar Kohar

Amount

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead :

Of sectional area below 40 sqcm.

Of sectional area above 40 sqcm.

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead G.S. Sheet

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 350 gram/m2

Providing GI Ridges/hips of 0.63mm thick GI sheets, fixed with 8m J/L hooks

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge:

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like Cement mortar 1:6 (1 Cement : 6 coarse sand)(Including all leads and lifts and all type of carriages by MT/HL)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)(Including all leads and lifts and all type of carriages by MT/HL)

Reinforcement for RCC work including cutting,straightening ,bending ,binding etc.

Flooring 50mm thick in 1:2:4 mix

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.(Including all leads and lifts and all type of carriages by MT/HL)

Centring and shuttering including struting propping removal

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips 40 mm wide and 4 mm thick

Providing and fixing panelled or panelled and glazed shutters(35mm) for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately. 2nd class deodar

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick .Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete . Fixed to openin/wooden frames with rawl plug screws etc

Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0. 901itre/1 Osqm over an under coat of primer applied @ 0. 801itre/1 Osqm of approved brand and manufacturer

Colour washing such as green blue or buff to give an even shade

Sign board as per RDD specification including painting writing complete job

Joginder Singh