Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹52.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹54.8 L+₹2.0 L (3.72%)Rejected-AOC NEAR SATSANG GARACHARMA BASTI GARACHARMA PORT BLAIR 744 105 | PORT BLAIR | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744105 | L2 | Rejected-AOC Being Not L1 | |
| 3 | L3₹57.2 L+₹4.4 L (8.27%)Rejected-AOC 94A APR COLONY BILHARI JABALPUR MP | JABALPUR | MADHYA PRADESH | 482020 | L3 | Rejected-AOC Being Not L1 | |
| 4 | L4₹59.2 L+₹6.4 L (12.1%)Rejected-AOC LAMBA LINE PB NO 414 JUNGLIGHAT PO PORT BLAIR A N 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-AOC Being Not L1 | |
| 5 | L5₹69.4 L+₹16.6 L (31.4%)Rejected-AOC 183 MG ROAD JUNGLIGHAT PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN NICOBAR ISLANDS | 744103 | L5 | Rejected-AOC Being Not L1 |
Tender Value
₹65.9 L
EMD Value
₹1.2 L
Closing Date
17 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Arvind Bhakuni, CWE
Commander Works Engineer, Military Engineer Services, Junglighat PO, Port Blair - 741103
81016 ADN ALTN AND REPAIR TO EXISTING PERIMETER WALL ON THE SOUTH EASTERN SIDE OF 34 WEU UNDER GE MINNIEBAY
2023_MES_580299_1
81016 Adn Altn Perimeter wall GE Minniebay PB
Open Tender
Civil Works
Item Rate
180 days
Port Blair
As per NIT
8 documents required · 8 mandatory
₹1,000
GE Minniebay
₹1.2 L
Yes
12 May 2023
10 Feb 2023
23 Mar 2023
10 Feb 2023
17 Mar 2023
3 Mar 2023
10 Feb 2023 - 17 Feb 2023
Amount
Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, and similar work for rough finished flat surfaces complete all as specified and as directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns, and coping beam stanchions complete all as specified and as directed.
M&L for Form work in lintel beams, roof beams and bend of rough finished concrete surfaces complete all as specified and directed.
M&L for Plain Cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations,filling and mass concrete complete all as specified and as directed.
M&L RCC M30 grade (Design Mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams; bases for coloumns, etc basement slabs, under-reamed piles and mass concrete complete.
M&L RCC M30 grade (Design Mix) using 20mm graded stone aggregate as in columns, pillars, piers, post and struts etc complete.
M&L RCC M30 grade (Design Mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, coping, lintel beam,bend etc complete.
M&L for drilling up to 12 mm dia holes in to RCC slab / wall / Column /beams to a required depth & provide shear connector rod of length of 150mm bent to "L" shape with 75mm to be embedded in hole & 75mm to be used as dowel, fixed with polyster resin grout mixed mechanically and pour the same into the hole and insert the shear connector and finish the top; allow the same to set complete all as per manufacturer's instructions and as directed. [Make of grout : 'Lokfix S' of make : M/s Fosroc chemicals India (P) Ltd. or equivalent in M/s Harjas Coatings & Polymers / M/s Pidlite Industries Ltd. / M/s Sika India Pvt Ltd / M/s BASF India Ltd.
M & L for non shrink, cementitious Micro concrete mixed with 12.5mm graded crushed stone aggregate in the ratio by weight 18kg aggregate: 25kg micro concrete respectively or as per manufacturer's instructions, as in sides and soffits of beams, jacketing of columns, roof slab and similar structural members including necessary form work for fair finished surfaces. The formwork shall be water tight to facilitate pouring of micro concrete complete all as per manufacturer's instructions and as directed.
M&L for CRS bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to CRS bars complete all as specified and directed.
M&L for TMT bars 5mm dia and over up to and including 10mm dia in stirrups,spacers and binders cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to deformed or twisted bars.
M&L for plain cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings cavings, bed plats and embeding swan neck fencing post, etc incl weathering slightly rounded or chamfered angles and throating as directed complete all as specified and directed.
Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.
M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) all as specified.
Taking down cement plaster on brick or stone wall and racking out joints hacking for key scrubbing down with water etc.
M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair without using extra cement complete all as specified and as directed.
M & L for preparation of newly palstered surfaces on walls providing necessary scaffolding & safety precautions and applying one or two coats of damp proof primer (primer coat) using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable or operating single spray gun with a max material hose length of 30m and Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm anti algal weather coat 100% acrylic smooth emulsion paint using airless spray technology with max works pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.
M & L for complete removal of old existing treatment/finishes on walls providing necessary scaffolding & safety precautions and cleaning the surfaces free from any loose paint, dust, greases, growth of fungus, algae or moss using wire bresh and leveling the surface even and smooth using mechanical sander and finally applying water by pressure jet washer of max pressure of 170 bar with automatic pressure relief system. The follwoing process shall be initiated only after the above surface preparations:- (a) Filling the surface cracks using crack seal compound on required consistency using electric mixer. (b) Filling the dents and holes using wall care putty in appropriate ratio using electric mixer. (c) Applying one or two coats of damp proof primer (primer coat) using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable or operating single spray gun with a max matecial hose length of 30m (d) Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm anti algal weather coat 100% acrylic smooth emulsion paint using airless spray technology with max works pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.
Note for ItemNo. 21& 22: (i) Work shall be executed only through authorized applicator duly approved by Manufacturer of paint and certificate in this connection shall be submitted by the contractor. (ii) The affected area of the wall due to dampness shall be ascertained by moisture meter of power input 9V Display 60 LED using colour code scale and moisture measurement of each location shall be submitted along with RAR. (iii) The contractor shall submit MOU letter with any one of Paintmanufacurer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorized applicator shall have valid authorization letter from the manufacturer the authorization letter needs to be valid for the complete period of execution of the painting work. (iv) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (v) Building wise stage passing register shall be maintained & submitted along with RAR/FB duly signed by Engr-in-Charge and contractor. (vi) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. The specification and details of the equipments and tools pertaining to this item is denoted on Particular Specification. Manual method of paint application is not allowed and also Penalty shall be levied if appropriate tools & equipments pertaining to smart painting not used. Contd.../-
(vii) Proper masking arrangement shall be carried before the application of primer or paint. (viii) The other coat of Primer and paint shall be applied only aftr the completion of drying time and comply with recoating period as per manufacturer instructions. (ix) Cost of scaffolding upto (G+3) height of building shall be included in the quoted rate.
M & L for preparation of old plastered surfaces of wall and applying one coat of acrylic emulsion based premium quality finish exterior antifungal paint all as per manufacturers instructions and all as directed by the Engineer-in-charge.
M&L for dismantling of wrought iron or mild steel work of any description not otherwise provided for
M&L for MS work incl embedding in concrete and screwing bolts, posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc incl all necessary drilling, bolting or rivetting, etc and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.
M&L in repairs for galvanised, 2 strand steel barbed wire 2mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of stranded rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc as directed each line wire to be measures complete all as specified.
M&L for galvanised, 2 strand steel barbed wire 2mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of stranded rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc as directed each line wire to be measures complete all as specified.
Supply and fix punched tape concertina coil of 610 mm, openable/ stretchabe to 6.0mm round type, 51 spirals core wire made out of 2.5 mm high tensile steel wire galvanised with with tensile 1500 Mpa as specified in IS - 4454 including necessary wire for fixing coil on security compound wall to Y shaped MS angle complete all as specified and as directed.
M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing Fe 410-W(Gde?E- 250) quality?A?Gradecomplete.
M&L PVC Coated GI chain link fencing with mesh including fixing of MS line wire/rod,Flat iron and machine made hexagonal or square head bolts to fencing posts including dismantling of old chain link fencing complete all as specified and directed. NOTE :- MS Rod,flat iron,bolts will be measured and paid seperately.
M&L for mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc complete all as specified and as directed.
M&L for 10 mm dia MS round bars cut to length bent to shape required etc..(to be used for stiffness to chain link) fixed indepdently to the angle iron post as directed by Engr-In-Charge. (Conforming to Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165)
S&F MS screw bolts (machine made 12 mm dia. Shank) with hexagonal or square heads at one end and screwed at another end, each screwed end to be fitted with washer and one hexagonal or square nut, exc. 5cm n. exc 10 cm in length.
M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of old painted steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M & L for providing cement concrete 1:3:6, type B1 (using 40 mm graded stone aggregate) as in surface channel and drains etc complete.
M&L for 18/20mm thick Granite (of any type) tiles machine cut in wall cladding/skirting/dado laid over and including rendering CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.
M & L for Cement plaster Setting coat 3mm thick, trowelled to even and smooth finish complete all as specified and directed.
M/s Sriya Enterprises
Ravi Enterprises
SB ENTERPRISE
Hindustan Traders
RADHA GOVIND CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .