Undergrounding of Overhead 11 kV Birhana Road Feeder and 11 kV Karachi Khana Feeder Passing through Birhana Road under EUDD- Phool Bagh Kesco., Kanpur (Turn-Key Basis)

Supply of S.T. Pole 11.00 Mtr. long

Supply of S.T. Pole 9.5 Mtr. long

Supply of Top Channel 2.4 Mtr.

Supply of Guarding Channel 2.8

Supply of Bracing Angle

Supply of Stay Rod 20x1800 mm

Supply of Stay Wire 3.15 MM 7/10 SWG GSS Wire

Supply of Stay Clamp 5½"

Supply of M.S. Clamp 5½"

Supply of M.S. Clamp 6½"

Supply of Earthing Rod

Supply of Earthing Wire

Supply of G.I. Pipe/Old Pole 3 Mtr.

Supply of LT AB Cable (3x150+1x120+1x16) Sq.mm.

Supply of Piercing Connector 150-25 Sq.mmm

Supply of LT Bare Neutral Connector

Supply of Dead end clamp with Eye Hook & Holding Clamp

Supply of Dead end sealing cap

Supply of LT Cable 1x25 Sq.mm

Supply of Alu. Lug. 25 Sq. mm

Supply of Distribution Box Three Phase with clamp

Supply of Suspension clamp with Eye Hook & Holding Clamp

Supply of Danger Board for 11 Kv Line with Clamp

Supply of Bracing Clamp 5½"

Supply of Bracing Clamp 6½"

Supply of ACSR Dog Conductor

Supply of C.I. Packing Pcs. 5½"

Supply of C.I. Packing Pcs. 6½"

Supply of T-off Channel 1.8

Supply of 11 KV Pin Insulator

Supply of 11 KV G.I. Pin

Supply of Al Lug 300 sq.mm

Supply of Nut & Bolt with washer

Supply of 11 KV 3x300 sq.mm XLPE Cable

Supply of 11 KV 3x185 sq.mm XLPE Cable

Supply of 11 KV 3x300 sq.mm XLPE O/D Cable

Supply of 11 KV 3x185 sq.mm XLPE O/D Cable

Supply of 11 KV 3x300 sq.mm XLPE St. Through Cable Box

Supply of 11 KV 3x185 sq.mm XLPE St. Through Cable Box

Supply of M.S. Pipe 200MM dia

Loading, Carriage and unloading of poles from store to work site or vice versa

Erection of Double pole structure by digging of pit by hydra

Dismentalling of Damaged S.T. Pole of very Critical Position with the help of crane after remaving all the accessories from damged pole and its all related wotk including digging of pit or by cutting with gas cutter.

Grouting of pole with cement brick ballast and coarse sand as per standard specification.

Making plinth of single pole of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials.

Painting of S.T. pole with one coat of red oxide and two coats of Aluminium Paint including cost of Ist Class enamel paint.

Earthing of supports by sagging of M.S. earthing rod 20mm and connecting with earth wire and related works as per standard specifications.

Fabrication/modification of MS Item as per requirement of site

Fixing of MS Channel (100x50x6 )mm 2.4 / 2.8/ 0.35 mtr. Long/T-off

Making 11 KV Straight Through joint including digging of pit upto 1.1 Mtr. Depth.

Taking out 33kv and 11 kV 3x70 to 3x300 XLPE Cable/LT Cable except service cable from cable drum before laying and transportation of the cables from store to work site or vice-versa.

Digging of Trench for laying of 11 KV and 33 KV cable in metallic road in size of 30 cm. wide and 1 to 1.5 meter deep.

Laying of M.S. Pipe in above Digged Trench.

Laying of cable through above laid M.S. Pipe.

Laying of XLPE cables of all sizes except service cables in above digged trench covering with bricks and back filling upto Pole or in any already existing trench or Pole to Pole with required clamping material

Laying of H.T. XLPE cable with HDPE pipe along with the supply of pipe(HDD/Open Trench method)

Laying of 33 KV/11 KV XLPE cable by H.D.D. method

Making indoor/outdoor joints of 33KV/11KV all size Cables where the cable is being laid. Jointing Kit will be provided by the Department.

Mounting of cable box on pole, cable support structure with handling of concerning cable and proper fixing (With G.I. pipe of 3 metre )

Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work.

Opening of L.T. Jumpers

Making of H.T. Jumpers from 3 Phase 3 Wire H.T. O.H. line for erection work.

Making of L.T. Jumpers from 3 Phase 3 Wire L.T. O.H. line for erection work.

Mounting of 11 kV Pin Insulator/Disc Insulator

Dismentalling of binding wire from insulators and loosening of the ACSR mixed conductor on each pole then lowering down the ACSR mixed conductor & rolling into bundles.

Dismantling of M.S. Channel/X-arm/Guarding angle

Erection of Earth Rod complete.

Fixing of stay rod and its erection and grouting by fitting of stay clamp. Stay wire and its proper binding and tightening etc.

Loading, Carriage and unloading of ACSR Dog/Panther Conductor from store to work site or vice-versa.

Laying, Stringing & Tensioning of ACSR Dog Conductor for making jumpers on riser.

Erection of Bracing set

Supply and erection of 11 kV 3-Way RMU along with all related works including earthing,foundation, commissioning,etc.

Dismantling and resagging/rearranging existing L.T. A.B.Cable including supply of any additional clamping materials as per instructions of KESCo/District Administration and use of existing materials

Loading, carriage and unloading of Aerial Bunched Cable from store to work site or vice-versa.

Mounting & Erection of three phase distribution box of AB Cable with Piercing Connector, L.T. Bare Neutral Connector, Alu. Lug 25 mm, L.T. Cable 1x25 mm etc. No.

Dismantling of AB cable safely for resuse

Laying of LT Aerial Bunched Cable on erected Steel Tubular Pole

Disconnection of H.T./L.T. Lines, Shifting of T/F from ground/plinth to a safe place for construction of T/F plinth.

Construction of T/F plinth, suitable for mounting of distribution transformer. Size of the plinth will be 1.2 x 1.2 x 1.2 meter solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth.

Shifting of T/F from ground to plinth or vice versa and re-connection/disconnection of H.T. L.T. Lines as well as earthing for proper completion.

Deep Bore GI Pipe Earthing including supply Size GI Pipe 40mm dia B-Class 80 feet long with socket cutter, earth wire 7/14 SWG, Nut & bolts with connection of pipe to distribution T/F Neutral or Body all material shall be provided by contractor with cost of all material.

Fabrication, erection & grouting of T/F fencing of frame size 3x2.4 mtr. including cost of M.S. Angle size 40x40x5 and M.S. Flat size 35x5, fixing of welded steel wire fabric on steel frames by welding of 10 SWG wire fabric, including Painting fo two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil and dust.

Shifting of consumer connections to the new network/rearranging of consumer service cables

Connecting of newly erected network with KESCo mains including testing, commissioning and energization of the same completely.

Carriage of all concerning stock material from KESCo Store to site or vice-versa.

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER