REPAIR/MAINT TO CERTAIN ITEMS OF WOODEN FURNITURE UNDER GE(AWC) MHOW

Amount

FD/E6 /MAP/14: STOOL DRESING LADIES: S & F in replacement of Seat made of 75 mm thick, 40 density foam with fabricated leathorised Rexine on 12 mm thick commercial ply wood as per existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD/E6 /MAP/14: STOOL DRESING LADIES: S & F in replacement of fabricated leathorised Rexine on seat of stool dressing as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD/E6 /MAP/14: STOOL DRESING LADIES: S & F in replacement of legs of size as shown on drg of Ist class hard wood MP Teak MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6 /MAP/14: STOOL DRESING LADIES: S & F in replacement of front/ rear rail of size as shown on drg of existing size and shape of Ist class hard wood MP Teak MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6 /MAP/14: STOOL DRESING LADIES: S & F in replacement of side rail of size as shown on drg of existing size and shape of Ist class hard wood MP Teak MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6 /MAP/14: STOOL DRESING LADIES: S & F in replacement of stiffener of existing size and shape of Ist class hard wood MP Teak MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6 /MAP/14: STOOL DRESING LADIES: M&L French Polishing Stool Dressing of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD/E6/MAP/04 (R): TROLLY FOR TV: Remove unsv legs, Supply & Fixing new caster wheels legs as per drg and as directed by Engr-in-Charge.

FD/E6/MAP/04 (R): TROLLY FOR TV: S & F in replacement of top of 18mm thick pre-laminated particle board with 4 mm teak wood edging all around including polishing to match with the existing, complete all as specified, as shown on drawing and as directed by Engineer-in- Charge.

FD/E6/MAP/04 (R): TROLLY FOR TV: S & F in replacement of sides/back/bottom of 18mm thick pre-laminated particle board of size as shown on drawing and as directed by Engineer-in- Charge.

FD/E6/MAP/04 (R): TROLLY FOR TV: S & F in replacement of lower shutter 5mm glass complete as shown on drawing and as directed by Engr-in-Charge.

FD/E6/MAP/04(R): TROLLY FOR TV: S & F in replacement of upper shutter glass 5mm thick complete as shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/334: BOOK RACK: S & F in replacement of sides/bottom/Top of 18mm thick pre-laminated particle board of exterior grade with half round beading of teak wood size as shown on drawing and as directed by Engineer-in- Charge.

CEJZ/SKD/334: BOOK RACK: S & F in replacement of Shutters with Hinges, Magnetic Catcher, Hasp & Staple & knob size and shape complete all as specified, as shown in drawing and as directed by Engr-in- Charge.

CEJZ/SKD/334: BOOK RACK: S & F in replacement of back of book rack with 6mm thick ply wood as per existing size and shape and as directed by Engr-in-Charge.

CEJZ/SKD/334: BOOK RACK: S & F in replacement of maroon blazer cloth as shown on drg and as directed by Engr-in-Charge.

CEJZ/SKD/334: BOOK RACK: M&L French Polishingto book rack of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

(FD/E6/MAP/4(R) FD/E6/MAP-II/07: TABLE DRESSING LADIES WITH STOOL: S & F in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, complete all as specified, as directed by Engr-in-Charge.

(FD/E6/MAP/4(R) FD/E6/MAP-II/07: TABLE DRESSING LADIES WITH STOOL: S & F in replacement drawer made out of 18 mm thick pre laminated particle board as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in- Charge.

(FD/E6/MAP/4(R) FD/E6/MAP-II/07: TABLE DRESSING LADIES WITH STOOL: S & F in replacement 5 mm thick looking mirror as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.

(FD/E6/MAP/4(R) FD/E6/MAP-II/07: TABLE DRESSING LADIES WITH STOOL: S & F in replacement of back made of 6 mm thick commercial ply as per existing size and shape complete as specified, all as shown in drawing and as directed by Engr-in-Charge.

(FD/E6/MAP/4(R) FD/E6/MAP-II/07: TABLE DRESSING LADIES WITH STOOL: Remove unsv caster wheel, Supply & Fixing new caster wheels of stool dressing as per drg and as directed by Engr-in-Charge.

(FD/E6/MAP/4(R) FD/E6/MAP-II/07: TABLE DRESSING LADIES WITH STOOL: S & F in replacement of Seat made of 75 mm thick , 40 density foam with fabricated leathorised Rexine as per existing , of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

(FD/E6/MAP/4(R) FD/E6/MAP-II/07: TABLE DRESSING LADIES WITH STOOL: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

CHAIR PLASTIC MOULDED (DINING WITH CUSHION): Removing unserviceable velvet cloth and Foam cushion for seat and S & F new velvet cloth and foam cushion as per existing and sample approved by Engr-in-Charge/ GE and to be fixed properly.

CHAIR PLASTIC MOULDED (DINING WITH CUSHION): Removing unserviceable velvet cloth for back and S & F new velvet cloth as per existing and sample approved by Engr-in-Charge/GE and to be fixed properly.

CEJZ/SKD/336: TABLE COMPUTER: S & F in replacement of Top of computer Table size as shown in drg made of 18 mm pre laminated particle board with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/336: TABLE COMPUTER: S & F in replacement of shelf/ key board of size as shown in drawing made of 18mm thick pre-laminated particle board with channel for key board as per existing size and shape complete all as specified as directed by Engr-in-Charge.

CEJZ/SKD/336: TABLE COMPUTER: S & F in replacement of Caster wheel for computer Table as per existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

CEJZ/SKD/341: DOUBLE BED WITH ROLL OUT BED: S & F in replacement of 12 mm thick commercial plywood of existing size and shape complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/341: DOUBLE BED WITH ROLL OUT BED: S & F in replacement of middle/side rail made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/341: DOUBLE BED WITH ROLL OUT BED: S & F in replacement of head rest Made out of 18 mm pre-laminated particle board of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in- Charge.

CEJZ/SKD/341: DOUBLE BED WITH ROLL OUT BED: S & F in replacement of foot rest Made out of Made out of 18 mm pre-laminated particle board of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/341: DOUBLE BED WITH ROLL OUT BED: S & F in replacement of stiffener made out of Ist class hard wood MP Teak MP Teak including polishing to match with existing size and shape complete all as specified, shown on drawing and as directed.

CEJZ/SKD/341: DOUBLE BED WITH ROLL OUT BED: Removing unserviceable PVC shoes and S & F with new shoes as per existing pattern and as directed by Engr-in-Charge.

CEJZ/SKD/341: DOUBLE BED WITH ROLL OUT BED: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/340: DRESSING TABLE AND BED ROOM RACK: Removing unserviceable front shutter with piano hinges and S & F new shutters 18 mm pre-laminated particle board of size as shown on drg, piono hinges with teak wood beading including polishing as per existing pattern all as per drg and as directed by Engr-in-Charge.

CEJZ/SKD/340: DRESSING TABLE AND BED ROOM RACK: Removing unserviceable sides and S & F new sides 18mm pre-laminated particle board of size as shown on drg with teak wood beading including polishing as per existing pattern all as per existing pattern as per drg and directed by Engr-in-Charge.

CEJZ/SKD/340: DRESSING TABLE AND BED ROOM RACK: Removing unserviceable back and S & F new back 6mm commercial ply wood with teak wood beading all around of size as shown on drg including polishing as per existing pattern all as per drg and as directed by Engr-in-Charge.

CEJZ/SKD/340: DRESSING TABLE AND BED ROOM RACK: Removing unserviceable anodised metallic knob 20mm and S & F new knob as per sample and approved by Engr-in-Charge / GE.

CEJZ/SKD/340: DRESSING TABLE AND BED ROOM RACK: Removing unserviceable frame and looking mirror and S & F new looking mirror 5mm thick with existing pegs including polish as per existing pattern, all as per drawing and as directed by Engr-in-Charge.

CEJZ/SKD/340: DRESSING TABLE AND BED ROOM RACK: Removing unserviceable cushion of seat and S & F new cushion 50mm thick with tapestry cloth cover all as existing pattern, drg and as directed by Engr-in-Charge.

CEJZ/SKD/340: DRESSING TABLE AND BED ROOM RACK: Removing unserviceable peg sets and S & F new peg set as per existing pattern, drg and as directed by Engr-in-Charge.

CEJZ/SKD/340: DRESSING TABLE AND BED ROOM RACK: M & L one coat of French polish on wooden surfaces of any width of girth including scrapping & cleaning all as per drawing & as directed by Engr-in-Charge. Items shall be carried out in occupied Officers Qtrs, unit lines & furniture yard.

CEJZ/SKD/333: KITCHEN CABINET: S & F in replacement of top/bottom size as shown on drg made of 18mm thick pre-laminated particle board existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

CEJZ/SKD/333: KITCHEN CABINET: S & F in replacement of sides size as shown on drg made of 18mm thick pre-laminated particle board existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

CEJZ/SKD/333: KITCHEN CABINET: S & F in replacement of back size as shown on drg made of 6 mm thick commercial ply of existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

CEJZ/SKD/333: KITCHEN CABINET: S & F in replacement of shelf size as shown on drg made of 12 mm thick BWR commercial ply wood shall be provided and existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in- Charge.

CEJZ/SKD/333: KITCHEN CABINET: S & F in replacement of 18 mm thick pre-laminated particle board shutters with magnetic catchers and knob to be provided as per existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: Removing unserviceable Foam with tapestry cover and S & F new Foam with tapestry cover 100 mm thick 40 density of size as shown in drg as per existing pattern and as directed by Engr-in-Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: Removing unserviceable Foam with tapestry cover and S & F new Foam with tapestry cover 50 mm thick, 40 density, size as shown in drg, as per existing pattern and as directed by Engr-in-Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: Removing unserviceable Foam with tapestry cover and S & F new Foam with tapestry cover 50 mm thick, 40 density size as shown in drg, as per existing pattern and as directed by Engr-in-Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: Removing unserviceable PVC rollers and S & F in replacement with new PVC roller set of 3 as per existing pattern and as directed by Engr-in -Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: Removing unserviceable top ply 12 mm thick and S & F with new commercial ply 12mm thick size as per drg and as directed by Engr-in-Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: Removing unserviceable stiffener for rollout bed and S & F new stiffener teak wood size as per drg and as directed by Engr-in-Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: Removing unserviceable PVC shoes and S & F with new shoes as per existing pattern and as directed by Engr-in-Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: S & F in replacement of sides 18/19 mm thick pre-laminated particle board, teak face of existing size with 6 mm teak wood edging including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/ 339: SETTEE WITH ROLL OUT BED: M & L one coat of French polish on wooden surfaces of any width of girth including scrapping & cleaning all as per drawing & as directed by Engr-in-Charge. Items shall be carried out in occupied Officers Qtrs, unit lines & furniture yard.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: Removing unserviceable pre laminated particle board top/bottom side and providing new 18mm thick pre-laminated particle board as per drg and as directed by Engr-in-Charge.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: Removing unserviceable pre laminated particle board of shelves and S & F new 18mm prelaminated particle board of size with teak wood beading all as per drg and directed by Engr-in-Charge.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: Removing unserviceable sides of particle board and supply and fixing new 18mm pre laminated particle board of size as per drg and directed by Engr-in-Charge.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: Removing unserviceable magnetic stopper and S & F new maganetic stopper as per existing pattern all as per drg and as directed by Engr-in-Charge.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: Removing unserviceable front shutter right and left side with piano hinges and S & F new shutters 18 mm pre laminated particle board Piano hinges with teak wood beading including polishing as per existing pattern all as per drg and as directed by Engr-in-Charge.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: Removing unserviceable back of ply wood and S & F new 6mm commercial ply wood of size as shown on drg and as directed by Engr-in-Charge.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: M & L one coat of French polish on wooden surfaces of any width of girth including scrapping & cleaning all as per drawing & as directed by Engr-in-Charge. Items shall be carried out in occupied Officers Qtrs, unit lines & furniture yard.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: Removing unserviceable and S & F new legs wooden teak wood size as shown in drg and as directed by Engr-in-Charge.

CEJZ/SKD/342: SIDE CABINET WITH SHUTTER: Removing unserviceable and desired metallic Knob 20mm and S & F new knob as per sample and approved by Engr-in-Charge/GE.

FD- 281 & 373: SOFA CHAIR SINGLE SEATER: S & F in replacement of arm made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 281 & 373: SOFA CHAIR SINGLE SEATER: S & F in replacement of front leg made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge.

FD- 281 & 373: SOFA CHAIR SINGLE SEATER: S & F in replacement of rear leg made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

FD- 281 & 373: SOFA CHAIR SINGLE SEATER: S & F in replacement of front long rail made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 281 & 373: SOFA CHAIR SINGLE SEATER: S & F in replacement of foam 40 density 100 mm thick and including covering with tapestry cloth not less than Rs. 350/- per metre of width 1.2 Mtr complete all as per drawing and as directed.

FD- 281 & 373: SOFA CHAIR SINGLE SEATER: S & F in replacement of tapestry cloth not less than Rs. 350/- per metre of width 1.2 Mtr complete all as per drawing and as directed by Engr-in-Charge.

FD- 281 & 373: SOFA CHAIR SINGLE SEATER: M&L French Polishing to Sofa chair of any description width of girth including cleaning and preparation of the surface to match with the existing complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/337: TABLE BED SIDE SPL: S & F in replacement back sheet 6mm thick BWR Ply of size as shown on drawing with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/337: TABLE BED SIDE SPL: S & F in replacement of drawer, the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/337: TABLE BED SIDE SPL: Removing unserviceable metallic Knob 20mm and S & F new knob as per sample approved by Engr-in-Charge/GE.

CEJZ/SKD/337: TABLE BED SIDE SPL: S & F in replacement of bottom rail of existing size and shape Ist class hard wood MP Teak MP Teak including polishing to match with the existing complete all as specified, shown on drawing ad as and as directed by Engr-in-Charge.

CEJZ/SKD/343: TABLE DINING (930 X 930 X 790mm): S & F in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/343: TABLE DINING (930 X 930 X 790mm): S & F in replacement of drawer size as shown in drg, the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/343: TABLE DINING (930 X 930 X 790mm): S & F in replacement of drawer size as shown on drg, the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

CEJZ/SKD/343: TABLE DINING (930 X 930 X 790mm): Removing unserviceable metallic Knob 20mm and S & F new knob as per sample approved by Engr-in-Charge/GE.

FD- 55, 209, 231, 284: TABLE 3'X2' WITHOUT DRAWER: S & F in replacement of top 18mm thick pre-laminated particle board of size as shown on drawing, shade as approved with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 55, 209, 231, 284: TABLE 3'X2' WITHOUT DRAWER: S & F in replacement of leg made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 55, 209, 231, 284: TABLE 3'X2' WITHOUT DRAWER: S & F in replacement of top side rail of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 55, 209, 231, 284: TABLE 3'X2' WITHOUT DRAWER: M&L French Polishing to Table of any description width of girth including cleaning and preparation of the surface complete all as specified, shown on drawing and as directed by Engr-in-Charge.

TP: TABLE 3'X2' STUDENT TYPE: S & F in replacement of top 18mm thick pre-laminated particle board of size as as per existing, with 4 mm teak wood edging all around including polishing to match with the existing and as directed by Engr-in-Charge.

TP: TABLE 3'X2' STUDENT TYPE: S & F in replacement of leg made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing and as directed by Engr-in-Charge.

TP: TABLE 3'X2' STUDENT TYPE: S & F in replacement of top side rail of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.

TP: TABLE 3'X2' STUDENT TYPE: M&L French Polishing to Table of any description width of girth including cleaning and preparation of the surface complete all as specified and as directed by Engr-in-Charge.

CEJZ/SKD/335: WALL RACK: S & F in replacement of top/bottom made of 18mm thick pre-laminated particle board as per existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

CEJZ/SKD/335: WALL RACK: S & F in replacement of sides made of 18 mm thick pre-laminated particle board existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in- Charge.

CEJZ/SKD/335: WALL RACK: S & F in replacement of back made of 8 mm thick teak face of existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

CEJZ/SKD/335: WALL RACK: S & F in replacement of openable glass shutter 5 mm thick with magnetic stopper, pivot type fixing arrangement for glass shutter including glass shelves as per existing size and shape, as shown in drg and as directed by Engr-in-Charge.

FD - 33, 249, 275 : TABLE WRITING: S & F in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, Shade as approved with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD - 33, 249, 275 : TABLE WRITING: S & F in replacement of leg made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

FD - 33, 249, 275 : TABLE WRITING: S & F in replacement of side stiffener made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

FD - 33, 249, 275 : TABLE WRITING: S & F in replacement of centre stiffener made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD - 33, 249, 275 : TABLE WRITING: S & F in replacement drawer made out of 12 mm thick teak wood plank and 6 mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

FD - 33, 249, 275 : TABLE WRITING: S & F in replacement shutter made out of 18 mm thick pre-laminated particle board as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD - 33, 249, 275 : TABLE WRITING: S & F in replacement side and back ply made out of 6 mm thick ply as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD - 33, 249, 275 : TABLE WRITING: M&L French Polishing to Table writing of any description width of girth including cleaning and preparing the surface for the articles of table writing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 201 & 229 : CHAIR EASY: S & F in replacement of rear and front legs of Ist class hard wood MP Teak MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD- 201 & 229 : CHAIR EASY: S & F in replacement of front rail and Stiffener of Ist class hard wood MP Teak MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD- 201 & 229 : CHAIR EASY: S & F in replacement of rear rail of Ist class hard wood MP Teak MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD- 201 & 229 : CHAIR EASY: S & F in replacement of top rail of Ist class hard wood MP Teak MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD- 201 & 229 : CHAIR EASY: S & F in replacement of arm rest of Ist class hard wood MP Teak MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD- 201 & 229 : CHAIR EASY: M&L French Polishing to Chair Easy of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD-34, 232, 278, 382 & DB-3974: TEAPOY: S & F in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, Shade as approved with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-34, 232, 278, 382 & DB-3974: TEAPOY: S & F in replacement of leg made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

FD-34, 232, 278, 382 & DB-3974: TEAPOY: S & F in replacement of front/ side rail/ Stiffener / corner made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-34, 232, 278, 382 & DB-3974: TEAPOY: M&L French Polishing to teapoy of any description width of girth including cleaning and preparing the surface for the articles of teapoy complete all as specified, and shown on drawing and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: S & F in replacement of front legs of existing size and shape / pattern as shown on drawing of Ist class hard wood MP Teak MP Teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: S & F in replacement of rear legs of existing size and shape/ pattern as shown on drawing of Ist class hard wood MP Teak MP Teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: S & F in replacement of side/front/rear rail of existing size and shape Ist class hard wood MP Teak MP Teak including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: S & F in replacement of back vertical strips as per existing size & shape of Ist class MP teak wood including polishing to match with the existing complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: S & F in replacement of stiffener of existing size and shape of Ist class hard wood MP Teak MP Teak including polishing to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: S & F in replacement of back rest of of existing size and shape of Ist class hard wood MP Teak MP Teak including polishing to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: S & F in replacement of Seat made of 75 mm thick, 32 density foam with fabricated leathorised rexine on 12 mm thick commercial ply as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: S & F in replacement of fabricated leathorised rexine on seat of chair DINING as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD/E6/MAP/10, FD/MAP-II/04: CHAIR DINING: M&L French Polishing, to chair dining of any description width or girth including cleaning & preparation of surface complete all as specified as shown in drawing as directed by Engr-in-Charge.

FD- 29, 274, 235, 375: TABLE CENTRE: S & F in replacement of top 18mm thick pre-laminated particle board of size as shown on drawing, Shade as approved with 4 mm teak wood edging all around including polishing to match the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 29, 274, 235, 375: TABLE CENTRE: S & F in replacement of leg made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 29, 274, 235, 375: TABLE CENTRE: S & F in replacement of side rail made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr- in-Charge.

FD- 29, 274, 235, 375: TABLE CENTRE: S & F in replacement of front/rear rail made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 29, 274, 235, 375: TABLE CENTRE: S & F in replacement of stiffener made out of Ist class hard wood MP Teak MP Teak of existing size and shape including polishing of surface to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 29, 274, 235, 375: TABLE CENTRE: M&L French Polishing to Table Centre of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD-228, 279: CHAIR DINING: S & F in replacement of front legs size as shown on drawing of Ist class hard wood MP Teak MP Teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.

FD-228, 279: CHAIR DINING: S & F in replacement of rear legs of shape & pattern as shown on drawing of Ist class hard wood MP Teak MP Teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.

FD-228, 279: CHAIR DINING: S & F in replacement of side /front /rear rail of Ist class hard wood MP Teak MP Teak including polishing with to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-228, 279: CHAIR DINING: S & F in replacement of stiffener of Ist class hard wood MP Teak MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr- in-Charge.

FD-228, 279: CHAIR DINING: S & F in replacement of back rest of Ist class hard wood MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-228, 279: CHAIR DINING: M&L French Polishing to Chair DINING of any description width of girth including cleaning and preparation of the surface for the articles of Chair dining complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD- 25, 236 & 384: PEG TABLE: S & F in replacement top of 18mm thick pre-laminated particle board of size as shown in drawing with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 25, 236 & 384: PEG TABLE: S & F in replacement of leg made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 25, 236 & 384: PEG TABLE: S & F in replacement of front/ side rail/ Stiffener/corner made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 25, 236 & 384: PEG TABLE: M&L French Polishing to peg Table of any description width of girth including cleaning and preparation of the surface for the articles of peg table complete all as specified and directed and shown on drawing.

FD- 281 & 373: SOFA SET FIVE SEATER (3+1+1): S & F in replacement of arm made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 281 & 373: SOFA SET FIVE SEATER (3+1+1): S & F in replacement of front leg made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in Charge.

FD- 281 & 373: SOFA SET FIVE SEATER (3+1+1): S & F in replacement of rear leg made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 281 & 373: SOFA SET FIVE SEATER (3+1+1): S & F in replacement of front long rail of three seater made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 281 & 373: SOFA SET FIVE SEATER (3+1+1): S & F in replacement of front long rail of single seater made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 281 & 373: SOFA SET FIVE SEATER (3+1+1): S & F in replacement of foam 40 density 100 mm thick and including covering with tapestry cloth not less than Rs. 350/- per Mtr of width 1.2 mtr complete all as per drawing and as directed by Engr-in-Charge.

FD- 281 & 373: SOFA SET FIVE SEATER (3+1+1): S & F in replacement of tapestry cloth not less than Rs. 350/- per metre of width 1.2 Mtr complete all as per drawing and as directed.

FD- 281 & 373: SOFA SET FIVE SEATER (3+1+1): M&L French Polishing to Sofa set Five Seater of any description width of girth including cleaning and preparation of the surface to match with the existing complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD-250, FD-280: CHAIR WRITING: S & F in replacement of front legs of Ist class hard wood MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-250, FD-280: CHAIR WRITING: S & F in replacement of rear legs of Ist class hard wood MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-250, FD-280: CHAIR WRITING: S & F in replacement of side /front /rear rail of Ist class hard wood MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-250, FD-280: CHAIR WRITING: S & F in replacement of arm rest of Ist class hard wood MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-250, FD-280: CHAIR WRITING: S & F in replacement of stiffener of Ist class hard wood MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-250, FD-280: CHAIR WRITING: S & F in replacement of back rest of Ist class hard wood MP Teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-250, FD-280: CHAIR WRITING: M&L French Polishing to Chair Writing of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of 5 mm thick looking mirror Size and shape as shown on drg including fitting with the teak wood frame & polish to frame with High glossy French polish and complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of back made of 6 mm thick commercial ply Size and shape as shown on drg, complete as specified, all as shown in drawing and as directed by Engr-in-Charge.

FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of plain glass shelf of size 565 x100 x 5mm thick duly grinded smoothly to edges as per existing size and shape as shown on drawing complete all as specified, as shown in drawing and as directed by Engr-in- Charge.

FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: M & L French Polishing to Table Dressing gents with mirror of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD – 213, 246, 247: BED HARD PLY WOOD TOP: S & F in replacement of 12 mm thick commercial plywood type AA ( ISI -303 Marked ) of existing size and shape complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD – 213, 246, 247: BED HARD PLY WOOD TOP: S & F in replacement of long rail made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD – 213, 246, 247: BED HARD PLY WOOD TOP: S & F in replacement of head rest ply of 4mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD – 213, 246, 247: BED HARD PLY WOOD TOP: S & F in replacement of foot rest ply of 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD – 213, 246, 247: BED HARD PLY WOOD TOP: S & F in replacement of stiffener made out of Ist class hard wood MP Teak including polishing to match with existing size and shape complete all as specified, shown on drawing and as directed.

FD – 213, 246, 247: BED HARD PLY WOOD TOP: S & F in replacement of head rest made out of Ist class hard wood MP Teak frame with 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD – 213, 246, 247: BED HARD PLY WOOD TOP: S & F in replacement of foot rest made out of Ist class hard wood MP Teak frame with 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD – 213, 246, 247: BED HARD PLY WOOD TOP: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD/E6/ MAP/09: BIN LINEN MULTI PURPOSE: S & F in replacement of top made of 18mm thick pre-laminated particle board existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6/ MAP/09: BIN LINEN MULTI PURPOSE: S & F in replacement of sides made of 18mm thick pre-laminated particle board existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6/ MAP/09: BIN LINEN MULTI PURPOSE: S & F in replacement of back made of 12 mm thick commercial ply of existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6/ MAP/09: BIN LINEN MULTI PURPOSE: S & F in replacement of drawer made of 12 mm thick pre-laminated particle board and bottom made of 6mm thick commercial ply of existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD/E6/ MAP/09: BIN LINEN MULTI PURPOSE: M&L French Polishing to bin linen Multipurpose of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD - 251 & 378: TABLE DRESSING LADIES WITH MIRROR: S & F in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD - 251 & 378: TABLE DRESSING LADIES WITH MIRROR: S & F in replacement drawer made out of 12 mm thick teak wood plank and 6mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD - 251 & 378: TABLE DRESSING LADIES WITH MIRROR: S & F in replacement 5 mm thick looking mirror as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD - 251 & 378: TABLE DRESSING LADIES WITH MIRROR: M&L French Polishing with Hi-gloss French polish of any description width of girth including prepration of the surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD-26 & 241, 1112: SIDE BOARD: S & F in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge

FD-26 & 241, 1112: SIDE BOARD: S & F in replacement of drawer made out of 12 mm thick teak wood plank and 6mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-26 & 241, 1112: SIDE BOARD: S & F in replacement shutter made out of 18 mm thick pre-laminated particle board as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-26 & 241, 1112: SIDE BOARD: S & F in replacement of back made out of 6 mm thick ply at back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-26 & 241, 1112: SIDE BOARD: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparation of surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD & DB : RE-CANNING OF CHAIRS: Taking down old cane from the all type of chairs and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as per drawing and as directed :- (a) Chairs dining/Chair Writing (b) All type of Chair Easy (c) Stool Dressing

POLISHING :- M&L French Polishing of DB 4049: Almirah Large 1/2 H x 1/2 Shelves wooden all surface (Internal and external as shown on drawings) of any description width of girth including cleaning and preparing the surface for the articles of wooden furniture complete all as specified and directed and shown on drawing. French polish of to be used after approval by Engr-in-Charge /GE.

Description same as per item no. 180.00 but of FD 109 (M): Almirah Large with shelves Wooden.

Description same as per item no. 180.00 but of FD 114 (M): Almirah Medium 1/2H x 1/2 Shelves wooden.

Description same as per item no. 180.00 but of FD 110 (M): Almirah Medium with Shelves Wooden.

Description same as per item no. 180.00 but of FD 22, FD 45: Book Case Small DB.

Description same as per item no. 180.00 but of FD 54, 222: Locker Bed side.

Description same as per item no. 180.00 but of DB 4119: Table office officer wooden.

Description same as per item no. 180.00 but of F 67: Table writing off size small.

Description same as per item no. 180.00 but of FD 35: Rack wooden w/o draj.

Description same as per item no. 180.00 but of DB 4044: Table Bed side w/o Drawer.

Description same as per item no. 180.00 but of FD 78: Form with Back wooden.

Description same as per item no. 180.00 but of DB/FD 77: Form without Back.

Description same as per item no. 180.00 but of FD 80(M): Peg Set of three.

Description same as per item no. 180.00 but of FD 373: Sofa set 2 seater.

Description same as per item no. 180.00 but of Table Dining of Size 1200 x 900 mm.

FD -30, 239 & 273 Similar type: TABLE DINING 6 PERSONS: S & F in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD -30, 239 & 273 Similar type: TABLE DINING 6 PERSONS: S & F in replacement of leg made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD -30, 239 & 273 Similar type: TABLE DINING 6 PERSONS: S & F in replacement of side rail made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD -30, 239 & 273 Similar type: TABLE DINING 6 PERSONS: S & F in replacement of front / rear rail made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD -30, 239 & 273 Similar type: TABLE DINING 6 PERSONS: M&L Polishing with Hi-gloss French polish of any description width of girth including preparation of surface complete all as specified, as shown on drawing and directed by Engr-in-Charge.

FD-273, 376 or Similar type: TABLE DINING 8 PERSONS: S & F in replacement top of 18mm thick pre-laminated particle board size as shown on drawing with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-273, 376 or Similar type: TABLE DINING 8 PERSONS: S & F in replacement of leg made out of Ist class hard wood MP Teak of existing size and shape including polishing with to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

FD-273, 376 or Similar type: TABLE DINING 8 PERSONS: S & F in replacement of side rail made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-273, 376 or Similar type: TABLE DINING 8 PERSONS: S & F in replacement of front/rear rail made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-273, 376 or Similar type: TABLE DINING 8 PERSONS: M&L French Polishing to Table DINING 8 Pers of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD- 291: TABLE 900 MM X 900 MM X 760 MM: S & F in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed.

FD- 291: TABLE 900 MM X 900 MM X 760 MM: S & F in replacement of leg made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 291: TABLE 900 MM X 900 MM X 760 MM: S & F in replacement of top / side rail of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD- 291: TABLE 900 MM X 900 MM X 760 MM: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparation of surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

TP & FD-274: CENTRE TABLE GLASS TOP: S & F in replacement top of glass 8mm thick with rubber buffers of size & shape as per existing and as directed by Engr-in-Charge.

TP: CHAIR PLASTIC WITH ARMS MODEL: Removing unserviceable velvet cloth and Foam cushion for seat and S & F new velvet cloth and foam cushion as per existing and sample approved by Engr-in-Charge/ GE and to be fixed properly.

TP: CHAIR PLASTIC WITH ARMS MODEL: Removing unserviceable velvet cloth for back and S & F new velvet cloth as per existing and sample approved by Engr-in-Charge/GE and to be fixed properly.

FD-362, FD 206 & FD-233: HAT STAND WITH MIRROR: S & F in replacement of 5 mm thick looking mirror as per existing size and shape including fitting with teak wood frame & polish to frame with High glossy French polish and complete all as specified, as shown in drawing and as directed by Engr-in-Charge.

FD-362, FD 206 & FD-233: HAT STAND WITH MIRROR: S & F in replacement of back made of 6 mm thick commercial ply Size as per existing size and shape complete as specified, all as shown in drawing and as directed by Engr-in-Charge.

FD-362, FD 206 & FD-233: HAT STAND WITH MIRROR: S & F in replacement of steel pegs as per existing size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.

FD-362, FD 206 & FD-233: HAT STAND WITH MIRROR: M & L French Polishing to Hat Stand with mirror of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD-234 (M) & 373: SOFA SET FOR 3 PERSONS: S & F in replacement of arm made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-234 (M) & 373: SOFA SET FOR 3 PERSONS: S & F in replacement of front leg made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in Charge.

FD-234 (M) & 373: SOFA SET FOR 3 PERSONS: S & F in replacement of rear leg made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-234 (M) & 373: SOFA SET FOR 3 PERSONS: S & F in replacement of front long rail/rear long rail made out of Ist class hard wood MP Teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD-234 (M) & 373: SOFA SET FOR 3 PERSONS: S & F in replacement of foam 40 density 100 mm thick and including covering with tapestry cloth not less than Rs. 350/- per Mtr of width 1.2 mtr complete all as per drawing and as directed by Engr-in-Charge.

FD-234 (M) & 373: SOFA SET FOR 3 PERSONS: S & F in replacement of tapestry cloth not less than Rs. 350/- per metre of width 1.2 Mtr complete all as per drawing and as directed.

FD-234 (M) & 373: SOFA SET FOR 3 PERSONS: M&L French Polishing to Sofa set Five Seater of any description width of girth including cleaning and preparation of the surface to match with the existing complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: Removing of existing broken seat frames rails of chair and fixing of new 1st class hard wood MP Teak rails of size as shown on drawing and as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: Removing of existing broken wooden supporting batten of top back portion of chair dining long back and S&F with new 1st class hard wood MP Teak supporters of size as shown on drawing and as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: Description same as per item no. 224.00 but long supporting batten of size as shown on drg and as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: Removing of existing plywood and rexine and u/s cushion from damaged seat and S&F of new plywood 6 mm thick of size as shown on drg, fixed with 20 density foam of 50 mm thick duly covered with leatheriest rexine as shown on drawing and as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: Description same as per item no. 226.00 but for back of size as shown on drawing and as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: Removing of existing broken front legs of chair DINING long back and S&F of new 1st class hard wood legs of size as shown on drawing and as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: M&L French Polishing to chair dining of any description width or girth including cleaning & preparation of surface complete all as specified as shown in drawing as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: Removing of existing broken rear legs of chair DINING long back and S&F of new 1st class hard wood MP Teak legs of size as shown on drawing and as directed by Engr-in-Charge.

FD-357: CHAIR DINING LONG BACK: Removing of existing broken stiffner of chair DINING long back and S&F of new 1st class hard wood MP Teak stiffner of size as shown on drawing and as directed by Engr-in-Charge.

DB-10 & FD-243: TABLE 3' x 2' : S & F in replacement of top 18mm thick pre-laminated particle board of size as shown on drawing with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

DB-10 & FD-243: TABLE 3' x 2' : S & F in replacement of leg made out of Ist class hard wood MP Teak MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

DB-10 & FD-243: TABLE 3' x 2' : S & F in replacement of top side rail of Ist class hard wood MP Teak MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

DB-10 & FD-243: TABLE 3' x 2' : M&L French Polishing to Table of any description width of girth including cleaning and preparation of the surface complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD/MAP-II/02: SOFA SET FIVE SEATER CUSHIONED: S & F in replacement of arm made out of Ist class hard wood MP Teak MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD/MAP-II/02: SOFA SET FIVE SEATER CUSHIONED: S & F in replacement of front leg made out of Ist class hard wood MP Teak MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in Charge.

FD/MAP-II/02: SOFA SET FIVE SEATER CUSHIONED: S & F in replacement of rear leg made out of Ist class hard wood MP Teak MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD/MAP-II/02: SOFA SET FIVE SEATER CUSHIONED: S & F in replacement of front long rail of three seater made out of Ist class hard wood MP Teak MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD/MAP-II/02: SOFA SET FIVE SEATER CUSHIONED: S & F in replacement of front long rail of single seater made out of Ist class hard wood MP Teak MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.

FD/MAP-II/02: SOFA SET FIVE SEATER CUSHIONED: S & F in replacement of foam 40 density 100 mm thick and including covering with tapestry cloth not less than Rs. 350/- per Mtr of width 1.2 mtr complete all as per drawing and as directed by Engr-in-Charge.

FD/MAP-II/02: SOFA SET FIVE SEATER CUSHIONED: S & F in replacement of tapestry cloth not less than Rs. 350/- per metre of width 1.2 Mtr complete all as per drawing and as directed.

FD/MAP-II/02: SOFA SET FIVE SEATER CUSHIONED: M&L French Polishing to Sofa set Five Seater of any description width of girth including cleaning and preparation of the surface to match with the existing complete all as specified, as shown on drawing and as directed by Engr-in-Charge.

Archana Construction

Shubhi Enterprises