Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC 27 2ND FLOOR CITY CENTRE CLUB ROAD RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹28.9 L+₹1.9 L (7.07%)Rejected-Finance | L2 | Rejected-Finance Quoted amount is more than L1 | |
| 3 | L3₹29.4 L+₹2.4 L (8.89%)Rejected-Finance 20 23 MANASKAMANA ROAD BANSBARI MORE PS ENGLISHBAZAR DT MALDA | ENGLISHBAZAR | MALDA | WEST BENGAL | 732101 | L3 | Rejected-Finance Quoted amount is more than L1 |
Tender Value
₹26.3 L
EMD Value
₹52,600
Closing Date
23 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S Rakesh
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
SRWTO BNO T97 INLPTWY HSTDING INTHE BCPLX SPLREPTO BNO T101 N ADNALTN TLETBLOK OF CPLEX ADJACENT TO ELINES MBADIPOCKETN P OF 02 CMCAL DPUMP WITH DOSING SYS AWITH CMICAL ANLYSR CHLORIN TSTING KIT N CONCTD ITMS EXTRNL WSPPLY INSLN NAMKUM KTOLI GERANCHI
2023_MES_591739_1
8200/1475/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class D Cat a (i) and (ii)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹52,600
Yes
13 Jun 2023
27 Apr 2023
25 May 2023
28 Apr 2023
23 May 2023
10 May 2023
Amount
Dismantling Asbestos cement 6mm thick (corrugated, semi corrugated, etc.) sheets in roof coverings including ridge.
S&F Pre-painted galvalum alm zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws as specified and directed
Dismantling timber scantling 40 sqcm and over in section in any position as in unframed work .
M&L 2nd class hard wood clean swan in scantlings fixed.
All as per item Ser No 05 above but except timber
S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirmig to Fe-410-W (Gde-E-250) quality A
Dismantling of wall and ceiling board any thickness/description including cover fillet complete all as specified and as directed.
M&L for 4mm plain non Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws
M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter. .
M&L for 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping.
M&L in repairs 2nd class hard wood plain fillets, square, rectangular or triangular in section of sectional area exc 13 sqcm & n.exc 25 sq.cm wrought , secured with nails or brads,
All as per item Ser No 14 above, but sectional area not exc 3 sq.cm
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site .
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site .
S & F for 2nd class hard wood (SAL) plain solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fitted to chowkats .
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.
S&F 4.8mm thickness Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane
All as per item Ser No 23 above,but figured glass pin headed type n.exc 0.50 sqm each complete all as specified and directed
Solar control film 50 micron reflective type
S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples.
S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a)
M&L for factory made 2nd class hardwood 35mm plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers.
S&F 2nd class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats
S & F 100 mm Butt hinges medium weight medium cold rolled mild steel .
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed
S&F of 150 mm size aluminium handles cast type anodised.
S&F 100 mm Haps & staples safety type aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screwscomplete all as specified and directed.
S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F as in hold fasts; conforming to Fe -290 Gde E-165 complete.
Cutting holes in, brick walls in cement mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 exc half brick but n exc. One brick.
M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate for fixing of hold fast and making good .
Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.
M&L, 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes .
M&L vitrified tiles of any colour/shade 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles .
All as per item Ser No 40 above, but on vertical surfaces.
M&L coloured/ printed non-skid joint free ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match .
M & L 10mm thick rendering as backing coat in cement mortar 1:4 on fair faces of brick work or concrete vertical surface to receive wall tiles.
M&L coloured glazed ceramic tiles in vertical surface 350x250x7mm/450x350xx7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces
M&L coloured glazed ceramic tiles in vertical surface 200x300x7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces.
Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thickness (below or above ground level)
M & L 100mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate
M&L 75 mm thick plain cement concrete type C-2 , 1:3:6 (40mm graded aggregate) as in plinth protection making surfaces even and fair complete all as specified and directed.
M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including circular cutting,chamfering of edges as required.
M&L treating the surface with beeswax polishing by machine to existing kota stone flooring.
M&L 18 to 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required.
M&L, 20mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even.
M&L Chequered cement concrete tiles with rubberise moulded (30x30x25)mm thick, set, jointed and pointed in neat grey cement slurry in floors with grey pigment cement and pigments.
M&L machine pressed precast cement concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid over sand cushioning
M &L Sand filling under floors or in foundations including watering and consolidation
Demolition of cement concrete (reinforcement) any description and positin not other wise specifically.
M & L RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc.
Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or slopeing) rough finished complete.
M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to.
Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match Type B1 1:2:4 (20mm graded aggregate) set in CM 1:4.
Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measur ed separately and paid for under above item Type B0 1:2:4 (12.5mm graded aggregate) set in CM 1:4..
S&F 20mm dia Aluminium powder coated as in golden colour finish draft rod complete all as specified and directed.
S&F Harrision rails , mild steel of anodised alloy with fixing brackets , stops, rollers etc.
S&F brass chromium plated decorative bracket fixed to wall .
S&F floor door stopper 150 mm of brass body and tongue anodised with hard drawn steel spring fixed .
All as per item Ser No 65 above ,but fixed in repairs
Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc
M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.
M&L for half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc .
M&L for rendering 15 mm thick on fair faces of brick work / Concrete /stone surfaces in cement mortar (1:6) making finished even & smooth without using extra cement .
M&L for rendering 15 mm thick on fair faces of brick work / Concrete /stone surfaces in cement mortar (1:4) making finished even & smooth without using extra cement using WPC (WPC will be measured separately).
Supply only integral waterproofing compound.
S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste incl cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm.
S&F Glass shelf of size 500mmX125mm consisting sheet glass with CP brackets and CP frame Size 500mm long complete all as specified and directed.
Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth.
Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site.
S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.
Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site .
S & F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.
Dismantling water tanks Capacity in Exc 250 & n exc 500 litres and removing to store
Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store
S & F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I
S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I
S&F in repair 20mm bore PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule .
S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 25 mm bore pipe
S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe.
Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)
S&F 125mm dia eaves gutters and rainwater pipes of 1mm thickness (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including
S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors
S&F PVC bends any radius 100 mm dia
S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing complete all as specified and as directed.
S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor complete all as specified and as directed.
S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.
Supply and fix PVC connections 15 mm size with PTMT nuts of length 900mm.
S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.
S&F in repairs Chromium plated toilet paper holder with flap of standard size as approved by GE.
S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed.
S&F in repair 32mm flexible pipe for urinals and wash basin.
S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)
S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.
S&F Chromium plated 600mm long towel rail with brakets as approved by EIC.
S&F in repair white EWC sheet cover complete all as specified and directed.
S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in complete all as specified and directed.
M&L in repairs of Cast iron Nahani trap , Diameter of outlet in 100 mm with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4).
S & F in repair PVC cabinet looking mirror box type of size 355 x 455 mm all as directed by EIC (prayag or equivalent)
S&F in repair stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces .
S&F Towel ring, square type including CP screws complete all as specified and directed.
S&F towel ring square with round flange.
S & F 15 mm bore two way long body bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S&F CP soap tray fixed with rawl plugs complete all as specified and directed.
S&F PVC door bottom weather strip door brush sweep seal .
S&F in repair brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality.
S&F in repair brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality.
M&L preparation of new plasterd wall surface sand applying two coat of oil bound distemper of approved colour and shade over one coat putty .
M&L preparation of new plasterd wall surfaces and applying two coat of cement based paint of approved colour and shade
M&L preparation on new wooden surfaces of any description not otherwise described over 10 CM width or girth and applying two coat of synthetic enamel paint of approved colour and shade over pink primer.
M&L preparation on new steel surfaces of any description not otherwise described over 10 CM width or girth and applying two coat of synthetic enamel paint of approved colour and shade over red oxide zinc chrome primer.
M&L preparation of existing old wall/ ceiling surfaces and applying finishing walls with Acrylic smooth exterior paint of required shade; New work (two or more coats applied @ 3.28 ltr 10 Sqm) over and incl priming coat of exterior primer applied @ 2.20Kg/ 10 Sqm.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, incl Nanital or similar pattern roof covering.
Dismantling structual steel work including doors, gates but excluding framed truss etc
S&F Powder coated GI frame work for false ceiling of size of grid 605 x 605mm (consisting of angle or tee section size 24 x 24 x 1.5mm thick angle section and 24 x 32 x 1.5 mm Tee Section) Powder coated GI snap grid hanging with 02 mm dia GI hanger/wire fixed with steel dashed fastners complete.
M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished fair & even complete all as specified and directed.
M&L preparation newly plastered surface for applying two coats of distemper oil emulsion over a coat of 1mm thick plaster of paris putty applying on existing surface for even and smooth
M & L preparation of existing surface of wall and applying one coat of cement base paint, in any colour complete.
Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work complete all as specified and directed.
M &L for RCC M-25 (20 mm graded aggregate) for slab supported on walls, beam and column etc complete all as specified and diected.
M&L for 75mm thick PCC type D2, 1:4:8 (using 40mm graded stone agg) as in sub base floor surface complete.
M&L Non - skid Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete.
M&L for Chequered cement concrete tiles (20x20x25)mm thick, set, jointed and pointed in neat grey cement slurry in floors
M & L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete.
Taking down chowkhat with shutter exc 1.5 Sqm but n exc 4 sqm each (without taking off shuter from frame
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg.
S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing.
S & F 75mm Butt hinges extrucded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21.
S&F of 100 mm size aluminium handles cast type anodised.
S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete.
S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm bore pipe.
S&F PVC (SWR) pipes 75 mm single socketed in any length with rubberring joints, laid in trenches or in floors
S&F PVC bends any radius 110 mm dia
S&F PVC bends any radius 75 mm dia
S&F PVC vent cowl any radius 75 mm dia
Demolition and breaking up drain pipes internal dia of pipe in 150 mm (salt glazed ware, AC or Reinfoced concrete) set in cement motor.
M&L PCC (1:3:6) type C-2 concrete bed to drain pipe including forming cradles in against the side or pipe after they are laid and tested for 150 mm dia pipe.
M&L for 150mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel for 150 mm dia (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required.
S&Fix in repairs Vitreous China bowl urinal half stall type, white with grating and union for discharge pipe type complete including providing and fixing plugs complete.
S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe
S&F 10 ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket.
S & Fix in repair 15 mm bore pillar taps taps, chromium plated cast copper alloy fancy type, screwed down high pressure, with long shanks and fly nuts , screwed for iron pipe .
S & Fix in repair 15 mm bore stop valves , chromium plated cast copper alloy fancy type, screwed both ends for iron pipe or for union and fixed.
S&F 32 mm dia waste/flush pipe for urinal and WHB complete.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)complete.
M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete.
M & L preparation of new surface of wall and applying two coat of white wash complete.
M & L preparation of new surface of ceiling and applying three coat of white wash complete.
Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.
M & L Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (Note- Modular cover plate of any module with all fittings are included in point wiring.)
One light point controlled by one, one way switch 5 Amps
One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
One bell point controlled by one, bell switch 5 Amps
One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.
Description all as per item No 159 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
S & F Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified and directed.
S & F Modular Switch piano flush type, single pole, one way, and 15/16 Amp single modulecomplete all as specified and directed.
S & F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.
S & F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.
S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.
S & F Bell push modular 6 Amps single module complete all as specified and directed.
Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed
S & F Lamp holder, PVC body suitable for batten fitting with LED bulb 9 W of Make : Havells, HPL, Bajaj complete all as specified and directed.
S & F Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make :-Philips, Havells, Crompton
S & F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provision of LED bulb 10/11 watts complete all as specified and as directed. Make- Havells, Philips, Bajaj.
S & F LED 10 watts batten aluminium extruded (mirror light) with decorative end caps complete all as specified and as directed. Make- Bajaj, Havells, Philips.
S & F metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed.
M & L earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
Supply and fix Reciprocating pump chemical feeder for injecting calcium hypochlorite employing motor driven high pressure single head adjustable reciprocating chemical dosing pump (Decrin dosing pump model 96NGQ51) of capacity 2 US GPD to 40 US GPD at 100 PSI with accessories Lead tubing, connecting nuts, injection check valve, clay weight, ferrules, liquid end of dosing pump including accessories be non metalic complete all as specified and directed.
Supply and fix (dosing sysem ) FRP solution preparation cum settling tank hopper bottom 100 Ltrs capacity with lid, inlet/outlet /drain connection, level gauge , sludge collection facility, port hole and fitted with electric speed reducing motor and SS-316 agitator with shaft and blade in plastic -mounted on tank to maintain uniform suspension throughout the tank, complete all as specified and directed. Note : - (a) Lid must have port hole for pouring calciun hypochlorite and water when necessary and provison for mounting dosing pump on the lid/wall.
Supply and installation of chemical analyser chlorine testing kit to analysis doze of presence of free residual chlorine in water comprising of test tube set, peppet measuring flask, dozing dropper, comparing chart to identify percentage level of free residual chlorine. alongwith reagent
S&F GI Tubing medium grade ISI marked including all fittings laid in trenches/fixed on wall of size 15mm bore complete all as specified and directed.
All as per item Srl No. 178 above but of 20 mm dia .
All as per item Srl No. 178 above but of 25 mm dia.
S & F gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 15 mm bore. Make : Shakti/Leader/Vardhman/BIR Jalandhar.
All as per item Srl No. 181 above but of size 20 mm bore.
All as per item Srl No. 181 above but of size 25 mm bore.
M & L Point wiring using approved colour coding as per IS, with multistranded copper conductor for one three pin socket outlet 15 Amp independent with cable 4 sqmm FRLS cable PVC insulated unsheathed 1100 volts grade including necessary running of 2.5 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly all as specified and directed for the following :- Note : Contractor should make good even distributed wall/surface as before.
S&F switch socket combination 2 in 1, 3 pin, 15 amp multipurpose, flush type, all as specified and as directed
Associated Engineers
M/s Mukesh and company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .