Delhi Village Development Board work in NCT of Delhi.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kinds of soil.

Supply of building Rubbish/Malba/similar unserviceable material dimantled or waste material by mechanical transport including royalty loading unloading banking the same in layers not exceeding 20cm in depth, braking clods watering rolling each layer with 1/2 tonne roller or wooden or steel rammers and up to embankments for roads, flood banks, marginal banks and fluid or filling up ground depression, with all leads & all lifts.

Supply of earth including excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions by mechanical transport within 10 km. lead and lift upto 1.5m. including royalty.

Providing & fixing of precast boundary wall with clear height of 2000 mm, consisting of concrete post of Size 230mmX230mmX(3000 + 380) mm having two grooves of size 60 x 110mm so as to receive precast Boundary Wall of Panel size 2990x2000x100mm reinforced With 8mm Dia TMT BArs @250mm C/c. The post shall be grouted in Precast Concrete Footing of Size 500mmx710mmx710mm reinforced with 4 nos 10mm dia Tmt Bars and 6mm dia tmt rings @ 200 mm c/c. All Precast elements shall be manufactured in M25 Grade ncrete. A Cast-In-Situ Beam shall be casted in betweeen the Columns of Size: 2880mmX225mmX225mm with horizontal 4No.s 10mm dia tmt bars and 6mm Rings @ 200mm c/c. The Item include the excavation of earth pit of 1600mm depth , pouring of concrete of nominal mix 1:2:4(PCC) beneath Precast Fottings, fixing post concrete post int it plumb, line and level and fixing of precast panel between post as per drawing. The post to be erected @ 3.10 m. centre to centre. Rate includes all loading, unloading, shifting all leads and lifts complete in all respect to the satisfaction of Engineer in Charge.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power rollerto achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-III (size range 26.5mm to 0.075 mm ) having CBR Value-20

Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with linding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Supplying, installation, testing and commissioning of 40 watts smart integrated solar light of Highly efficient IP65 LED solar lightning system with built-in high efficiency solar panel, LED Light and long-life PO4 battery with high efficiency microprocessor-based charge controller, p/r motion sensor and compact in size to be mount on pole top complete etc. as required (Make:- Bajaj, Havells, Helonix, Phillips, Crompton, Orient or equivalent ).

Supplying and fixing chair bench manufactured by the agency “KONKRETE PRODUCTS CO.” by using reinforced RMC of M-30 grade using vibro compaction process with back rest in decorative finish consisting of 2 number L-shape base support in grey cement color (100 mm thick, 1000 mm back height, 450 mm front height, 620 mm base width) and 5 number reinforced cement concrete planks in terrazzo finish of size 1500 mm x 100mm x 50 mm and 1 number of reinforced cement concrete plank in terrazzo finish of size 1500 mm x 200 mm x 50 mm having overall dimensions 1500 mm seating length, 450 mm seating height and 1000 mm total height. All parts are joined together galvanized nuts & bolts of suitable size and all bolts are sealed after assembly. All as per approved make, design and pattern including loading, carriage, unloading, stacking, placing at position and fixing at site with all leads.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @3% by SUB HEAD : 16- ROAD WORK 1064 weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge.

Providing and Displaying Mascarena palm well developed with resh & healthy foliage leaves 150 to 180 cm ht in 35 cm Cement Pot as per direction of the officer-in-charge.

Providing and Displaying Topiary plant of Ficus Nuda well eveloped with fresh & healthy foliage from Top to Bottom with single piller 75 to 90 cm spread, 195 to 210 cm ht. in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe.

Please Enable Macros to View BoQ information