Facade Restoration of Poonch Fort Poonch Fort,Tehsil Haveli,District Poonch.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

De-vegetation of plants of girth of not exceeding 225 mm from monument/structure by removing bushes, trees including complete uprooting from the wall & roofs/structures carefully including suitable chemical treatment to roots to avoid further growth including disposal of rubbish to nearest Municipal dumping ground. Lead as per direction of Engineer incharge.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in: Lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 fine sand)

Extra for tile bricks masonry with common burnt clay tile bricks in superstructure above plinth level upto floor five level.

Extra for tile brick masonry with common burnt clay tile bricks curved on plan upto a mean radius not exceeding 6 meters.

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with: Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand).1st Sort

Extra for coursed rubble masonry with hard stone (First or second sort) in : Circular pillars

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First Class deodar wood

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class deodar wood.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Sal wood

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. Screws.1st class deodar wood

Providing and fixing plained eaves boarding. 2nd class Deodar wood.250x32 mm (nominal size)

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 150x10 mm

Providing and fixing bright finished brass handles with screws etc. complete :100 mm

Providing and laying in situ five course water proofing treatment with APP (Atactic Poly Propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film, 5th top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 Fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Providing and laying common burnt clay (non modular) brick tiles of class designation 10 over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc.including dismembering and stacking within 50 meters lead.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Lime plaster 15 to 40 MM thickness on flat wall/vertical surfaces Providing and application of lime - surkhi Plaster 1:1 (1 slaked Lime: 1 surkhi) on wall surfaces of thickness between 15 to 40 MM including organic additives like sugarcane molasses, extracts of beil,maithi, etc. as per traditional practices. The preparation of mortar is to be done following traditional practice includes using chakki/garat (wet grinding of lime and sand by heavy stone mill / chakki/garat), application of mortar in 3 layers with last layer of 6 MM thick, with a gap of minimum 3 days and not more than 10 days from previous layer. The item rate includes application of Loi, tampering, beating, reworking of plaster till the shrinkage cracks disappear and desired finish achieved and curing for 10 days. Item also includes all lead and lift, establishing work yard / chakki etc. tools implements etc. as required on site.

Lime plaster 5 to 10 MM thickness on ceiling and curved surfaces. Providing and application of Lime - surkhi Plaster 1:1 (1 slaked Lime: 1 surkhi) on wall surfaces of thickness between 5 to 10 MM including organic additives like sugarcane molasses,extracts of beil, maithi, ete as per traditional practices. The preparation of mortar is to be done following traditional practice includes using chakki/garat (wet grinding of lime and sand by heavy stone mill / chakki/garat), application of mortar in single layers, with a gap of minimum 3 days and not more than 10 days from previous layer. The item rate includes application ofLoi, tampering, beating, reworking of plaster till the shrinkage cracks disappear and desired finish achieved and curing for 10 days. Item also includes all lead and lift, establishing work yard / chakki, scaffolding, formwork tools and implements etc.

Decorative/ Ornamental plaster plaster work in lime surkhi mortar (1:2) as per traditional practice and design,The preparation of mortar is to be done following traditional practice includes using chakki/garat (wet grinding of lime and sand by heavy stone mill / chakki/garat). The thickness varying from 10mm to 100mm as per design, as directed by Engineer incharge/ Consultants, and including all leads, lifts; and carriage. All complete.

Providing and applying lime Kara 1:1 (1 lime : 1 zikka powder ) grinding or with grinding mill/ mannually on lime base on flat surface in two coats , first coat applying 3mm to 4mm thick and curing properly at least 7 days and finishing coat done after 7 days of previous coat as per traditional Practise (thickness not more than 6mm.) Notes: -Zikki powder shall be free of any impurities, lumps, etc. -The preparation is to be done following traditional practice includes using chakki/ garat (wet grinding of lime and Zikki powder by heavy stone mill / chakki/garat) -Only Fat Lime / non hydraulic shall be used and should be free of any impurities. -Final layer of Kara shall be cured and traditional process of rubbing & polishing shall be done by expert craftsman till desired finish is not achieved on the surface. -Post application, surface shall be free from any kind of hairline cracks, undulations, patchy finish. -Finished surface shall be free from any powder / chalk on the surface.

Providing and applying lime Kara 1:1 (1 lime : 1 zikka powder ) grinding or with grinding mill/ mannually on lime base on ceilling and all curved surface in two coats , first coat applying 3mm to 4mm thick and curing properly at least 7 days and finishing coat done after 7 days of previous coat as per traditional Practise (thickness not more than 6mm.). Notes: -Zikki powder shall be free of any impurities, lumps, etc. -The preparation is to be done following traditional practice includes using chakki/ garat (wet grinding of lime and Zikki powder by heavy stone mill / chakki/garat) -Only Fat Lime / non hydraulic shall be used and should be free of any impurities. -Final layer of Kara shall be cured and traditional process of rubbing & polishing shall be done by expert craftsman till desired finish is not achieved on the surface. -Post application, surface shall be free from any kind of hairline cracks, undulations, patchy finish. -Finished surface shall be free from any powder / chalk on the surface.

Providing lime kara on decorative/ornamental surfaces/stucco or embellishments as per decorative /ornamental designs as per old existing carving on surface highly precise. Providing and applying lime Kara 1:1 (1 lime : 1 zikka powder ) grinding or with grinding mill/ mannually on lime base in two coats on decorative ornamental surfaces , first coat applying 3mm to 4mm thick and curing properly at least 7 days and finishing coat done after 7 days of previous coat as per traditional Practise thickness not more than 6mm.

Raking out joints of stone masonry surface to the required width and depth, with due care and precaution by mechanical/manual means including preparing and cleaning the surface for re-pointing / refilling of joints, including disposal of rubbish to the dumping ground within 50 mtrs lead.

Ruled/ Flush pointing on Red sand stone masonry surface with lime,surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved except scaffolding)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc.wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.NOTE:- To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done

Making cornice band with ornamental design as per the existing design with lime plaster 1:3 (1 lime putty : 3 fine sand)6.5.1 Size 150 mm wide and 50 mm average thickness

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified,comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.30.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Providing and fixing inagurataion stone of granite(Size 3'-0"x2'-0") incl.engraving writing and fixing in wall including construction ofPedestal complete job

Providing and fixing of MS Steel with MS Sheet including writing and fixing in wall including construction of Pedestal complete job

Carriage of material by M.T incl loading/unloading & stacking complete

Limeavg. lead 233 Km by MT

Sand/Stone agg. below 40 mm nominal size avg. lead 233 Km by MT

Brick Tile avg. lead 233 Km by MT

C.G.I.Sheets avg. lead 233 Km by MT

Stone Rubble Masonary avg. lead 233 Km by MT

Dismanttelled Material and Debris/Plaster avg. lead 05 Km by MT