Supply and Installation of decorative pole on road no. 01 at Sandila Phase-1 (Balance Road) Distt. Hardoi.

Supply & Fixing of Decorative pole made of mild steel with a total height of 7 mtr. Above ground level with Single arm braket for S.L. and predefined laser cut pattern in the top portion o the braket of the pole. Pole bottom base section shall be 250x1500 mm 4mm thickness column with two side predesigned laser cut to illuminate the surrounding in 20W with UPSIDA Logo naticeable mode, between section pole of 90x4500x3.2mm then 76x1000x3mm top braket with illuminated laser cut pattern design one of 1000mm to bold the S.L. as per shared drawing. the base plate of pole shall be of sixze 400x400x12mm. provision for inside termination box with for away connector & lons 6 Amps MCB for local isolation. The pole is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized powder coat and cured. The decorative pole is suitable for outdoor lighting application. pole ligh is complete in all aspects with all accessories with foundation bolts. as per AOR Attached with 03 year maintenance & warranty on manufacturing. Technical specifications to be approved by E/I

Supply and Fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suittable for 52 watt to 72 watt confirming to IP 66 protection complete in all respect as per UPPWD 1422 CAT-AA make Philips/Bajaj/Cromptom/Wipro.

Suppy & Fixing of 05 Amp to 6.0 Amp SP MCB in m S Box complete in all respect (Cat B) as per UPPWD Sch item no. 1001

Supply & laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in ground as required aspects as per UPPWD Sch no. 716

S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701

Supply and burying of 600mm x 600mm x 6mm G.I. plate veritically for earthing with its top at least 3 meters below ground levl complete with 20mm dia G.I. pipe and funnel for watering and earthing lead of one no. 8 to 10 SWG GI wire in 15 mm dia GI pipe up to switch board (from appron to switch board the cost of G.I. pipe and GI wire will be estra) 30cm square C.I. frame with hinged cover masonry housing alternate layerss of Charcoal/coke and salt at least 150 mm thick alround etc. as per directionns of engineers-in-charges complete in all respects as per drawing (This will apply for earthing of poles also)

Supply & laying of 63mm dia DWC HDPE pipe ISI marked along with all accesscries like socket, bend, couple etc. Confirming in IS 14930 part-II complete with fitting anf cutting jointing etc. througth horizental bering trenchless (75 cm below ground level) including excavation and refilling the trench but excluding and curhioning and proractive etc. complete in all respect.

Supply and wiring of sub main with 03 nos.of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I (20 mtr Each Pole )

Supply and laying of 10 sq.mm 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie)..over a cushion of 75 mm. thick sand all around and protected. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.OEM must have it's own in house NABL accrediated Laboratory for testing procedure. All Material as per Technical specificition pre approved by Engineer in charge.( Polycab, Havells, Grandlay, Gloster, KEI make) (Cable laid in Ex. DWC Pipe) (as per UPPWD approved make list)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.T&P. 63 mm dia (OD-63 mm & ID-51 mm nominal) (as per UPPWD approved make list)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN (as per UPPWD approved make list)

S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated, underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer- incharge as per UPPWD sch. no. 503 (b) 25 sq. mm 3.5 core

Supply and laying of 25 sq.mm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie)..over a cushion of 75 mm. thick sand all around and protected. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.OEM must have it's own in house NABL accrediated Laboratory for testing procedure. All Material as per Technical specificition pre approved by Engineer in charge. ( Polycab, Havells, Grandlay, Gloster, KEI make) (Cable laid in Ex. DWC Pipe) (as per UPPWD approved make list)