CA NO. CWE/KAS-38/2023-24 REPAIR AND MAINT OF TOILETS, FLOORING, JOINERY, SANITARY FITTING, PVC DOORS AND CONNECTED B/R WORKS OF MD AND OTM ACCN AT MIL STN KASAULI UNDER GE KASAULI

Amount

Dismantling timber scantlings in unframed works 40sq. cm and over in section, in any position complete all as specified and directed.

Material & labour for rolled mild steel section Fe 410-W (Gde E- 250) quality A as in roof trusses (framed), trusses, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats gusset plate etc.complete all as specified and directed.

Material & labour for steel work in tubular trusses ,purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified, including dismentling Plain or corrugated steel sheeting, any gauge,thickness and any pattern complete all as specified and directed.

Supply and fixing for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified , including dismentling Plain steel sheeting, any gauge,thickness and any pattern complete all as specified and directed.

Supply and fixing for fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed, including Dismentling corrugated steel sheeting, any gauge,thickness and any pattern complete all as specified and directed.

Material & labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall ,parapet wall etc complete all as specified and directed, including demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

All as per item No.7 abve but except stone , including demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

Material & labour for Brick work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 , including Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

Supply and fixing coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified, including dismantling existing wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material & labour for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed, including dismantling floor tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material & labour for vetrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 20 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) all as specified and directed, including dismantling floor tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Supply and fix 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed, including, dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material & labour for coloured prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified, including dismantling floor tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material & labour for PCC 75mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

Material & labour for 75 mm thick Plain Cement Concrete (1:3:6) type C-2 using 40 mm graded stone aggregate laid in panels in plinth protection, even & fair surfaces without using extra cement all as specified.

Demolition of reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified and directed.

Material and labour for providing Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, bressummers, complete all as specified and directed. Note : (Reinforce bar paid and measured separately)

Material and labour for providing pre cast cement concrete type B1 1:2:4(20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. , with plain fair faces, including hamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete complete all as specified and directed.

Material & labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed .

Material & labour for rendering 15mm thick in cement plaster 1:4 on Brick work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed, including Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed..

Material & labour for two coat cement plaster (up to 12m height including necessary scaffolding) ,on brick/concrete surace of wall first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement. (WPC will be paid seperately under respective item) , including taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Supply only WPC complete all as specified and directed.

Material and labour for rendering 20mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even fair without using extra cement complete all as specified , including taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material & labour for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified and directed.

Material & labour for preparation of new wall surface applying two coats of oil bound distemper on wall over a coat of 2mm thick wall care putty over coat of chalk whiting primer on plastered surfaces, preparatory to distempering complete all as specified and directed.

Taking down chowkats or frames without taking down shutters from the frame exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified and directed.

Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed.

Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified and directed.

Taking down shutter of any description n. exc 1.0 sq.m each complete all as specified and directed.

Taking down and refixing in same location after making necessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed .

Supply and fix IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fix 35mm thick, 2nd class HW, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Supply and fixing IInd Class HW 35mm thick, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified and directed.

Supply and fixing 30mm thick 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and as directed .

Supply and fixing solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification complete all as specified and as directed .

Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded premale PVC sheet on the front face & 4mm thick prelam PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge.

Material and labour for anodised aluminium frame powder coated(50micron) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. Note: Hinges shutters and lugs shall be measured and paid for separately.

Supply and fixing anodised aluminium powder coating of any colour (thickness of powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, hinges anodised aluminum snap beading screws etc, complete all as specified and directed. Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately under this Sch.

Supply and fixing anodised aluminium powder coated (thickness of powder coating not less than 50 micron) three track sliding window/Cupboard frame of size 45.2 x 35 x 1.3mm and window/Cupboard shutter of size 37.5 x 15 x 1.6mm with one or more rebates including joining cleat for fixing and self locking devices of approved quality in each shutter, handles etc complete all as specified and directed. Note: Quoted rates deemed to be included for self locking devices

Supply and fixing anodised aluminium powder coated (Powder coating shall be 50 micron minimum thickness) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately

Supply and fixing Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair welded steel wire fabric(weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and directed

Material and Labour for preparing new or previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Material & labour for 9mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination ,fixed with aluminium frame work complete all as specified and directed.

Supply and fixing sheet glass 5.5 mm thick glass plain sheet ordinary quality in square exc 0.5 sq. m in each pane to be fixed in aluminum frame complete all as specified and directed.

Supply and fixing sheet glass 4 mm thick plain sheet ordinary quality to be fixed in aluminum frame complete all as specified and directed.

Supply and fixing Mortice lock, 4 levers, brass, vertical type of size 100mm, fixed in repair complete all as specified and directed.

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fixing for stainless steel butt hinge ISI Marked 75mm size complete all as specified and as directed.

Supply and fixing 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified in IS No 204-1991 and as directed .

Supply and fixing Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor as in repair complete all as specified and as directed.

Supply and fixing 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified in IS No 281-1991 and as directed

Supply and fixing 150mm Aluminium handles, cast type, anodised, fixed complete all as specified and directed.

Supply and fixing 100mm Aluminium handles, cast type, anodised, complete all as specified and directed.

Supply and fixing 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified in IS No 452-1973 complete all as specified and directed.

Supply and fixing 3mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified and directed.

Material & labour Seamless calcium silicate ceiling made out of 595 x 595mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) including Demolition of wall ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs blankets any thickness including cover fillets etc. complete all as specified and directed.

Supply and fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

Supply and fixing in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed .

Material & labour plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 6 sq.cm and not exc 13 sq.cm including dismantling unframed fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section complete all as specified and as directed .

Material & labour plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 3 sqcm and n exc 6 sq.cm including dismantling unframed fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section complete all as specified and as directed .

Supply and fixing in repair 18/19 mm thick block boards / veneered particle boards, grade 1 quality, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame-work, including dismantling boarding, any description, fixed any position with nails complete all as specified and directed.

Material and labour for preparing new wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing in repair of 25 mm dia curtain rods, mild steel wall thickness .80mm, powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified and directed.

Supply and fixing in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and incl necessary clamping complete all as specified and directed.

Supply and fixing in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed .

Supply and fixing in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed .

Supply and fixing in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Material & labour for cutting holes into or through walls built in stone walls built in cement mortar or cement lime mortar and walls of cement concrete.Superficial area n.exc 150 Sqcm, complete all as specified and directed.

Supply and fixing in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms) complete all as specified and directed.

Supply and fixing in repair 15mm bore angle cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms) complete all as specified and directed.

Supply and fixing in repair swan neck Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs, complete all as specified and directed.

Supply and fixing in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed .

Supply and fixing in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed .

Material & labour for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 including disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing from site complete all as specified & directed.

Material & labour for rotational moulded polyethylene water storage tanks1000 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 including disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing from site complete all as specified & directed.

Supply and fixing 20 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified and directed

Taking up or down steel water tubing and connections of 15 mm bore fixed in any position complete all as specified & directed

Taking up or down steel water tubing and connections of 20 mm bore fixed in any position complete all as specified & directed.

Material & labour for 15mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .

Refixing15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Material & labour for 20mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed .

Material & labour in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fixing in repair sheet glass self asembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket and guard rail complete all as specified and directed.

Supply and fixing in repair 600mmx450mm bevelled edge mirror of selcted qulaity glass, mounted on 6mm thick AC building board or commerical ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed.

Supply and fixing as in repair Vitreous China pedestal wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed .

Supply and fixing in repair of Mixer 15 mm dia Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repair of Mixer 15 mm dia Brass CP mixer for WHB/sink mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repair of 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

Supply and fixing as in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white including fixing bolts, plastic seat & cover complete all as specified and as directed .

Supply and fixing of Vitreous china squatting pan, "Orissa pattern" of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, complete all as specified and directed.

Supply and fixing as in repair 10 litre PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed .

Supply and fixing in repair 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Supply and fixing of grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm). complete all as specified and directed.

Supply and fixing in repair for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing Stainless steel plate rack of size 24"X36"X10" made of 1 mm thick salem stainless steel sheet grade SS-304 with shelves, hooks and railing to keep plates vertically and horizontally, including necessary fixing arrangement fixed in repair complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution complete all as specified and directed.

Supply and fixing in repair 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

R. P. Suppliers and Construction Co.

Varindera And Varindera Construction

R B TRADERS

Sachdeva Builders

M/S SHANTI SARUP DINESH CHAND