8461REPAIR TO ROOF PLUMBING JOINERY FLOORING PATH AND CONNECTED ITEMS TO CERTAIN BLDG AND INTERNAL ELECTRIFICATION AT MINTSD MD AND OTM ACCN UNDER AGE BR-II OF GE (SOUTH) PUNE

Amount

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old unservicrable AC sheet (corrugated or semi corrugated)/ PVC sheet in roofing including ridges etc complete all as specified & directed.

M&L 6mm thick AC corrugated or semi corrugated sheet in roofs walls etc fixed with 'L' or 'J' type hook bolt including dismantling of old unservicrable AC sheet (corrugated or semi corrugated)/PVC Sheet in roofing including ridges etc complete all asspecified & directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as of roof covering/ridges fixed with self tapping screws including dismantling of old unservicrable existing sheet & ridge etc complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.

M&L for IInd class hard wood clean sawn batten at 30 cm center to center sectional area exc 5 and n.exc 15 Sqcm etc including dismantling of old unserviceable battens for tiles shingles etc of any size including tiling fillets exc. 15 cm spacing etc complete all as specified and directed.

M&L for roof mangalore pattern interlocking tiles at side joints laid dry etc including dismantling of old unserviceable single layer mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed.

All as per item No 07 above but except tiles, complete all as specified and directed.

M & L for ridge tiles or hip tiles suitable for mangalore pattern roofing tiles bedded and jointed in CM (1:6) etc , complete all as specified and directed.

M & L for preparation of surface of wood and wood based materials and applying two coats of creosote oil to new wooden tiles battens of any size & spacing, (measured overall on one side only, spaces not deducted), complete all as specified and as directed .

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.

Fixing only second class hard wood clean swan timber as in scantling, complete all as specified and directed.

Taking down chowkhat or frames wooden / steel exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames wooden / steel n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 3 Nos., MS cold rolld 100mm size butt hinges - 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm with and including MS hold fast - 6 Nos., MS cold rolld 100mm size butt hinges - 06 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drawing given on relavent page of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

S&F 100 mm size mild steel butt hinges medium weight, cold rolled, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200mm legth of excluded section, complete all as specified and directed.

S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F aluminium powder coated two track sliding window with two shutters of 4mm thick frosted/figured glass of modigaurd including good quality of bearing handle, locks, PVC rubber lining etc by using the following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified directed by Engr-in-Charge:- Two track bottom – 20957, two track top / vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip etc by using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified directed by Engr-in-Charge (a) Frame - 20048 (b) Glazing clip - 19352

S&F in repairs aluminium powder coated grill of approved design & pattern, complte all as directed by Engr-in-Charge.

S & F figured glass pin head type, 3mm thick and glazing with oil putty in square n.exc. 0.50 Sqcm in each pane including hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads complete as specified and directed.

S & F aluminium anodised powder coated of ivory/brown colour frame / shutters for windows / doors / ventilator with one or more rebates including joining cleat, glazing clips, anodised aluminium snap beading for fixing, screws, anodised aluminium fittings such as peg stays, handle etc complete all as specified and directed.

S&F aluminium powder coated single leaf door on pivots along with hydraulic door closer door lock, handle, 5mm thick plane sheet glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm thick pre-laminated particle board of required colour as in bottom pannel (Both side laminated) with and including the following sections of by using following aluminium powder coated sections conforming to catalogue of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay complete all as specified directed by Engr-in-Charge. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed, complete all as specified directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or metal frames fixed with putty or fixed with beads and S & F new 4 mm thick sheet glass, ordinary quality and glazing with oil putty/glazing clip in square not exc. 0.50 sqm in each pane ,complete all as specified and as directed.

M&L for prepration of new or previously untreated wooden surface and apply two coats synthetic enamelled paint over one coat of pink primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified directed

M&L for prepration of new or prreviously untreated steel surface and applying two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified directed

M & L for water proofing treatment to sunken slab, walls, etc. shall be carried out as specified below and as directed by Engineer-in-Charge:- (a) Dismantling & remove the existing lean concrete completely and clean the sunken portion of toilet / Baths / WCs / Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor by using polymer modified mortar (“ Dr fixit” Pidicrete URP” or equivalent). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or equivalent. Nahani traps etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or equivalent on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet and applying second coat of the same coating on the angle fillets and allow it to dry completely.

(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or equivalent to be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen, floor, tiling work (floor and dado) to be carried out by using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. Note: Lean concrete 1:5:10 type E-2 shall be measured and paid separately under respective item of BOQ.

M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling sunken portion, complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered etc on sunken floor, complete all as specified and directed.

Dismanling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to MES store yard and rubbish off the premises, complete all as specified and directed.

M & L for non skid joint free ceramic coloured (dark shade) tiles or size 300mm x 300mm x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick Colour (square / rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, as in floors etc. of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete all as specified and as directed.

M & L for glazed colour ceramic tiles of size 300mm x600mm x 7 to 8mm thick as on walls laid over and including 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles etc complete all as specified and directed.

M&L for 25 mm thick concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in floor leveling course etc, complete all as specified and directed.

M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old stone slabs and tiles of any description or thickness

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

M&L for machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM (1:3) including dismantling of old unserviceable stone slabs and tiles of any description or thickness, complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed.

M&L for 75 mm thick PCC type D 2 1:4:8 (using 40mm graded stone aggregate) as in pavement, sub-base and flooring etc.c omplete all as specified and as directed.

M&L chequrred cement concrete tiles 30cm x 30cm x 20mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment laid over and including 20mm thick screed bed in CM (1:4) including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking paver block of glossy finish any shape and size confirming to IS-15658-2006, 60mm thick, M-35 grade with grey cement and no pigment laid over & including 30mm thick stone dust / grit including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and direcetd.

M & L machine cut kota stone slab flooring 20-25 mm thick, laid over and including 20 mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of slab including rubbing and polishing etc complete including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and direcetd.

All as per Ser item No. 55 above but as in riser of steps, skirting, dado and pillars etc complete all as specified and direcetd.

M&L for cement concrete type B1-1:2:4 (20 mm graded stone aggregate) as in coping, coving, edging etc including necessary form work etc complete all as specified and direcetd.

Demolition of cement concrete in any position /any depth, complete all as specified and direcetd by Engr-in-charge.

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:6) on faire faces of brick/concrete surfaces finished even & smoth without using extra cement including taking down cement plaster all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick/concrete surfaces finished even & smoth without using extra cement, complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar, facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:6) on fair faces of brick/concrete surfaces finished even & smoth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on faire faces of brick/concrete surfaces finished even & smoth without using extra cement all as specified and as directed.

Prepration of newly plastered sureface and applying two coat cement base paint complete all as specified and as directed.

Prepration of newly plastered sureface and applying two coat oil bound distemper complete all as specified and as directed.

M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed.

M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed.

M & L for 25 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling of old unserviceable water tanks and removing to store, complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity, tripple layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling of old unserviceable water tanks and removing to store, complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene water storage tank 2000 Litres capacity, tripple layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling of old unserviceable water tanks and removing to store, complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting & fixing in position of capacity n.exc 1000 ltrs, complete all as specified and directed by Engineer-in-Charge.

M & L for water proofing treatment to roof slab, wall, chajjas etc; shall be carried out as specified below including removing of old existing water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust foregin material including flushing at junction of walll and removing the rubbish off the premises to a distance exc 500 m complete all as specified and directed by Engr-in-Charge :- (a) M & L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) M&L for preparing plastered surfaces of roof slab, walls, chajjas etc; by proofing with broom sweeping free from dust etc; evently applying a coat of approved bitumenous primer @ 0.20 Kg/Sqm on all surfaces. (c) M&L for laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.50 Kg/Sqm with laps & overlaps as per manufacturer's instructions or as specified & joints sealed and applied complete by torch application method all as speciifed & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for to check the leakage & seepage and rectifying the same to the entire statisfaction of Engr-in-charge. (d) Finally applying a coat of solar reflective bitumenous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as speicifed & as directed by Engr-in-Charge.

M & L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13sqcm but not exceeding 25 sqcm, complete all as specified and directed.

M & L 18/19 mm thick perlaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard/ Pelmets with teak beading of all sides fixed in repair complete all as specified and directed.

S & F Continuous (piano) hinges 30 mm width of flap, mild steel, bright finish or electro galvanised, complete all as specified and directed.

S & F 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw, complete all as specified and directed.

S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished, complete all as specified and directed.

S & F Magnetic door catches for cupboard/cabinet etc, complete all as specified and directed.

S& F in repair PVC cabinet with looking mirror, single shutter of size 600X450X150mm as per sample of Prayag/Commander make complete all as specified and directed

S&F in repair 15mm bore CP brass long body bib cock, CAT No. MQT 512 of Jaguar or equivalent as mentioned here-in-after, complete all as specified and directed

S&F in repair health faucet with 8mm dia, 1.2mtr ABS CP flexible tube complete all as specified and directed.

M&L for 15 mm bore two way bib tap chromium plated cast copper alloy long body with wall flange complete all as specified and directed

S&F in repairs 2-Way Bib cock with Wall Flange complete all as specified & directed. Make : Jaquar Product code FLR-CHR-5041N or equivalent model in Kohler as approved.

Supply and fix in repairs, stainless steel plate rack of size 36inch x 31inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna) as approved.

S&F in repair 10mm thick corner glass with D bracket, complete all as specified and directed.

S&F in repairs single lever basin mixer without popup waste with 450mm long bbraided hoses complete all as specified and directed. Make : Jaquar Product code ARI-CHR-39001B or equivalent model in Kohler as approved.

S&F in repair Single piece-WC with PP Seat cover, hinges, Fixing Accessories, Accessories set and cistern fittings complete all as specified and as directed. Make : Jaquar of cat no SLS-WHT-6851S110PP or equivalent model in Kohler as approved.

S&F in repairs Hand Shower( Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. Make Jaquar Product code ALD-CHR-577or equivalent model in Kohler as approved by GE.

S&F in repairs CP toilet paper holder confirming to CAT No ACN-WHM-1153S of "Jaquar" or Equivalent make as mentined here-in- after, complete all as specified and directed.

S&F in repairs Soap dish holder confirming to CAT No ACN-WHM-1131N of "Jaquar" or equivalent make as mentined here-in- after, complete all as specified and directed.

S&F in repairs Wall mixer with provision for Overhead Shower with 115mm long Bend pipe on Upperside,Connecting Legs & Wall Flange complete all as specified & directed. Make : Jaquar Product code FLR-CHR-5273UPR or equivalent model in Kohler as approved.

S&F in repairs overhead shower 200x200mm Square Shape Single Flow (ABS Body Chrome plated with Gray face plate) with rubit cleaning system complete all as specified & directed. Make : Jaquar Product code OHS-CHR-35497 or equivalent model in Kohler as approved.

S&F in repairs Counter top basin of Size 610x415x160mm complete all as specified & directed. Make : Jaquar Product code DRS-WHT-37601 or equivalent model in Kohler as approved.

S&F bottle trap (with internal Partition) 32mm size with 250mm & 190mm Long wall connection pipes and wall flange complete all as specified & directed. Make : Jaquar Product code ALM-WHM-769L250x190 or equivalent model in Kohler as approved.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2, laid under floors with necessary socket, elbo & bend etc complete all as directed.

S&F in repairs 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull but gear operated type with bevel gear box and crank handle, complete all as specified and directed by Engr-in-charge.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed by Engr-in-charge.

S&F in repairs Ball bearing suitable for rolling shutters, complete all as specified and directed by Engr-in-charge.

S&F in repairs aluminium powder coated fancy type curtain rod 25 mm bore, medium weight, complete all as specified and directed by Engr-in-charge.

S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

S&F door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) and fixed in repairs, complete all as specified and directed by Engr-in-charge.

S&F in repair brass CP wall mixer Non-telephonic shower arrangement screwed down for iron pipe of bore 15mm of make 'METRO' or equivalent model as mentioned here-in-after, complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore CP bib taps, brass chromium plated, cast copper alloy fancy type handle, screwed down, screwed for iron pipes fixed in repairs, complete all as specified and directed.

S&F in repair brass CP toilet paper holder, complete all as specified and directed.

S&F in repair brass CP towel ring, complete all as specified and directed.

S&F 20mm bore ‘D’ type brass CP tubular towel rail 60 cm long between flanges complete fixed in repairs, complete all as specified and directed.

S&F in repair CP pressure adjustable shower with revolving joint, complete all as specified and directed.

S&F stop valve brass chromium plated, fancy type with long shank and cup (concealed type) fixed to pipe of 15mm bore, complete all as specified and directed.

S&F in repair soap dish, brass chromium plated, complete all as specified and directed.

S&F in repair Health forcet CAT No. 573 of Jaquar or equivalent make as mentioned here-in-after, complete all as specified and directed.

S&F in repair Stop valve brass chromium plated, fancy type, fixed to pipe of 15mm bore, complete all as specified and directed.

S&F in repair stainless steel grating 75 to 100 mm dia suitable for nahani trap, complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door, complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore, complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore, complete all as specified and directed.

M & L for PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP incl 15mm bore pillar tap etc, complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs stainless steel sink 1.00 thick suitable for kitchen or laboratory with plug waste pipe washers including cantilivers cast iron brackets connecting union etc over all size 495mmx420mm with bowl size 410mmx330mmx160mm, complete all as specified and directed.

S&F in repairs stainless steel, sink with drainboard 1 mm thick suitable for kitchen, with plug, waste pipe, washers incl cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size of sink 915 x 460 mm overall and bowl size 410mmx355mmx165mm, complete all as specified and directed.

S & F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe, complete all as specified and directed.

S&F salt grazed stone ware gully traps, square 150x150 size fixed in repairs, complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light etc, including taking down of old unserviceable boarding/ceiling of any description, fixed in any position etc with nails, complete all as specified and directed.

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.

Taking down MCB DB / Main switch, old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm (Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty, PVC casing caping including all accessories etc., heavy duty ISI marked,mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/ sockets, etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- (Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.)

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc.,heavy duty ISI marked,with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coats of anti corrosive paint over of red oxide primer, internally, covered with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches, including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated cable as earth and connecting to earth dolly for 15 amps socket outlet point on independent board complete and including cutting and chases in the wall for box complete all as specified and as directed. (Note :- Making good of disturbed surfaces will be done by contractor without any extra claims.)

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in the existing conduit ,with mild steel concealed sunken boxes with earth dolly with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,sockets,etc including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- (Note :- Making good of disturbed surfaces will be done by contractor without any claims)

One light/fan point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked the existing conduit, with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat red oxid primer with laminated bakelite sheet of minimum thickness of 3mm sheet suitable for switches, including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 Amps socket outlet on independent board complete all as specified and as directed. (Note :- Making good of disturbed surfaces will be done by contractor without any extra claims)

M & L for submain wiring complete with two single core 4 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 4 Sqmm including making good of disturbed surfaces with existing complete all as directed. (Note :- 3 runs of 4 Sqmm conductor and earth wire shall be measured as one unit length.)

M & L for submain wiring complete with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 4 Sqmm including making good of disturbed surfaces with existing complete all as specified and as directed. (Note :- 2 runs of 6 Sqmm conductor and one run of 4 Sqmm earth wire shall be measured as one unit length.)

M & L for submain wiring complete with two single core 10 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 6 Sqmm including making good of disturbed surfaces with existing complete all as directed. (Note :- 2 runs of 10 Sqmm conductor and one run of 6 Sqmm earth wire shall be measured as one unit length)

M&L for point wiring with 1.5 sqmm PVC insulated copper conductor FRLS cable 1100 Volts grade complete with & including PVC casing and caping and accessories with PVC ISI marked switch board, mounted on surface of walls including continuous PVC insulated copper earth wire 1.5 Sqmm connected to common earth dolly, complete all as specified and directed for the following :-

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push

M & L for point wiring with 2.5 Sqmm copper conductor FRLS cable for 15 amps socket outlet point on independent board and continuous PVC insulated copper earth wire 1.5 Sqmm in PVC casing and capping and including PVC mounted switch board complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked with and including heavy duty, PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls /floors / ceiling including all conduit accessories/ fittings/ junction boxes / inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and complete all as specified for the following:- (Note :- Making good of disturbed surfaces will be done by contractor without any extra claims.)

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 2.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls/ floors/ ceiling including all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc, painted with two coats of anti corrosive paint over of red oxide primer, internally, covered PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 amps socket outlet point on independent board (Note :- Making good of disturbed surfaces will be done by contractor without any extra claims)

S&F modular type switch 6A single pole, one way, 240 volts, Cat.No 6730 00 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.

S&F multipurpose socket outlet 16A -2/3 pin,2 module for 230 volts flush type.cat.No 6730 42 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.

S&F modular type switch 16A single pole,one way,1 module, 240 volts,Cat.No 6730 00 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.

S&F modular universal socket 2 module outlet 6 amps 5 pin 230 volts flush type complete all as specified and as directed. (Make-Legrand : "Myrius series" or of equivalent specified here-in-after.)

S&F in replacement of modular ceiling fan step regulator 100W,2module, electronic step type, suitable for fan 48"/56" sweep complete all as specified and as directed. (Make-Legrand,"Myrius series" or of equivalent specified here-in-after)

S & F 240 V, 20 Amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and as directed.

S&F piano type switch 5 amps single pole,240 volts complete all as specified and as directed.

S&F bell push, flush type, 5 amp, 240 volts complete all as specified and as directed.

S&F bell electrical ding dong including hard \ wood board bell push, flush type, 5 amp, 240 volts complete all as specified and as directed.

S&F ceiling rose surface type three terminals, 240 volts complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F piano type switch 15 amps single pole, 240 volts complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb etc. complete all as specified and as directed.

S&F in replacement of ceiling fan regulator two module, electronic step type, delux, suitable for fan 48"/56" sweep complete all as specified and as directed.

S&F bell push, flush type, 5 amp, 240 volts, Modular type complete all as specified and as directed.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm with and including PVC casing caping and making good of disturbed surfaces with existing complete all as directed by Engineer-in-Charge. (Note :- 3 runs of 4 Sqmm conductor and earth wire and 1 run of PVC casing caping shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm with and including PVC casing caping and making good of disturbed surfaces with existing complete all as directed. (Note :- 3 runs of 6 Sqmm conductor and earth wire and 1 run of PVC casing caping shall be measured as one unit length.)

M & L for Sub main wiring complete with four single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with two continuous copper earth conductor of 4 sqmm with and including PVC casing caping & making good of disturbed surfaces with existing complete all as specified and as directed. (Note :- 4 runs of 6 Sqmm copper conductor cable, 2 runs of 4 Sqmm earth wire and 1 run of PVC casing caing shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, FRLS, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm with and including concealed PVC conduit & making good of disturbed surfaces with existing complete all as specified and as directed. (Note :- 2 runs of 6 Sqmm copper conductor cable, 1 runs of 4 Sqmm earth wire and 1 run of PVC conduit shall be measured as one unit length.)

M & L for Sub main wiring complete with four single core 6 sqmm and two core of 4.0 sq.mm earth wire,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor in and including PVC conduit for concealed and making good of disturbed surfaces with existing complete all as specified and as directed. (Note :- 4 runs of 6 Sqmm copper conductor cable, 2 runs of 4 Sqmm earth wire and 1 run of PVC conduit shall be measured as one unit length.)

M&L for cutting chases, pinning in making good to facing where required and poinitng in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good of disturbed surfaces, cutting not exc 10 cm girth all as specified and directed by engineer in charge. (Note : Making good of disturbed surfaces will be done by the contractor without any claims.)

S&F MCB DB TPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted all as directed and specified by Engineer in charge.

S&F MCB DB SPN 8 way, double door, with 200 Amp rated busbar 240 V, recess mounted all as specified and directed by Engineer in charge.

S&F vertical 4 way TPN double door,recess mounted / wall mounted DB incl one number,MCCB as incomer 3 pole and neutral of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory all as specified and directed.

S&F MCB DB SPN 4 way double door with 200 amp rated busbar, 240V recess mounted with common earth dolly all as directed and specified.

S&F MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.

S&F MCB SPN 40-63 amps,10KA, 240V,'C' series complete all as specified and as directed.

S&F MCB TPN 63 amps ,10KA,415 V,'C' series complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 60cm x60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr in deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level including connecting GI earth wire 4mm dia by GI nut, bolt, washers all as shown in electrical plate No. 3 of SSR Part I of 2009 including funnel for watering, PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in pit / chamber, RCC 1:2:4 type B0 using 12.5mm graded stone aggregates and 6mm dia mild steel bars at 100mm c/c as in chamber cover, charcoal, salt etc complete including excavation and earth work in any strata, test point and testing on completion including filling up the earth pit with black cotton soil for best result and removal of excavated material from site all as specified and directed by Engineer-in-charge. (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall bedeemed to be included in quoted rates)

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver, glarefree, smooth light distribution complete all as specified and as directed.

Supply and fixing Integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50/40 mm GI Pipe (including GI pipe) complete with accessories conforming to Cat Part No : HPLLEDSL3060S of HPL or of equivalent in Wipro/phillips/Havells/Fortune Art all as specified here-in-after including taking down old fitting.

Preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs comprising of the following tasks at different locations of any make: (a) Inspection of geyser after opening bottom cover plate. (b) Examine water tightness of storage tank. (c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts. (d) Replace washers and glands of defective taps to ensure water tightness smooth functioning. (e) Inspect vent pipes and remove blockage obstruction if any. (f) Check and correct earth continuity of electrical items. (g) Check and correct temperature setting of thermostats and test its functioning. (h) Checking and adjustments of pressure reducing valves. (i) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked / chocked. (j) Testing of Geysers after repairs/maintenance in all respect for proper functioning. (Note : Spares shall be measured and paid seperately)

Supply & fix thermostat ISI marked suitable for the following capacity Geysers 25 ltrs. to 50 ltrs capacity complete all as specified and as directed.

Supply & fix safety valve/dead weight valve ISI marked suitable for 25 and 50 ltrs. capacity Geysers complete all as specified and as directed.

Supply & fix heating element for 1KW /1.5 KW rating as required at site(any type) including rubber washers (ISI marked) complete all as specified and as directed.

Supply & fix storage inner tank made out of copper sheet suitable for following capacity geysers complete all as specified and as directed :-

Supply & fix apparatus plate for Geyser of 25 to 50 ltrs. Capacity complete all as specified and as directed.

Supply & fix PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 45/60cm long for cold water as per requirement complete all as specified and as directed.

All as per Ser. Item No. 206.00 above but for hot water complete all as specified and as directed.

Supply & fix For unserviceable15A plug top and connection complete all as specified and as directed.

Supply & fix non-return valve 15mm / 20mm dia of brass ISI marked complete all as specified and as directed.

S&F in repairs to Geysers inner water tank of 25 to 50 ltrs. capacity in gas welding / brazing for water tightness and testing complete all as specified and as directed.

Supply & fix indicators of Geysers 25 to 50 ltrs. Capacity(Red/Green/Yellow) complete all as specified and as directed.

Supply & fix gasket rubber ring for Heater plate of any size Geysers complete all as specified and as directed.

Supply & fix inspection cover for outer container of Geysers 25 to 50 ltrs complete all as specified and as directed.

Supply & fix outer container made out of 14 gauge CRCA sheet duly painted for the following :-

Suitable for 25 ltrs. capacity

Suitable for 50 ltrs. capacity

Taking down defective geysers for repair/ painting/ shifting complete all as specified and as directed. (Note :- Repairs will be measured and paid separately under respective Item of Sch)

S&F in repairs cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100V grade from socket / switch to geyser complete all as specified and as directed.

S&F in repairs cable PVC insulated 3 core 4.0 Sqmm with stranded copper conductor 1100V grade complete all as specified and as directed.

S&F PVC rectangular block for mounting, switches, sockets,fan regulator etc with cover laminated sheet cover of size 100mmx100mm and 50mm deep complete all as specified and as directed. (Note :- Making good of disturbed surfaces will be done by contractor without any extra cost)

All as per Ser. Item No. 220.00 above but 175x100x50 mm deep complete all as specified and as directed.

All as per Ser. Item No. 220.00 above but 200x150x50 mm deep complete all as specified and as directed.

All as per Ser. Item No. 220.00 above but 250x200x50 mm deep complete all as specified and as directed.

All as per Ser. Item No. 220.00 above but 350x300x50 mm deep complete all as specified and as directed.

SARATH ENTERPRISES

Suma Construction

M/s.BAJRANG CONSTRUCTION

UNIQUE ENGINEERS