Electrical repairing cum renovation work

Labour charges for dismantling of the existing electrical wiring, DBs, Fittings etc.

Supply & Delivery of 1.1kV grade aluminium armoured PVC/XLPE insulated cable. [Make: Ploycab / Havells / RR Kabel]

4 core 25 sq.mm.

2 core 6 sq.mm.

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Laying of cable as below, after cutting floor/pavement/wall and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish

From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4 core 25 sq.mm.

2 core 6 sq.mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core 25 sq.mm.

2 core 6 sq.mm.

Supplying and fixing 415V, 63A TPN SFU with sheet steel enclosure on flat angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- L&T)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

6 way (Make- Legrand / L&T / Schneider / Seimens )

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

2+10 way (Make- Legrand / Schneider / Seimens)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.

i) 40 A DP (Make- Legrand / Schneider / Seimens)

ii) 63 A FP (Make- Legrand / Schneider / Seimens)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

6-32 A SP MCB (Make- Legrand / Seimens / ABB)

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bars - 415 V, 200 A Dimension of Cu. bars [85mm long]: 4 x 20 x 5mm Dimension of Sheet Metal Box: 500x150mm

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casing-capping and Switch board both on surface]

Average run 8 mtr

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average run 8 mtr

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish.

Average run 9 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.

On Board

Supply and fixing 240V,15 W,Natural White , round panel light (Make:- Philips, Model- Dura Slim or equivalent model of Crompton / Wipro)

Supply and fixing 240V,3 W, Worm White ,round panel light (Make:-Crompton, Model- Star Slim or equivalent model of Havells / Wipro)

Supply and fixing 240V,10 W,Natural White , round panel light (Make:-Philips, Astra Sleek or equivalent model of Crompton / Wipro)

Supply and fixing 240V,12 W,Natural White , round Surface light (Make:-Philips, Model- Full Glow or equivalent model of Crompton/ Wipro)

Supply and fixing of 240V, single head decorative wall bracket light fitting having E27 lamp base (Make- Philips, Muziris Model No. 31425 or equivalent model of Crompton) complete with all accessories and making necy. connections as required incl. S&F 1 no. 18/20 W warm white LED Lamp. (Make- Philips, Model- AceBright or equivalent model of Crompton).

Supply and fixing of 240V, Heritage Lantern type single head wall bracket fitting made of metal with fosted glass having E27 lamp base complete with all accessories and making necy. connections as required incl. S&F 1 no. 18/20 W warm white LED Lamp in the fitting. (Make- Philips / Crompton).

Supply and fixing of 240V, Decorative glass wall bracket fitting having metal base for E27 lamp complete with all accessories and making necy. connections as required incl. S&F 1 no. 18/20 W warm white LED Lamp (Make- Philips/Crompton).

Supply and fixing 240V 12W flexible neck LED Picture / Mirror light fittings on wall incl. making necy. connection as per GS. (Make- Philips, Model No. 31403 Muziris equivalent make of Crompton)

Supply and fixing 240V, 2 W, 4 Module LED Footlight on 4 Modular GI switch board. (Make- Havells Crabtree Athena)

Supply and delivery of 240V,150W LED Flood light luminaire having pressure die cast aluminium housing with IP66 protection, efficacy not less than 120 Lm/W complete with all accessories. (Make-Crompton, Model No. TFS-504-150-57-60D-HL2-GL-NBK or equivalent model of Philips / Surya)

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Supply & Delivery of 250 volt. 4 Ft. Long single LED Tube Light fittings (Make: Philips, Model- TMC 502 1xT-LED 22W or equivalent model of Crompton / Wipro) complete with all accessories incl. 1 no. 18/20 Watt LED Tube light. (Make: Philips, Model- Mas LEDTube 1200mm 18W 865 T8 I – 2100lm or equivalent model of Crompton / Wipro)

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Supply & Delivery of 240V, 50Hz, 1200 mm sweep Decorative A.C Ceiling Fan complete with all accessories (without regulator). [ Make: Orient Electric, Model- Jazz/ Equivalent model of Crompton / Havells]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & delivery of 240V, 50Hz, 450 mm sweep full metal body wall bracket fan complete with all accessories. (Make- Orient Electric, Model- Tornado Wall II-P/C Blk Guard or equivalent model of Crompton / Usha)

Supply & delivery of 240V, 50Hz, 300 mm wall bracket fan complete with all accessories. (Make- Orient Electric, Model- Wall 14 High Speed or equivalent model of Crompton / Usha)

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply & fixing 25/27A single phase starter suitable for A.C Machine with Voltage, Current and Time checking facility and having 3-digit display. (Make- Electron, Model- OLP 3+) on S & F 4 module M.S board flushed on wall incl. necessary connection.

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required.

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V 16 A Modular type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 2 nos. 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 4 nos. 6A Modular type switch, without plug top on 8 Module GI Modular type switch board with 8 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

3 x 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.

19 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.

20mm size

Blank Plate for modular box

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole

One coat of red lead/Zinc chromate priming

1st coat of synthetic enamel paint over the primer

2nd coat of synthetic enamel paint over the 1st coat

Supply and installation of 15 Ltr. Gyser with Porcelain Enamel Glass Lined Tank, 8 Bar Pressure, Magnesium Anode, Glasslined Incoloy 800 Element, Energy Seving Puf Insulation, Thermal Cut-Out, Hard Water Protection with Minimum 3 Years Warrenty on heating element and 7 Years Warrenty on Inner Tank. (Make- Crompton, Model-SOLARIUM CLX or equivalent model of Havells / Venus)

Add 18% GST (on Item No. 01.00 to 53.00).

Add 1% CESS (on Item No. 01.00 to 54.00).

N.B.: 1) Sl. No. 54.00 is variable depending on the total cost of the actual work on which 18% GST to be calculated during measurment of the work (Item No. 01.00 to 53.00). 2) Sl. No. 55.00 is variable depending on the total cost of the actual work on which 1% CESS to be calculated during measurment of the work (Item No. 01.00 to 54.00).

Please Enable Macros to View BoQ information