Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 LAccepted-AOC BANDARAILAH MALDA | MALDA | MALDA | WEST BENGAL | ₹3.8 L | L1 | Accepted-AOC Offered lowest rate |
| 2 | L2₹3.9 L+₹13,560.30 (3.58%)Rejected-Finance 00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 | PASCHIM BARDHAMAN | WEST BENGAL | 713372 | ₹3.9 L+₹13,560.30 (3.58%) | L2 | Rejected-Finance higher than L1 |
| 3 | L3₹4.0 L+₹20,992.37 (5.53%)Rejected-Finance BIBIGRAM SOUTH NEAR JALALIA GIRLS HIGH SCHOOL MALDA ENGLISHBAZAR 732101 | ENGLISHBAZAR | MALDA | WEST BENGAL | 732101 | ₹4.0 L+₹20,992.37 (5.53%) | L3 | Rejected-Finance higher than L1 |
| Sl No | Description | Qty | Unit | DEY ENTERPRISE L2 | HANNAN BUILDERS PRIVATE LIMITED L3 | NABAUDYAG ELECTRICAL ENGINEERING CO OP. SOC. LTD. L1 |
|---|---|---|---|---|---|---|
| 1.00 | Charges for Cutting the 350 mm dia Delivery pipe line by gas cutting method after dismentling the valves etc part by part as per direction of EIC (The cost includes hiring charges of Welding set, lifting tool tackles at site to complete the job as and when required) | 5 | Job | 6,150 ₹30,750 | 6,300 ₹31,500 | 6,060 ₹30,300 Lowest |
| 2.00Supply, delivery and storage of following mechanical components at site. | ||||||
| 2.01 | 350 mm dia x 20 mm thick Slipon Flange as per IS. | 6 | Nos | 3,150 ₹18,900 | 3,050 ₹18,300 | 2,916 ₹17,496 Lowest |
| 2.02 | 350mm dia Rubber Sheet | 6 | nos | 392 ₹2,352 | 388 ₹2,328 | 377 ₹2,262 Lowest |
| 3.00 | Supply and delivary at site of 350mm dia MS pipe of wall thickness 9.50mm as per IS:3589-2001 Gr-330 including of loading carriage unloading & stacking properly at Departmental store/Work Site all complete as per direction of EIC | 16 | Mtrs | 11,585 ₹1,85,360 | 11,650 ₹1,86,400 | 11,423 ₹1,82,768 Lowest |
| 4.00 | Supplying, fitting, fixing 25 mm dia length upto 75 mm bolts with nuts, washer: | 150 | kg | 155 ₹23,250 | 185 ₹27,750 | 116 ₹17,400 Lowest |
| 5.00 | Charges for replacement of 350 mm dia Delivery pipe line part by part by welding the pipe line joint with necessary fabrication and proper alignment of the pipe as required for the same by using the above supplied materials as in item no. 2.01 to 2.02 considering charges of Welding set and lifting tool tackles on hire basis as per direction of EIC. | 5 | job | 12,250 ₹61,250 | 12,300 ₹61,500 | 12,120 ₹60,600 Lowest |
| 6.00 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 22 | sqm | 37 ₹814 | 42 ₹924 | 30 ₹660 Lowest |
| 7.00Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary | ||||||
| 7.01 | Two coats | 22 | sqm | 82 ₹1,804 | 87 ₹1,914 | 78 ₹1,716 Lowest |
Tender Value
Refer Docs
EMD Value
₹9,900
Closing Date
31 Jul 2026, 4:30 pmClosed
Assistant Engineer-II,Malda Mechanical Division PH
Daulatpur PHE-Complex, Maliha Malda 732102
Replacement of vacuum pumping machinery and other allied works at Raw water pumping station of Sankaritolaghat Intake Point within Malda Arsenic area W/S scheme (Northern Sector) under MLMD, PHE DTE.
2026_PHED_1033208_2
WBPHED/AE-II/MLMD/NIeT_03 of 2026-2027
Open Tender
Electrical Work/ Equipment
Item Rate
45 days
Daulatpur PHE-Complex, Maliha Malda
Please refer Tender documents.
4 documents required · 4 mandatory
₹9,900
Yes
24 Aug 2026
23 Jul 2026
3 Aug 2026
23 Jul 2026
31 Jul 2026
23 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Charges for Cutting the 350 mm dia Delivery pipe line by gas cutting method after dismentling the valves etc part by part as per direction of EIC (The cost includes hiring charges of Welding set, lifting tool tackles at site to complete the job as and when required) | 5 | Job | - | - |
| 2Supply, delivery and storage of following mechanical components at site. | |||||
| 2.01 | 350 mm dia x 20 mm thick Slipon Flange as per IS. | 6 | Nos | - | - |
| 2.02 | 350mm dia Rubber Sheet | 6 | nos | - | - |
| 3 | Supply and delivary at site of 350mm dia MS pipe of wall thickness 9.50mm as per IS:3589-2001 Gr-330 including of loading carriage unloading & stacking properly at Departmental store/Work Site all complete as per direction of EIC | 16 | Mtrs | - | - |
| 4 | Supplying, fitting, fixing 25 mm dia length upto 75 mm bolts with nuts, washer: | 150 | kg | - | - |
| 5 | Charges for replacement of 350 mm dia Delivery pipe line part by part by welding the pipe line joint with necessary fabrication and proper alignment of the pipe as required for the same by using the above supplied materials as in item no. 2.01 to 2.02 considering charges of Welding set and lifting tool tackles on hire basis as per direction of EIC. | 5 | job | - | - |
| 6 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 22 | sqm | - | - |
| 7Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary | |||||
| 7.01 | Two coats | 22 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
Tendernotice_2.pdf
PDF • 0.51 MB
BOQ_2539487.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .