PROVN OF PATHWAY AROUND GROUND OF INF BDE MASTIC FLOORING OF LPG GODOWN AND CERTAIN SANTIONED WORKS AT MIL STATION SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

Surface dressing n exc 15 cm deep in soft /loose soil and getting out complete all as specified and directed.

Surface excavatin n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil etc complete all as specified and directed.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m deep and getting out in soft/loose soil, complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete and similar work all as specified and as directed.

M&L for Hard core of broken stone of gauge exc 63mm but n.exc 100mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 as specified and directed.

M&L for pcc 1:2:4 type BO(12.50 mm graded aggregate) as in DPC on plinth beam horizontal or vertical surfaces including necessary form work complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm, complete all as specified and directed

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed

M & L for earth filling under floor including spreading, levelling, watering and well ramming in layers n exc. 25cm thick.

M& L RCC 1:2:4 Type B-O (Using 12.5mm stone aggregate) as in beams, cantilevers, lintels over 1.5m span and Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed

M & L for RCC M-30 design mix for lintel upto 1.5m clear span, and the like incl formwork complete all as specified and directed.

M&L reinforced cement concrete (1:2:4) type B1 using 20 mm graeded stone aggregate as in slab , beam columns etc ,basement slab ,underreamed piles and mass concrete complete all as specified and directed

M&L 100mm thick plain Cement concrete, 1:3;6 Type C-2 (using 40 mm graded aggregate) as in sub base of floors complete all as specified and as directed

M&L plain Cement concrete 75mm thick (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor all as specified and directed.

M&L PCC 1:2:4, type B1, using 20mm graded stone aggregate as in kerbs, mud stops rounded or chamfered on edges and similar work all as specified and as directed.

M&L providing precast cement concrete1:2:4 type B-1 in cover slabs (for manholes etc ) ,shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed

M&L 100mm plain thick Cement concreteType B-2 , 1:2:4 (using 40 mm graded aggregate) as in floors complete all as specified and as directed

M & L for machine rubber moulded pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thick M-40 grade over and including 50mm thick sand cushion, all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg laid in panel finished even & smooth with using extra cement as in flooring complete all as specified and as directed.

M & L for plain Cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate) 80mm thick finished even and smooth without using extra cement.

M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection complete all as specified and as directed.

M&L 50mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in subbase under floors complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B0 using 12.5/20mm graded stone aggregate as in floor finish complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding in CM 1:4 complete all as specified and as directed

M & L glazed ceramic coloured tiles (300x200mm) x 7mm thick, in vertical surfaces, etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over 10mm thick screed bedding in CM 1:3 all as specified.

M&L for machine cut Kota stone slab 20-25 mm thick over cement screed base 20mm, in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and directed

M & L for Formwork to rough finished surfaces of sides & soffits of floor or roof beams, beam haunchings, girders, bressummers,sides of lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed

M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) fair finished surfaces of concrete flat complete all as specified and as directed

S&F MS TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for cols, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as lper item No 35 as above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for rendering 15mm th on fair faces of brick work or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement as in vertical surfaces.

M&L for rendering 15mm th on fair faces of brick work or concrete surfaces in CM 1:6 as specidied and directed.

M&L for rendering 15 mm thick in cement plaster 1:4 on fair faces of brick work and surface finished even and fair complete all as specified and as directed

M & L for rendering 5mm thick in CM (1:4) over 10mm thick in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M & L for two coats of colour wash over a coat of white wash on extranal plastered surfaces incl preparation of surfaces complete all as specified and as directed.

M & L applying three coats of white wash on walls incl preparation of new surfaces complete all as specified and as directed

M&L for preparation of newly plastered surface of wall and applying 2 coats of cement base paint over a coat of alkali resistance primer complete all as specified.

M & L for Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S & F 35 mm thick factory made 2nd class hardwood plain framed, paneled shutters (two pannels) with lock rail and panel of 9mm thick B.W.P. commercial plywood or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkhat complete as specified and directed.

S&F steel ventilator with top hung shutter including incl hinges steel peg stay complete all as specified and directed

M&L preparing newly wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation

S & F for 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and directed.

S & F for 125mm long brass handles, cast type, polished bright complete all specified and directed.

S & F for 100 mm long butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed

S & F 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specifed and directed

S & F Aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F sheet glass 5.5 mm thick ordinary quality in aluminium partition wall all as specified and directed

S&F PVC insulation panels with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium /G.I/M.S as per specification and drawing as in false ceiling all as specified, Hangers 6mm dia GI (upto 1200 mm in length ) adjusting levels fixed to roof slabs by ceiling cleats made of GI Flat 40x3 mm size 60 mm long complete all as specified and as directed

M&L for providing granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match providing joint free coloured tiles including 15 mm thick cement screed bed in CM 1:4 complete all as specified

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M & L for Glazed ceramic tiles in mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 to receive wall tiles, complete all as specified and as directed.

S&F 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over and including rendering 10 mm thick in CM 1:4 to receive wall tiles, complete all as specified and as directed.

S&F of 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, all as specified and directed.

S&F for 0.63mm thick plain, galvanised, mild steel sheeting, in crumple section joints, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, all as specified and directed.

M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specific and drawing complete all as specified and directed

M & L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M&L for vent cowl for incinerator including fixing of PGI sheet, nut and bolt 150 mm long and 12mm dia of bolt with round washer 3mm thick including flat iron 30*5 mm.

S & F framed work as in chowkats or frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fiting complete all as specified.

S&F for mild steel window Framed work such as grills, plain, let in and fixed independently in wooden frames, Lor T section, supports for shelves etc., and similar articles conforming to Fe 290 Gde E-165 including drilling holes complete all as specified and directed. etc with ends of bars shouldered barred iron doors and similar work framed and hung as gates/doors incl pintel hinges, stops, sliding bolts etc.

S&F 75 mm bore PVC (SWR) pipes of any length laid in trenches or in floors all as specified and directed.

M & L for forming construction joint 30mm deep x 10mm wide filled with Grade 'A' sealing compound complete all as specified and directed.

M&L pre painted galvanium aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/cladding to wall fixed with self tapping crews as specified

M&L for roof trusses ,trussed , purlins, crane gantries , rails and fastenings and heavy bracket framing (Beam , tee, angle, channel or flat section )including distances pieces , cleats etc

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L 75 mm thick (1:2:4) Type B-1, Plain cement concrete with using 20mm graded aggregate as in hard standing etc finished without using extra cement , complete all as specified and directed.

M&L for forming contraction (Dummy joint) 65mm deep x 10mm filled with sealing compound grade A,complete all as specified and directed.

Excavation over areas, n exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

M&L precast cement concrete solid building blocks/Kerb Stone or slabs, type B-1,1:2:4 mix ( using 20mm graded aggregate ), 10cm thick ( with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified

M&L vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

M&L for providing and laying 25 mm thick bitumen mastic flooring in single coat in proportion of 1:0.5:0.375:0.375 (1-Bitumen : 0.5-Coarse Aggregate of 6mm : 0.375-Crushed stone screening : 0.375- Lime stone dust) shall be mixed thoroughly and continously heated for a period not less than 2 hour, temperature of 175 to 200 Deg C laid in one layer as per IS 1195 of 1968 including rubbing finishing and leveling etc complete as directed by Engr-in-Charge.

M & L applying two coats of dry distemper white or tinted on newly plastered wall surfaces including preparation and clearcolle of surfaces to distempering, complete all as specified.

M & L applying one coat of white wash on old decorated or undecorated ceiling surfaces including preperation of surfaces, complete all as specified.

S&F 105x 60mm size pressed steel frame for door with one or more rebetes including nesseary fixing lugs ,hindges , lock strike plate etc as specified and directed.

M&L pcc 1:3:6 (nominal mix )type c0 using 12.5 mm size aggergate in preesed steel door frame.

S&F 40 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.

S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified & directed.

S&F 200 mm long MS barrel tower bolt,stove enamelled black with bright bolt.

S&F 150mm size mild steel pressed handle, oval type, stove enamelled black.

S&F 1 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks , water troughs, ducts,urinal trough and funnels etc , cut to size,edge beaded if directed, holes punched , including round headed screws,clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded /riveted seams including bending, turning up,mitred angles, stopped ends, outlets etc as required

S&F Exhaust fan 300 mm sweep single Heavy duty phase 50 Hz, 1400 RPM AC with provision of making hole on wall with louver and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.198, 3 core from ceiling rose to connection of exhaust fan on wall complete all as specified.

S & F ceiling fan complete with electronic Step type regulator and accessories 230 V ,1200mm sweep, 5 star rated.Energy Efficiency Make- Havells Cat Part No- ES NEO KVA

S & F 15 W Solar LED, 5 M TUB Pole Standalone Street Light Range - (3 Days Backup) For Panel,Battery, Pole and SCC specification pls. contact branch office or refer Catalogue Solar Standalone Street Light system mentioned below includes LED street Light with in-built SCC, SPV Panel, Battery, HDG Tubular Pole.including excavation and PCC work all as specified and directed by Engr- in Charge.

Supply and fix Refrigerator, electric driven (single phase), capacity 360 Litres, 4 star rated Convertible Freezer Two door Frost Free (Inverter Compressir)complete all as specified. Make-Whirl Phool,LG,SAMSUNG

Supply and Installation of Solar water heating system ,Flat plate collector type ,with heat exchanger of 1000 litre per day capacity ,with electrical heating back up including testing commissioning complete all as specified and as directed.

M&L for fabricating MS frame work using MS flats rolled steel equal angle etc of approved size, confirming to Fe-410-0 by cutting to reqd/size bending to shape in hot or cold position with necessary welding clamp nut bolt and washer including painting with two coat of synthetic enamel paint as approved by GE over a coat of red oxide primer complete all as specified.

M&L for rotational moulded polyethylene water storage tanks 1000 ltrs capacity (Cylindrical vertical with closed top) hoisted and fix in position complete all as specified.

M&L for copper wiring 2x6.O sqmm and 4.0 sqmm earth wire of FRLS PVC insulated single core, PVC conduit pipe including clamp with suitable size of nut, bolt & washers complete all as specified and as directed by Engr-In-Charge.

S &F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole and nutral MCB 20 Amp.

Supply and fixing Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore.

Supply and fixingGun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed 20mm bore.

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F Bib tap 15mm bore cast copper alloy chromium plated for iron pipe and fixed.

Cutting of existing line 15mm to 25mmin bore and making arrangement for new pipe line connection of 15mm TO 25mm water line for Solar.

S&F Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour. complete all as specified and as directed by Engr-In-Charge

S&F 15mm dia stop cock cast copper alloy chromium plated screwed down to pipe or union complete all as specified and as directed by Engr-In-charge.

S&F 15mm dia brass CP mixture for mixing cold & Hot water screwed down joint to steel pipe or union and plugging and screwing to wall complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises complete all as specified and as directed.

M & L for cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) 75 mm thick as in sub base of floor complete all as specified and as directed.

M & L for providing precast cement concrete soilid building blocks/curve stone set in cement mortar 1:4 type B-1 1:2:4 (20 MM graded stone aggreaget).

M & L for prepartion of new concrete surface of any description over 10cm width or girth not otherwise described and applying two coats of plastic emulsion paint over a coat of primer.

M & L for prepartion of new concrete surface of any description over 10cm width or girth not otherwise described and applying two coats of plastic emulsion paint over a coat of primer. Note :- Tenderer may note that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract.

munish chandra

UTTRAKHAND BUILDERS

M/S CHAUHAN ELECTRIC WORKS

M/S WASEEM KHAN CONTRACTOR