M/o Completed schemes under NA-II (Hort. Zone).

Cleaning i/c refurbishment and painting of existing GI Poles upto 3 meter with 2 coats of synthetic enamel paint of required shade as approved by Engineer-in-charge complete as required.

Supplying of following sizes of PVC insulated and PVC sheathed/XLPE aluminium conductor armoured power cable of 1.1 KV grade conformimg to IS:7098(Part-I) i/c connection & testing etc. as required and as per technical specification enclosed.

4Cx50 Sq.mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) (DSR 2022 E&M/ Item No.- 14.16.1)

Supplying of following sizes of PVC insulated and PVC sheathed/XLPE copper conductor unarmoured power cable of 1.1 KV grade conforming to IS: 7098 (Part-1) i/c connection & testing etc. as required and as per technical specification enclosed.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (upto 750 mm.) or as directed by Engineer-in-charge including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. 40 mm dia (OD-40 mm & ID-32 mm nominal)

Laying of one number PVC insulated and PVC sheeted/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal/DWC pipe / pole as required.

Up to 35 Sq.mm (DSR 2025 E&M/ Item No.- 10.5.1)

Supplying, installation, testing and commissioning of floor mounted feeder panel, duly compartmentalized (outdoor type) double door cubicle panel board of size 500 mmx500mmx200 mm made out of 2 mm thick CRCA MS sheet having hinged gasketed cover and screw type knob with double locking arrangement and mounted on MS angle iron base frame and foundation as per drawing approved by Engineer-In-Charge i/c supplying & fixing of the following items:- INCOMER a) 63 A 4P MCB - 1 No OUTGOING b) 5-32 A TP&N MCB-4 Nos.

Supplying, Installation, testing and commissioning of Floor mounted free standing LT feeder pillar cubical type duly compartmentalised single door of nominal size 1000mm x 900mm x 300mm deep with general arrangemnent made out of 2 mm thick CRCA MS sheet having hinged gasketed cover and screw type knob welding of MS angle iron of size 40mm x 40mm x 6 mm x 1000mm long grouted on 1:3:6 CC foundation , connection, inter-connection with suitable size of FRLS PVC insulated copper conductor earth studs i/c supplying and fixing of following accessories etc. as reqd. (a) 63 Amps. TP &N MCB 10 KA ----- 1 No. (b) 32 Amp DP MCB - 4 Nos. (c) 100 Amp , Four strip aluminum busbar of suitable size - 1 set (d) 32 A TP MCB(C-curve) -1 No. (e) volt meter indicating Lamp - 1set . (f) Danger notice plate ----- 1 No. (g) Lifting hook on the top of the feeder pillar - 1 No. Note: Foundation duly plastered and finished shall be made as per site requirement for which nothing extra shall be paid.

Please Enable Macros to View BoQ information