PROVISION OF TOILET BLOCK FOR MES OHT AND OVER HEAD SHED AT AMPHIBIAN SAINIK INSTITUTE AND OVERHEAD RAIN SHED FROM OFFICE COMPLEX (BLDG NO. P-300) TO B COMPANY LINE (BLDG NO. P-308) TO MAIN ROAD OF INF BN NO II AT BRICHGUNJ MILITARY STATION, PORT BL

Amount

Surfaces dressing n exc 15cm deep and getting out hard/ Dense Soil complete all as specified and directed by Engineer-in-charge

Rough excavation not exceeding 1.5 m deep and getting out in soft / Loose soil complete all as specified and directed by Engineer-in-charge

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out had dense soil etc. complete all as specified and directed by Engineer-in-charge

Excavation over areas n exc 1.5 m deep and getting out in hard dense soil all as specified and as directed by engineer in charge.

Excavation in trenches in hard/dense soil n exc 1.5m deep and n.exc 1.5m wide and getting out, etc complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out for taking out or laying of pipes/cable of any size in soft/ loose soil complete all as specified and as directed.

Material and labour Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-charge

Removal of excavated soil not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-charge

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface.

Spreading and levelling in layers n. exc 25cm thick and well ramming including watering all as specified and directed.

Material and labour broken stone or boulders hard core of gauge n.exc.63 mm, deposited, spread and levelled in layers n.exc. 15 Cm thick, watered and rolled/rammed to a true surface, etc complete all as specified and directed by Engineer-in-charge.

Demolition of PCC Block masonry work all as specified and directed by engineer in charge.

Demolition of Concrete in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engineer-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed by Engineer-in-charge.

Material and labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested.

Material and labour for 100 mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate), in sub base of flooring/hard standing etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in 75mm thick as in sub base complete all as specified and as directed.

Material and labour for precast cement concrete solid building block 10cm thick in width setting in CM 1:6 10 cm thick(with plain or interlocking joints as directed) setting in mortar, complete in walls complete all as specified and as directed.

Material and labour for pre-cast cement concrete block masonry with PCC 1:3:6,type C1, with solid blocks exc 10cm in width and set in CM (1:4) all as specified and directed by Engineer-in-charge.

Material and labour pre-cast cement concrete masonry in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, exceeding 10cm in width setting in CM 1:6 complete all as specified and as directed by Engineer-in-charge.

Material and labour PCC 1:2:4 type B1 (using 20mm graded stone aggregates) for Coping and Haunching concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in 30mm thick as in sub base complete all as specified and as directed by Engineer-in-charge.

Material and labour RCC precast using 1:2:4 type B1 (using 20mm graded stone aggregate) for cover slabs complete all as specified and as directed by Engineer-in-charge.

Material and labour cement concrete in foundations, filling and mass concrete type D-2 1:4:8 (40mm graded aggregate) complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC in foundation filling and mass concrete type C2 1:3:6 (40mm graded stone aggregate) all as specified and directed by Engineer-in-charge.

Material and labour for Plain cement concrete 1:2:4, type B0, (using 12.50mm graded stone aggregate) for Kerbs etc including weathering slightly chamfered angles all as directed by Engineer-in-Charge.

Material and labour RCC M-30 mix concrete using 20mm graded aggregate for foundation and plinth beam filling complete all as specified and as directed by Engineer-in-charge.

Material and labour RCC M-30 (design mix M-30 grade using 20mm graded aggregate for columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in-charge.

Material and labour RCC M-30 (design mix M-30 grade using 20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer-in-charge.

Use and waste of formwork flat or curved to sides of concrete foundations, footing, bases of columns, and plinth beams and similar work vertical or to batter complete all as specified and as directed by Engineer-in-charge.

Use and waste of formwork flat or curved to sides of concrete pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed by Engineer-in-charge.

Use and waste of formwork falt or curved to sides and soffits of floor or roof beam haunchings, girders, bressummers, lintels, splays between floors and beams etc. complete all as specified and as directed by Engineer-in-charge.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour for 6mm to 8mm dia Mild steel TMT bars, cut to length and bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

Material and labour for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment

Supply and Fix for mild steel work in tubular trusses FE 410-W-(Gde-E-250) Quality-A including special shaped washer etc, complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240.

Material and labour mild steel works for wind ties for roof & supporting tie for valley gutter including securing bolts including all necessary drilling, bolting or riveting, welding etc, and similar work conforming to Fe-290 Gde E-165

Material and labour mild steel screw bolts (machine made) with hexagonal or square heads with dia of neck 11 to 15mm at one end to be fitted with washer and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm long and n.exc 15cm long all as specified and directed by engineer in charge.

Material and labour for plates of plain or chequered, square cut or notched of steel welded to steel structure for base plate etc complete all as specified and as directed by Engineer-in-charge.

Supply and Fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified and directed.

Supply and Fix MS steel work in tubular, trusses incl purlins, special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade 240 all as specified and as directed by Engineer-in-charge.

Supply and Fix Mild steel Bolts exceeding 12mm and not exceeding 20mm dia, purpose made with Hexagonal or Square head one end and screwed the other, or screw both ends, each screwed end to be fitted with washers and one hexagonal or Square nut, exc 30 cm long all as specified and directed.

Material and labour for 15mm thick external rendering in two layers of 5mm thick in CM (1:4) mixed with water proofing compound (water proofing compound shall be @3% weight of cement) over and including a coat of 10mm thick in CM (1:6) over brick or concrete surfaces finished even and fair. Note: Rate qtd is including supply of WPC.

Material and labour Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth without using extra cement.

Material and labour Rendering in CM 1:6 15mm thick on other than fair faces of brick masonry finished fair and even.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping and washing down with water to remove dust & brushing neat cement slurry with 3kgs of cement per sqm etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Preparation of new or previously untreated steel surfaces & applying a two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth, not otherwise described

Material and labour Preparation of newly plastered surfaces of Wall and applying two coats of Cement Base paint all as specified and directed.

Material and labour for applying three coats white wash of newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.

Material and labour for two coat of weather proof exterior acrylic emulsion paint with anti-fungal property over a coat of primer on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix Pre-painted galvalume aluminium, zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-taping screws all as specified.

Supply and Fix Pre-painted galvalume aluminium, zinc coating GI based plane steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-taping screws all as specified.

Material and labour for false ceiling with aluminium grid work(size of grid 605X605 mm) with 35X25X1.5 mm main tee and 25 X25X1.4 mm, cross tee and wall angle and suspended with 3.15 mm dia ,GI wire , hooked to roof with needful adjustment bolts at an interval of 1.20 m, centre to centre staggered and board with Eco board, decorative type , size 600 mm X600 mm 4 mm thick, finished with two coats of oil bound distemper over a coat of primer on exposed surfaces complete all as specified and as directed

Material and labour Non Skid coloured ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc set and joined in neat cement slurry and pointed in coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement plaster 1:4.

Material and labour for coloured glazed ceramic tiles 300 x 200 x7mm thick as in dado/skirting set and joined in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:3 on wall surfaces complete all as specified and as directed.

Material and labour Chequered cement concrete tiles, with grey cement and pigment 30cm x30cm x25mm thick set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:4 all as specified and directed.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

All as per item No 58 here in before but on vertical surfaces as in risers of steps.

Supply and Fix aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/ partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, all as specified and as directed.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply and Fix Solid PVC Door frame of size 50mm x47mm made out of 5mm plain colour PVR sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing.

Supply and Fix factory made solid panel PVC door shutter 30mm thick (style consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having at PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed

Supply and Fix 150mm long extruded aluminium alloy anodised handle fabricated type

Supply and Fix 100mm long extruded aluminium alloy anodised handle fabricated type

Supply and Fix Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy.

Supply and Fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long

Supply and Fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long

Supply and Fix Aluminium anodised but hinges 75mm long extruded alluminium alloy with galvanised mild steel hinge pin, type C-22

Supply and Fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms)

Supply and Fix for Soap dish, vitreous China white approximate size 160x160x90mm embedded in the wall

Supply and Fix for 15mm bore Unplasticised PVC pipes of pressure rating 10kg/cm2 fixed complete to walls, ceiling or in floors etc, any type of pipe concealed.

Supply and Fix 15 mm bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes in repairs all as specified and directed.

Supply and Fix 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

Supply and Fix Bib taps 15 mm bore fancy type, chromium plated with long shank and cup (concealed type) stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Supply and Fix in Brass chromium plated shower rose 125mm size with swivel joints, including fixing to steel pipe or union.

Supply and Fix in PVC waste pipe, 32mm dia for WHB complete all as specified and as directed by Engineer-in-Charge

Supply and Fix in PVC waste pipe, 32mm dia for urinal complete all as specified and as directed by Engineer-in-Charge

Supply and Fix in PVC connection 15mm size with PTMT nuts of length 600mm.

Supply and Fix vitreous china water closet, pedestal type, white including flush pipe, seat cover etc, including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix vitreous China wash hand basin 'OVAL TYPE' 550 mm including with singe tap hole CP pillar cock of 15mm dia brass CP chain and rubber plug, waste pipe and PVC connection.

Supply and Fix for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)

Supply and Fix PVC low level flushing cistern, 10 litres capacity including PVC flush pipe of required length, 15 mm bore ball valve and PVC connection 300mm and other accessories, complete all as specified and directed.

Supply and Fix rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

Supply and Fix 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joint laid in trenches/fixed on floor/wall including jointing with solvent cement all as specified and directed by Engineer-in-Charge.

Material and labour for UPVC 75mm dia Nahani trap/floor trap with PVC grating complete all as specified and directed.

Supply and Fix for 20mm bore Unplasticised PVC pipes of pressure rating 10kg/cm2 fixed complete to walls ceiling or in floors etc, any type of pipe.

Material and labour cast iron soil waste and vent pipes, 150mm dia (internal dia) in any length with or without ears, with cement joints laid in trenches or in floors jointed as specified.

Material and labour cast iron soil waste and vent pipes, 100 mm dia (internal dia) in any length with or without ears, with cement joints fixed in wall jointed as specified.

Supply and Fix Tubes, 'medium grade', galvanised 25 mm, with all fitting; laid in trenches / wall / floor complete all as specified and as directed

Supply and fix Gun-metal, globe or gate valves of size 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed by Engineer -in -Charge.

Material and labour for taking connection from existing main water CI/DI line of dia 150/100 mm by inserting 25 mm pipe line all as specified and as directed. Note: Rate deemed to be inclusive of any other materials required at site to taken connection from main water line.

Construction of RCC Septic tank for 10 users, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls, Base Slab, Baffle walls and Roof Slab including beams etc with Vent shaft, manhole openings with cover connection etc, complete with effective depth of 1.5 meter and overall depth of 3 meter complete as per CE PB TD dwg No79 dt 04-7-88, revised on 27 -10-1995 complete all as specified and as directed by Engineer -in -Charge.

Material & labour for point wiring as per colour coding with 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable 1100 volt drawn through in and including 19 mm thick rigid non-metallic PVC concealed conduit medium quality including new sunken terminal boxes duly epoxy painted and 3mm thick plastic laminated sheet top cover and continuity earth wire PVC insulated copper conductor standard unsheathed of size 1.5sqmm FRLS PVC insulated and unsheathed cable 1100 volts for one light point / bell point controlled by one switch/ fan point controlled by one switch through regulator including cutting chases pinning in making good to facings where required and pointing in cement mortar 1:3 and cutting for concealed conduit wiring etc for One light point/Exhaust fan controlled by one switch complete all as specified.

All as per item No 95 here in before but One fan point controlled by one switch and one regulator

All as per item No 95 here in before but One 3 pin switch socket outlet point 5 amps on same board with other switches.

All as per item No 95 here in before but One 3 pin switch socket outlet point 5 amps on independent board.

Material and labour for point wiring with 4 Sqmm FRLS PVC insulated and unsheathed single core stranded copper conductor cable 1100 volts in and including PVC concealed conduit medium quality, for 2 in one 3 pin 5Amps & 15 Amps multipurpose socket outlet on independent board and cast iron or pressed steel terminal box duly epoxy painted and with new laminated sheet top cover 3 mm thick concealed in wall including PVC insulated & unsheathed copper conductor cable 4 Sqmm size FRLS PVC insulated and unsheathed cable 1100 volts for earth continuity conductor and connected to earth dolly as per existing all as specified and directed by Engineer-in-Charge.

Supply and fix switch piano flush type single pole one way 5 amps, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Socket outlet 2 in 1, 3 pin, 5A complete all as specified and as directed by Engineer-in-Charge.

Supply and fix switch socket outlet combination 3 & 2 pin (multi pin) 5 amps flush/box type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix switch socket outlet combination, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed by Engineer-in-Charge.

Supply and fix ceiling rose surface Bakelite 65 x 50 mm 3 terminal, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge Make:-Anchor/Havells/Bajaj

Supply and fix metal enclosure distribution board SPN, 2 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, Complete all as as specified and as directed by Engineer-in-Charge . Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fix in repair MCB SPN, 240 volts, 6 to 32 amps C series complete all as specified and as directed by Engineer-in-Charge

Supply, lay, test and commissioning underground XLPE insulated and PVC sheathed, armoured heavy duty underground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 6 sq mm

Supply and lay cable XLPE Insulated screened ,PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 4 core 6 Sqmm 1100 Volts grade with stranded aluminium conductors all as per IS -7098(Part-1 1977) and Part 2- 1985 of following sizes in trench / wall / floor as specified by Eng-In-Charge :- Note: Rate deemed to be inclusive of cable lugs of suitable size and taking connection from existing panel & in any alteration works requires to taken out connection from existing panel

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers, bends etc of size 50 mm OD and 38mm ID confirming to IS 14930 -II and ISI Marked all specified and directed.

Wiring for submain wiring in PVC conduit along with 2x1.5 sqmm and 1x1.5 sqmm earth wire of FR PVC insulated copper conductor single core cable in surface/recessed as required.

Supply and fix outdoor type FRP junction box of size 300x200x105mm, light weight suitable for pole/wall mounting using clamps/bolts and nuts including incl necessary three phase connector of capacity 32 Amps for loop in loop out cable connection complete all as specified and as directed.

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, complete all as as specified and as directed by Engineer-in-Charge. Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/ thimbles etc...

Supply and fix metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, complete all as as specified and as directed by Engineer-in-Charge Make Indoasan/C&S/Legrand. Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB SPN) of following poles and current carrying capacity 5 to 32 Amps in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB SP) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and as directed by Engineer-in-Charge.

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core sheathed cable from fitting to ceiling rose all as specified and as directed.

Supply and Fix LED light fittings 20 Watts LED luminaries comprises of extruded channel in thermally conductive material , high translucent serrted milky white diffuser to get glare free and smooth light distribution all as specified and as directed

Supply and Fix cove light fittings synthetic white colour 4 Watts 6500 K all as specified and as directed

Supply and fix Recess mounted LED 12 w Round type with in die cast aluminium housing finished in premium white powder coating prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, complete all as specified and directed by Engineer-in-Charge.

Supply and Fix building security light luminaries 20 W LED IP 66 made up of pressure die cast aluminium housing with polycarbonate cover and high power LEDs and secondary lenses including GI brackets GI tube of 40mm dia of 2 m length and mounting accessories including taking down of existing light fittings all as specified and directed by Engineer-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, Copper winding of sweep 200m all as specified and as directed

Supply and fix ceiling fan suitable for working on AC 230 volts, 50 Hz,1200 mm sweep 5 star rating with down rod and canopy colour of milky white including suitable fan hook anchor flashner for fixing of fan on ceiling complete all as specified and as directed.

Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised wire 4 mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe light grade for protection of GI wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, with 50mm thick RCC 1:2:4 B1 precast earth pit cover with 6Nos 8mm dia TMT bars both ways and test point terminal made of gun metal including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50m, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I all as specified and as directed.

Supply and filling pulverized stone dust to the full width of trenches for protection of cables including spreading and punning down including watering consolidation complete all as specified and directed. Note : Thickness of stone dust will be paid after cushioning after punning.

Supply, lay, test and commissioning underground XLPE insulated and PVC sheathed, armoured heavy duty underground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 sq mm.

Supply and lay un-reinforced precast concrete cable cover, class, LV, Type 1 flat size 250 x 150 x 40 mm laid dry in trenches over underground cables, embossed with "ELECTRIC" on the top surface complete all as specified and as directed

Material and labour for cutting of existing road not more than 50 cm wide and not exceeding 60 cm depth & length upto 6m for laying of cable/pipeline and making good by concreting to match with the existing location complete all as specified and as directed

Supply and lay steel tubes light grade 25mm outer dia of ISI marked as per IS-1239 part-I 2004 galvanised with all fittings and fixed complete to wall and ceiling, on pole or laid in floor or in treanches etc for protection of underground cables complete all as specified and directed.

M/s S U Enterprises

CITY CONSTRUCTION COMPANYU

M/s Saina Enterprises

M/s Kamal Electrical

USR Transport

Govinda Swamy Construction

RPG AND COMPANY