REPAIRS TO FENCING COMPOUND WALL PERIMETER WALL AND CONNECTED WORKS AT INS CHILKA UNDER GE CHILKA

Amount

Dismantling posts or struts (wood, steel , RCC) any section, including taking out embeded portion in concrete , brick work, masonry etc and making good disturbed ground complete all as specified and as directed.

Dismantling posts or struts (wood, steel , RCC) any section, including taking out embeded portion in natural ground and making good disturbed ground complete all as specified and as directed.

M&L cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum and getting out including returning filling and removal of surplus soil as required upto a distance of 50 m complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in wall , pillars ,columns, posts etc complete all as specified and as directed.

M&L for providing reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area not exceeding 100 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and as directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and as directed

All as per item No 7 above but 5 mm dia and over upto 10 mm dia as in stirrups, spacers and binders complete all as specified and directed

Taking down existing Galvanised steel barbed wire of any type and of any description complete all as specified and as directed. Note : Each line of wire shall be measured.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. Note : Each line of wire shall be measured.

Fixing only old serviceable galvanised steel barbed wire of any type and of any description complete all as specified and as directed. Note : Each line of wire shall be measured.

Dismantling wrought iron or mild steel work of any Description not otherwise provided for complete all as specified and as directed.

S&F mild steel post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and conforming to similar work Fe-290 grade E-165 complete all as specified and as directed.

S&F mild steel framed work as gates, including pintle hinges, stops, hand made sliding bolts, etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

S&F mild steel screw bolts( machine made) of dia 5 to 10 mm having length of bolt not exceeding 5 cm long with hexagonal or square at one end and screwd with other end complete all as specified and as directed.

M&L for preparation of new steel surface of any description over 10 cm in width or grith and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for walling of random rubble , uncoursed , well bonded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded and solidly hearted , built in cement mortar 1:6 except stone complete all as specified and as directed. Note :- Serviceable RR stone obtained from demolition shall be reused.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed

M&L 10 mm thick rendering on fair faces of brick work or stone masonary surface in cement mortar 1:4, surface finished even and fair complete all as specified and as directed

M&L 15mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 , surface finished even and fair complete all as specified and directed.

M&L flush pointing to random rubble masonry uncoursed or brought upto course in cement mortar 1:4 complete all as specified and as directed

M&L for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coat of cement base paint white or tinted over one coat of cement primer as approved on prepared surfaces of walls complete all as specified and as directed

M&L PCC type B-1 1:2:4 using 20 mm graded stone aggregate as in copings, kneelers, apex stones, kerbs and similar works complete all as specified and as directed

Demolition of cement concrete not exceeding 15cm thick below or above ground level and removing the debris to a distance not exceeding 50 m from site complete all as specified and as directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of hard standing/pathway complete all as specified and as directed.

M&L 75mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring over subbase including spike rolling to surface or making impression of expanded metal whilst the concrete is green complete all as specified and as directed.

M&L Forming Construction joint 30 mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified and as directed

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Fixing only chain link fencing including lines wires, any mesh, size (100mmx100mm) of standards rails straining bolts etc including provision of binding wire complete all as specified and as directed

Supply only 4mm dia galvanised steel wire, 100x100 mm mesh in Chain link fencing complete all as specified and as directed

S&F in repair, galvanised welded steel wire mesh not exceeding 4 Kg/Sqm made up into mattresses, lapped, wired and laid in position including closing as per sample complete all as specified and as directed

S&F Mild steel Round bars 5mm dia and over upto 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

M&L for 40 mm thick precast cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in louvers and jallies (measured solid including all moulding but excluding frame and set in cement mortar 1:4 including taking out existing broken louvers or jallies complete all as specified and as directed

S&F in repair for concretina coil (dia 600 mm) SRPBT made up hot dip GI wire (Spring centre) have 50 No of turn 125 clip barb length 23.5mm, 2.5 mm high carbon core wire, tape with 18.60 mm, centre with 7.4 mm including anticorrosive bitumineous paint coated all as per IS 158 (as per sample) complete all as specified and as directed.

S&F in repair netting PVC plastic mesh of any approved colour minimum thickness 2mm with aperature 1 inch approx (as per sample) complete all as specified and as directed

BHARAT KUMAR BALL

SANJAYA KUMAR PALAI

M/S JAGANNATH SASMAL