Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹11.4 L+₹47,520 (4.36%)Rejected-Finance WARD NO 16 HOUSE NO 66 SALLIAN TALAB UDHAMPUR 182 101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | Rejected-Technical 20 JAIN BAZAR JAMMU 180003 J K | JAMMU | JAMMU | J K | 180003 | - | Rejected-Technical MOU with OEM/reputed manufacturer/service provider of EOT crane not found attached. | |
| 4 | Rejected-Technical | - | Rejected-Technical MOU with OEM/reputed manufacturer/service provider of EOT crane not found attached. |
| Sl No | Description | Qty | Unit | ANIKET TRADERS L1 | LUXMI ELECTRONIC WORKS L2 |
|---|---|---|---|---|---|
| 1.00 | Overall accessed maintenance cost for maintenance of electrically operated over head travelling cranes normal (EOT) single girder type of 2.0 tonne capacity installed at outer portion of Bldg No 1, 3, 5, 7,9 & 13 at Air Force Station Udhampur comprising of electric motor for long travel, hoist motion, creeping micro speed and electrical control panel consisting of MCCBs/main switches, step down transformer, contactors, HRC fuses & mechanical wire rope with drum, brake unit, gear boxes, oil levels, motor bed ends, electrical control cables etc & comprising of material, labour and T&P for routine, periodical, preventive maintenance or breakdown repair to EOT crane functional at all time all as specified and directed by the Engr-in-charge. | 6 | Each Job | 12,000 ₹72,000 Lowest | 20,000 ₹1,20,000 |
| 2.00 | Overall accessed maintenance cost for maintenance of electrically operated over head travelling cranes Normal (EOT) double girder type of 2.0 tonne capacity installed at inner portion of Bldg No 1, 3, 5, 7,9 & 13 at Air Force Station Udhampur comprising of electric motor for long travel, hoist motion, creeping micro speed and electrical control panel consisting of MCCBs/main switches, step down transformer, contactors, HRC fuses & mechanical wire rope with drum, brake unit, gear boxes, oil levels, motor bed ends, electrical control cables etc & comprising of material, labour and T&P for routine, periodical, preventive maintenance or breakdown repair to make EOT crane functional at all time all as specified and directed by the Engr-in-charge.
Note: For Items No 1 & 2 :-
(a) All spare parts required during maintenance shall be measured and paid separately.
(b) The maintenace of crane throughout the contract period shall be responsibilty of contractor and shall be quoted accordingly.
(c) Minor repair/checking fault/Testing/commissoining of work shall deemed to be included in the quoted rate as such under mentioned work :-
(i) Motors – Check terminal connections slip rings, carbon bushes alignment of motors, couplings, clutches, breakes if any tight/adjust if required.
(iii) Wire Rope – Check lubrication and number of broken wires, Hook – Check for free rotation of hook, lubrication of moving parts.
(iii) Electrical – Check contactor tips limit switch operating mechanism including connections & testing of LT panel of crane complete.
(iv) Checking of all movement i.e Long Travel, Cross travel/ hoist lifting motion.
(v) The record of servicing will be maintained by Contractor, it should be duly signed by user and MES Rep and at the time of payment contractor will produce the same.
(vii) Oiling/greasing of bearing of all wheel LT/CT motion mechanism included in the quoted rate.
(vii) Cleaning of all parts and rail/wheel of cranes complete all as specified and directed by the Eng-in-charge. | 6 | Each Job | 14,000 ₹84,000 Lowest | 20,000 ₹1,20,000 |
| 3.00 | M & L for Load testing of EOT Gantry of 2.0 tonne capacity at 110% of full load including arrangement of dead load all T&P required for testing complete all as specified and directed directed by Engg in charge
Note : (i) The load for load testing and shifting arrangement of load will be done by contractor and the rates for the same deemed to be included in quoted rates.
(ii) The load testing for LT/CT/hoist motion will be done in the presence of MES Rep and User will be done by contractor and the record of load testing will be maintained duly signed by User and MES Rep. | 12 | Each Job | 11,000 ₹1,32,000 | 7,800 ₹93,600 Lowest |
| 4.00 | M&L in repair for brake adjustment of any EOT crane (single guarder/double guarder) of any capacity in presence of user all as specified & directed by th Eng-in-Charge | 5 | Each Job | 5,000 ₹25,000 | 3,300 ₹16,500 Lowest |
| 5.00 | S&F in repair step down transformer suitable for 1.0 to 2.0 ton EOT gantry complete all as specified & directed by Eng-in-Charge. | 3 | Each | 3,000 ₹9,000 Lowest | 6,000 ₹18,000 |
| 6.00 | S&F in repair single phase preventor suitable for 01 to 2.0 ton EOT gantry complete all as specified & directed by Eng-in-Charge. | 3 | Each | 2,000 ₹6,000 | 600 ₹1,800 Lowest |
| 7.00 | S&F in repair of thermal overload relay of existing size ,make & model suitable for 2.0 ton EOT gantry complete all as specified & directed by Eng-in-Charge. | 2 | Each | 7,000 ₹14,000 | 3,300 ₹6,600 Lowest |
| 8.00 | S & F in repair brake shoe thrust assembly with lining set suitable for main hoist and for vertical drive complete of size 2.0 Ton capacity complete all as specified and directed by the Eng-in-Charge. | 2 | Each | 5,000 ₹10,000 Lowest | 6,000 ₹12,000 |
| 9.00 | S & F of in repair brake liner of electro thruster brake assy for crane capacity of 2.0 ton installed at different location at AF stn udhampur complete all as specified and directed by the Eng-in-charge. | 2 | Each | 8,000 ₹16,000 | 6,000 ₹12,000 Lowest |
| 10.00 | S & F in repair electric motor 415V of capacity 3 HP, 3 Phase suitable for 2 Ton crane including necessary connection, fitting & testing complete all as directed by Engineer-in-charge. | 5 | Each | 7,000 ₹35,000 Lowest | 18,000 ₹90,000 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
16 Jul 2025, 6:00 pmClosed
HQ CWE (AF) Jammu
HQ CWE (AF) Jammu AIR FORCE STATION JAMMU
CA NO CWEAFJ-45/2024-25 REPAIR / MAINT OF EOT CRANE AND OTHER CONNECTED WORKS AT AF STN UDHAMPUR UNDER GE AF UDHAMPUR
2025_MES_699261_2
CWEAFJ-45/2024-25
Open Tender
Civil Works
Item Rate
180 days
Udhampur
As per NIT and Tender documents
8 documents required · 8 mandatory
₹500
GE AF UDHAMPUR
₹50,000
Yes
12 Dec 2025
25 Jun 2025
18 Jul 2025
25 Jun 2025
16 Jul 2025
2 Jul 2025
Amount
Overall accessed maintenance cost for maintenance of electrically operated over head travelling cranes normal (EOT) single girder type of 2.0 tonne capacity installed at outer portion of Bldg No 1, 3, 5, 7,9 & 13 at Air Force Station Udhampur comprising of electric motor for long travel, hoist motion, creeping micro speed and electrical control panel consisting of MCCBs/main switches, step down transformer, contactors, HRC fuses & mechanical wire rope with drum, brake unit, gear boxes, oil levels, motor bed ends, electrical control cables etc & comprising of material, labour and T&P for routine, periodical, preventive maintenance or breakdown repair to EOT crane functional at all time all as specified and directed by the Engr-in-charge.
Overall accessed maintenance cost for maintenance of electrically operated over head travelling cranes Normal (EOT) double girder type of 2.0 tonne capacity installed at inner portion of Bldg No 1, 3, 5, 7,9 & 13 at Air Force Station Udhampur comprising of electric motor for long travel, hoist motion, creeping micro speed and electrical control panel consisting of MCCBs/main switches, step down transformer, contactors, HRC fuses & mechanical wire rope with drum, brake unit, gear boxes, oil levels, motor bed ends, electrical control cables etc & comprising of material, labour and T&P for routine, periodical, preventive maintenance or breakdown repair to make EOT crane functional at all time all as specified and directed by the Engr-in-charge. Note: For Items No 1 & 2 :- (a) All spare parts required during maintenance shall be measured and paid separately. (b) The maintenace of crane throughout the contract period shall be responsibilty of contractor and shall be quoted accordingly. (c) Minor repair/checking fault/Testing/commissoining of work shall deemed to be included in the quoted rate as such under mentioned work :- (i) Motors – Check terminal connections slip rings, carbon bushes alignment of motors, couplings, clutches, breakes if any tight/adjust if required. (iii) Wire Rope – Check lubrication and number of broken wires, Hook – Check for free rotation of hook, lubrication of moving parts. (iii) Electrical – Check contactor tips limit switch operating mechanism including connections & testing of LT panel of crane complete. (iv) Checking of all movement i.e Long Travel, Cross travel/ hoist lifting motion. (v) The record of servicing will be maintained by Contractor, it should be duly signed by user and MES Rep and at the time of payment contractor will produce the same. (vii) Oiling/greasing of bearing of all wheel LT/CT motion mechanism included in the quoted rate. (vii) Cleaning of all parts and rail/wheel of cranes complete all as specified and directed by the Eng-in-charge.
M & L for Load testing of EOT Gantry of 2.0 tonne capacity at 110% of full load including arrangement of dead load all T&P required for testing complete all as specified and directed directed by Engg in charge Note : (i) The load for load testing and shifting arrangement of load will be done by contractor and the rates for the same deemed to be included in quoted rates. (ii) The load testing for LT/CT/hoist motion will be done in the presence of MES Rep and User will be done by contractor and the record of load testing will be maintained duly signed by User and MES Rep.
M&L in repair for brake adjustment of any EOT crane (single guarder/double guarder) of any capacity in presence of user all as specified & directed by th Eng-in-Charge
S&F in repair step down transformer suitable for 1.0 to 2.0 ton EOT gantry complete all as specified & directed by Eng-in-Charge.
S&F in repair single phase preventor suitable for 01 to 2.0 ton EOT gantry complete all as specified & directed by Eng-in-Charge.
S&F in repair of thermal overload relay of existing size ,make & model suitable for 2.0 ton EOT gantry complete all as specified & directed by Eng-in-Charge.
S & F in repair brake shoe thrust assembly with lining set suitable for main hoist and for vertical drive complete of size 2.0 Ton capacity complete all as specified and directed by the Eng-in-Charge.
S & F of in repair brake liner of electro thruster brake assy for crane capacity of 2.0 ton installed at different location at AF stn udhampur complete all as specified and directed by the Eng-in-charge.
S & F in repair electric motor 415V of capacity 3 HP, 3 Phase suitable for 2 Ton crane including necessary connection, fitting & testing complete all as directed by Engineer-in-charge.
S & F in repair electric motor 415V of capacity 5 HP, 3 Phase suitable for 2 Ton crane including necessary connection, fitting & testing complete all as directed by Engineer-in-charge.
S&F in repair flame proof push button for pendant including necessary connection & testing complete all as directed by Engineer-in-charge.
S&F in repair flame proof emergency stop switch for pendant including necessary connection & testing complete all as directed by Engineer-in-charge.
Supply and laying in replacement 4 core, 2.50 Sqmm size flexible copper conductor cable, PVC insulated and sheathed, 1100 volts grade multi stranded suitable for control wiring of control panel for EOT crane complete all as specified by Engineer-in-charge.
Supply and laying in replacement 4 core, 4.00 Sqmm size flexible copper conductor cable, PVC insulated and sheathed, 1100 volts grade multi stranded suitable for box girder between control panel to all motors for EOT crane complete all as specified by Engineer-in-charge.
Supply and laying in replacement 12 core, 4.00 Sqmm size flexible copper conductor cable, PVC insulated and sheathed, 1100 volts grade multi stranded suitable for box girder between control panel to pendent for EOT crane complete all as specified by Engineer-in-charge.
Supply and fix in replacement of LT motion chain guard suitable EOT crane to fix in between LT shaft and LT motion wheel complete all as specified.
Supply and fix in replacement of LT (long travel) CT (cross travel) geared rotary limit switch 3 phase, 415 volts, 50 Hz, upto 2 ton EOT crane with auxiliary contracts or as per existing size and make complete all as specified.
M&L in replacement for panel wiring of EOT cranes capacity up to 2.00 Ton complete including replacement of unserviceable items as per exinting make & size comlepe all as specified and directed.
Supply and fix in replacement of programming card of VFD installed suitable for EOT crane capacity upto 2 Ton complete all as specified and directed
Supply and fix in replacement of LT (long travel) wheels suitable for EOT crane capacity upto 2 Ton as per exinting size complete all as specified and directed
Supply and fix in replacement of CT (cross travel) wheels suitable for EOT crane capacity upto 2 Ton as per exinting size complete all as specified and directed
Supply and fix in replacement of coupling pinion as per sample/existing suitable for EOT as per existing capacity complete all as specified and directed.
Supply and fix in replacement of wire rop 10/8mm suitable for EOT crane capacity upto 2.00 Ton complete all as specified and directed
S & F in repair contactor 3 phase 415 volts of capacity 9 amps suitable for EOT gantry of 02 tonn as required at site of following specifications-
(a) MO-9 ,2NO+NC, 9amps 3 pole power contactor
S&F breaking resister 415 V, 3 phase 2/3/5 HP electric motor and directed all as specified and directed by the Eng-in-charge.
Supply & fixing in repair flame proof pendent suitable for 2 ton capacity gantry complete all as specified and directed by the Eng-in-charge.
Dismantling & taking out gear box 2500/ 2000/ 1000/ 500 Kg capacity electric operated Gantry for rectification of fault and reinstalling the same including replacing of unserviceable bearing, bush, gear,oil seal,gasket etc of existing make and size and testing complete as per site requirement all as specified and directed by the Eng-in-charge. Note :- (i) All T & P and labour required at site will be arranged by the contractor and rate quoted by the contractor is deemed to be included in the quoted rate.
M & L to replace / topping up of thruster brake oil with new brake oil suitable for gantry all as directed by the Engineer-in-charge.
M&L for painting and marking of existing EOT cranes of capacity above 2 Ton including rubbing of existing surfaces two coats of enameled systhetic paint as per existing pattern with alphabet number not less tha 10 mm in different location with complete AOR of GE (AF) udhampur complete all as specified and directed Note : Cost of T&P like ledder, safety belt & other Eqpt required at site shall be include in the unit rate.
M & L for checking electric circuits of any EOT crane & locating the fault, rectifying the fault and replacing the unserviceable parts if required and ensuring functionality of EOT cranes. Note : Defective/unserviceable parts to be measured and paid seperately under relevant intems
LUXMI ELECTRONIC WORKS (BID ID -3352750)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .