Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹11.7 L+₹22,052.25 (1.92%)Rejected-Finance 63 BAJMASTA RAMBAN | RAMBAN | RAMBAN | JAMMU AND KASHMIR | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹13.0 L+₹1.5 L (13.5%)Rejected-Finance 104 SECTOR 4 PANCHKULA HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134112 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹13.7 L
EMD Value
₹27,400
Closing Date
23 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I) 873 EWS
Garrison Engineer (Indep) 873 Engineer Works Section PIN 913 873 C/O 56 APO
SPL REPAIR OF BUILDING NO T-98 (2 X BLOCK OF 4 WC AND 3 X BLOCK OF 4 BATHROOM) AND SR TO EXISTING UNSV SECURITY LIGHTS AND STREET LIGHTS AT MARATHA LI UNDER GE (I) 873 EWS
2023_MES_610388_1
NIT-41 of 2023-2024
Open Tender
Civil Works
Item Rate
240 days
Bhaderwah
As per NIT
7 documents required · 7 mandatory
₹500
GE(I) 873 EWS
₹27,400
20 Sept 2023
24 Jul 2023
25 Aug 2023
24 Jul 2023
23 Aug 2023
8 Aug 2023
Amount
Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified and directed.
Rendering 15mm thick in cement mortar 1:6 on other than fair face of brickwork /concrete surfacses, finished even and smooth without using extra cement, complete all as specified and directed
15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer,s instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid seprately.
Supply only integral water proofing compound, complete all as specifed.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and disposal of unserviceable material, debris and rubbish to outside cantt area complete all as specified and directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.
Brick work with sub-class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick, built in cement mortar 1:4, complete all as specified & directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish to outside cantt area complete all as specified and directed.
75 mm thick plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, path/ hardstanding and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.
Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrte bedding, PVC 'P' or 'S' trap 100mm dia, connection to trap and fushing pipe, anti syphonage, fixed in repairs complete all as specified and directed.
PVC valve less syphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints, fixed in repairs complete all as specified and directed.
Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling including cutting for and pinning in ends of brackets or erecting stand etc., fixed in repair complete all as specified and directed.
Bib taps 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed.
Stop/angle valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.
Conceled Stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.
PVC connection 15mm size with length 450mm with PTMT nuts fixed in repair, complete all as specified and directed.
Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs all as specified & directed
Grating square 150 mm size of PTMT (Minimum weight 100gms), fixed in repair complete all as specified.
Dismantling of existing water tank capacity 1000 ltrs complete all as specified and directed.
Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity complete all as specified and directed.
PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.
Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.
Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs complete all as specified.
Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off outside cantt area complete all as specified and directed.
Non skid coloured ceramic tiles 7 - 8 mm thick area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
Glazed ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Square metre each including taking out hold fast complete all as specified and directed.
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.
30mm thick factory made solid panel PVC door shutter conforming as per IS-4020 made from MS tube of 19 Gauge thickness of size 19 x 19mm style and 15 x 15mm for rail covered with heat moulded PVC channel of 5mm thick and 75mm, 125mm, 125mm wide for top rail, lock rail and bottom rail on either side at 5mm thick 20mm wide cross PVC sheet of gap inserted for top rail and bottom rail, paneling of 5mm PVC sheet fitted in MS frame welded/sealed to the style at rail with 30mm wide, 5mm thick PVC sheet beading sides and jointed together with solvent cement adhesive etc including aluminimum mongry complete all as specified and directed. Make :- Rajshree/Kumar Arch
Steel ventilator with top hung shutters including projecting type hinges with steel handle, and steel peg stay complete all as specified.
3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22, 75mm long, complete all as specified.
Aluminium anodised, barrel tower bolts of extruded section of size 100mm ISI marked and fixed, complete all as specified and directed.
Extruded aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 300mm long, complete all as specified.
Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.
15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
Fixing only 15mm dia GI steel water tubing, medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.
20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
Fixing only 20mm dia GI steel water tubing, medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.
PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.
PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors/weep holes, complete all as specified & directed.
110mm bore PVC (SWR) bends any radius, complete all as specified.
75mm bore PVC (SWR) bends any radius, complete all as specified.
75mm bore PVC (SWR) vent cowl complete all as specified.
32mm bore PVC flush pipe for wash basin, low level cistern, sink and urinal -01 meter long complete all as specified & directed.
Prepration of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
Two coat of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete, all as specified.
Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.
Pre-painted gaivalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpsa as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in through PVC casing and capping and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or exhaust fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including making good to disturbed surfaces of wall / floor, complete all as specified and directed.
All as per the description of Serial Item No 56 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.
All as per the description of Serial Item No 56 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and directed.
All as per the description of Serial Item No 56 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Switch piano, flush type, 5/6 Amps, single pole, one way, complete all as specified and directed.
Socket out let 3 pin 5/6 Amp, piano flush type, 240 volts, complete all as specified and directed.
Socket out let, 5 pin, 5 &15 Amp, piano flush type, 240 volts complete all as specified and directed.
Switch piano flush type, 15 Amp, 240 volts complete all as specified and directed.
LED light fitting 1x20 watt, 220V, (1150x24x35mm) AC decorative box type with driver, holder including LED tube light connecting up cable of copper conductor size 3-core, 23/0.0076 from ceiling rose to light fitting connector complete all as specified and directed. Make :- HAVELL's Cat No LUMILINEBS20WLED840SPCWH or equivalent in Crompton / Philips / Syska
LED light fitting 1x9W/1x10W bulk head luminaires including LED light driver holder connercting up with three core flexible copper conductor cable of suitable size 230V,50 HZ all as specified and directed.
LED light fitting 10W (600x24x35 mm) Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver prewired with all accessories and including connecting electrically to celing rose using PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 sq mm all as Cat Part No LUMILINEBS10WLED865SPCWH . Make :- Havells/Crompton /Philips/Syska
Exhaust fan with louvers of size 300mm sweep, 900 RPM, 230 volts (single phase) complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed
Ceiling rose surface bakelite three terminals 240 volts complete all as specified and directed.
Blank
Sheet metal enclosure (factory made) double door for distribution board (when MCB's are to be used) Single pole neutral 240 V, 4 ways with 200 Amp rated busbar connecting with suitable size of thimbles and including taking down all as specified and directed.
MCB SP 5-32 Amps 'B' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete including taking down all as specified and directed. Make : C&S, Havells, Indoasian, ABB
MCB SPN 40 to 63 Amps 'C' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete taking down all as specified and directed. Make : C&S, Havells, Indoasian, ABB
1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 16 sqmm stranded conductor, complete complete all as specified and directed.
Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed Note : Punned thickness of 18cms shall be measured for payment.
Supply and laying brick covering with width equal to length of bricks as mechanical protection to underground cable using old size sub class 'B' bricks, laid flat size 230mm x 115mm x 75 mm with width of brick perpendicular to length of cable, all as specified and directed.
Laying only serviceable bricks as mechanical protection to underground cable with width equal to length of bricks, width of brick perpendicular to length of cable, all as specified and directed.
Painting of steel tubular pole any type with cross arms with one coat of aluminium paint after preparation of surfaces of pole / cross arms by scrapping of old paint, cleaning of all rusted surface and painting upto 1.5metre above PCC coping in black and white strips 05 Nos of 30cms each starting from the bottom of the pole and two coats epoxy based paint aluminium grade finish to the remaining external surface of pole and cross arms structure over one coat of primer and marking of MES No complete all as specified and directed.
XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 16 Sqmm 4 core on wall including taking down old cable, complete all as specified and directed.
Street Light fitting 60 Watts LED made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65/66 protection and impact resistance of IK07 with 10KV built-in surge protection device including taking down old unserviceable Street Light Fitting any type complete, all as specified and as directed. Make : Havells/ Wipro / Philips / Crompton NOTE: CA NO shall be marked on each fitting with permanent marker before fixing and properly bound register shall be maintained for defect liablity period.
Pole mounting bracket made out of medium grade GI pipe of 40mm dia, bent to 600 required shape of length 1.2 mtr with two No's of flat iron clamps made out of 40 x 5mm with 12mm dia bolts, nuts & washers duly painted with aluminium paint over a coat of primer including taking down old unserviceable brackets all as specified and directed.
PVC insulated copper conductor 2.5 Sqmm for connecting Street Light fitting to DB passing into the pole complete including taking down old unserviceable cable all as specified and as directed.
Tubing, medium grade, galvanised, 40 mm dia for cable protection with all fittings and fixed complete to walls and ceiling or laid in floors/road crossing all as specified and directed.
PVC junction box of size 250mm x 250 mm x 160 mm with hinged type door and 2 Nos terminal 20 Amps MCB, fixed on pole withnecessry fixing arrengment such as nuts, bolts, washers, clamps, etc complete, fixed in repair all as specified and as directed. (Make- Sintex cat part No GSJB-2520 or equivalent)
Bus bar panel, size 0.80m x 0.40m x 0.40m, Kiosk outdoor type, CPRI type tested, LT 440 Volts, 50 Hz, TP, 4 wire supply, Floor mounted factory fabricated weather and vermin proof made out of 3.15 mm thick MS CRCA Sheet on angle iron 30 x 30 x 4mm with front opening door, handle type locking arrangement powder coated internally and externally shall have channel base of appropriate size and mounted on PCC foundation of size as required or approved by manufacturers in PCC 1:3:6 Type C-2 including earth work complete with bus bar chamber comprising 4 Nos aluminium strip bus bars PVC insulated of rating 200 Amp, PVC sheathed with colour coding, fixed in repairs complete all as specified and directed.
M S BANSI LAL CONSTRUCTION CO
A S CONSTRUCTION
Bidder Name
M S BANSI LAL CONSTRUCTION CO
R C TRADERS
A S CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .