CERTAIN BR COMPREHENSIVE REPAIR WORK TO SMQS AND OMQS UNDER AGE BR II OF GE AF ADM AREA AT AF STATION AGRA

Amount

M&L for brick work with fly ash bricks, old size, class designation 75 Kgf/cm2, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC @ 2 % by weight of cement finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).

M&L for rendering 15 mm thick on brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on concrete surfaces of ceiling with CM (1:3) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer on new surfaces of walls including preparation of surface complete all as specified and directed.

M&L for applying and two coats of distemper oil emulsion over a coat of primer over wall care putty minimum 1 mm thick on new surfaces of walls including preparation of surface complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new surface complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.

Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for green marble work (Baroda green) 18-20 mm thick (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match with and rounding the outer edges and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for granite stone 20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like including rounding of outer edges set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match with and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone 18 to 22 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and mirror finish polishing with & including rendering 15 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed.

M&L for 75mm thick cement concrete type C1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction including demolition of existing plinth protection complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 x 200 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 on other than fair faces of brick wall finished rough to fix tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 on other than fair faces of brick wall finished rough to fix tiles complete all as specified and directed.

M&L for averaging 25 mm thick cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in levelling / maintaining slope in floors or pavings etc. complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) on vertical surface such as skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:3 and complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick polished on vertical surface such as skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:3 and complete all as specified and directed.

Renewing glazed/non skid ceramic tiles in patches area n exc. 5 Sqm including preparing the beds and laying of old or new tiles white/ coloured, setting jointing and pointing etc to match with the existing surfaces complete all as specified and directed.

S&F in repair 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc. and fixed with 'L' or 'J' type hook or cranked hook bolts complete all as specified and directed.

S&F in repair 6 mm thick asbestos cement two pieces adjustable plain wing ridge and fixed with 'L' or 'J' type hook or cranked hook bolts complete all as specified and directed.

S&F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600 mm with GI frame work of main runner 38 x 24 mm sheet thickness 0.4 mm, cross tee 28 x 24 mm sheet thickness 0.3 mm and wall angle 24 x 24 x 0.3 mm including 4 mm thick non asbestos fibre cement bldg disigner board conforming IS-14862 type B cat 3 of oceanic texture and ivory colour of size 595 mm x 595 mm to be placed in the grid suspended by 4 mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips complete all as specified and directed.

M&L for welding in repair exc. 2.5 cm but not exc. 5 cm in length, thickness of metal to be welded exc. 6 mm but not exc. 9 mm complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

S&F in repair 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair stop valves 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed .

S&F in repair long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair chromium plated brass shower rose 125 mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified.

S&F in repair pillar taps, cast copper alloy with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets, one number 15 mm bore pillar taps, cast copper alloy, fancy type, chromium plated, 32 mm dia PTMT waste coupling, waste pipe and 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed.

S&F in repair Viterous China wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32 mm dia 90 cm long fixed properly to inlet of WC, 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer and making good to disturbed surfaces of wall or floor complete all as specified and directed.

S&F in repair tripple layer rotational moulded polyethylene water storage tanks white colour 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repair tripple layer rotational moulded polyethylene water storage tanks white colour 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repair central hole basin/sink mixer, fancy type, brass chromium plated, with round spout with popup waste system, including plugging and fixed, suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair 15 mm dia chromium plated brass wall mixture for mixing hot and cold water sutable for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair flushing C P/ S.S jet nozzle (jet spray) for pedestal pattern EWC with upto 1 m long flexible pipe, S.S triangular plate and CP brass nuts and washer etc. complete all as specified and directed.

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with 1.25 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair stainless steel grating doom with or without hole 100/125 mm dia complete all as specified and as directed.

S&F in repair ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repair sheet glass corner glass shelf 3 tier assembly consisting of 5.5 mm thick toughen glass 15 mm average radius shelf with chromium plated bracket guard and railing and fixed with CP screws complete all as specified and directed.

S&F in repair 1 mm thick stainless steel plate rack over all size 750 x 600 x 250 mm of standard pattern and make as approved by GE complete all as directed.

S&F in repair 1 mm thick stainless steel plate rack over all size 900 x 750 x 250 mm of standard pattern and make as approved by GE complete all as directed.

S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 600 mm long between flanges fixed with rawl plug complete all as specified and directed.

S&F in repair CP brass towel ring with bracket, round shape, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F in repair PVC semi rigid waste pipe 32 mm dia with socket minimum 700 mm long for WHB/ sink/ urinal complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

S&F in repair PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

S&F in repair sink with draining board made of stainless steel 1mm thick with plugs, washers, waste pipe and coupling overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair soap dish, brass chromium plated, oval shaped of size 100x50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 Sqm and n. exc. 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm & n. exc 2 Sqm each complete all as specified and directed

S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded wood grain PVC 'C' channel having wood grain PVC sheet and 5 mm thick and 15 mm wide PVC sheet beading strip of 20mm width stuck inside with solvent cement for stiles and Wood grain PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of wood grain PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with decorative PVC beading of 10mm x 10 mm (900) and jointed together with solvent cement complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 2nd class hard wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F Box type steel windows/ventilators with side hung shutters with glazed and gauzed double panel shutters both provisions including box type hinges or factory made butt hinges with steel handle, tower bolts, hold fasts and steel peg stays etc. complete without glazing bars dovetailed or welded and 10mm square guard bars @ 125mm c/c both way complete as per drg No. CE/ALD/TD-172 sheet No 1/2 to 2/2 complete all as specified and directed. Note: PCC for fixing holdfast, wire cloth and glass shall be measured and paid separately.

S&F mild steel framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in copings, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F 100 mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed.

S&F alumunium handle, cast type, anodised 150 mm long ISI marked complete all as specified and directed.

S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and fixing to aluminium door/window with aluminium srtip, rubber packing, fillets or beads or with rivets/pins etc. in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F figured glass, 3 mm thick, pin head type and glazing with oil putty or wooden beads in squares exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M/S SINGH ELECTRIC CO

J P CONTRACTORS AND SUPPLIERS

saroj constructions

Mohd Gulab Hussain

M/s Shiv Builders

Asha Construction