Repair/Renovation of Special Bungalow No. 9 at Gandhi Nagar Jammu. CNO-599 NP

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing/ fixing brass name plate 2'x1' with complete job

Providing/ fixing glass name plate 2'x1' with complete Job

Providing and laying in position Cement Concrete of specified grade excluding the cost of centring and shuttering, all work ypto plinth level (1:3:6) 1 cement:3 coarse sand:6 graded stone aggreagate 20mm nominal size (crusher)

Providing and fixing of PCP Sumo pannel 12mm to 15mm thick (wall panelling) approved make / quality including highlighter fixing carriage etc.

Providin/ fixing wall paper of specified shade and patteren as per direction EIC

Providing and laying Ceramic glazed floor tiles 2' x4' of 1st quality of approved make, somany ,kajaria,orient,laid on 20mm thick bedofcement mortar1:4 (1cement: coarsesand)including pointing the joints with white cement and matching pigment etc., complete. LMR

Providing and laying Ceramic glazed wall tiles 2' x 4' of 1st quality of approved make, somany ,kajaria,orient, laid on 12mm thick bed of cement mortar 1:4 1cement: 4coarsesand)including pointing the joints with white cement and matching pigment etc., complete LMR

Providing/ fixing of PVC Pipes Single socketed pipes 75 mm diameter

Providing/ fixing of PVC Pipes Single socketed pipes 110 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints 19.3.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15mm nominal outer dia pipes

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nomi nal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing/ fixing of alluminium partation including cost of material as per direction of EIC

Providing/ fixing of wall clading tile in different colour laid over 12mm thick bed of cement mortar 1:3 miix including pointing in matching pigmment complete job.

Providing and fixing of following Sanitary items fittings of approved make / specification as directed by E.I.C (Cera, Jaquar, Hindware or equivalent ). Providing and fixing of angular stop cock with complete

Providing and fixing of short Body Bib Cock

Providing and fixing of long nose

Soap Dish Holder

Soap Dispenser bottle

Providing and fixing of concealed body single lever high flow divertor including making all connections and making good the walls

Providing and fixing of CP Brass angle valve of approved make / specification as directed by E.I.C (Cera, Jaquar, Hindware or equivalent )

providing and fixing of wall bend mixer/ Sink Mixer of jaquar, cera or essco

Providing and fixing of central hole basin mixer of jaquar, cera or essco

Providing and fixing of Single Towel Rail 600mm of jaquar, cera or essco

Providing and fixing of Towel Ring Square of jaquar, cera or essco

Providing and fixing of over head shower 150x150 of jaquar, cera or essco

Providing and fixing of Hand shower of jaquar, cera or essco

PROVIDING AND FIXING OF WALL HUNG BASIN WITH PEDESTAL COMPLETE.

corner glass shelf set of 3

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

White vitreous china single piece, double traps syphonicwater closet of approved brand /make, shape, size and pattern i ncluding integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings ,nuts, bolt sandgasketetc including making connection with existing P/Strap, complete in all respect as per directions of Engineerin- Charge

providing and fixing of cubical tuffen glass partition

Providing and fixing toilet paper holder C.P. brass

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

C.P. Grating

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood : 30mm thick

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: Second class deodar wood

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 6 mm ply (Archid, Century, green

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 19 mm ply (Archid, Century, green )

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 0.8 mm thick Sunmica (Virgo )

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 1 mm thick Sunmica (Virgo )

Providing and fixing of following hardware items fittings of approved make / specification as directed by E.I.C. MULTIPURPOSE LOCK

S.S. hinges 3"

S.S. hinges 4"

Folding handles 6"

Sliding channel 20"

S.S. handle 6"

Edge tape 20mm

auto hinges

hydraulic hinges

steel pawa 4''

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 300x10 mm

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 9.98.1 300x16 mm

proving &fixing ISI marked almunium hanging floor door stoper ,ISI marked andized with neceesay screw etc complete single rubber stopper

providing and fixing of SS curtain rod along with brackets , wall to wall fittings with complete job

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :

P/F OF TOUGHEN GLASS COMPLETE FITTING AND STEEL ACCESSORIES. 12mm thick

8mm thick

5mm thick

labour for shifting of debries /mulba from roof ,stairs momties etc and adjoining area of blocks to the dumping sites by engaging labours and other miscellenous works

carpenter helper

mortice latch and lock

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Arer of slab over 0.5 sqm

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Providing and fixing of modular kitchen accessorles of of approved specification incl carriage and fixing complete. SS Multi purpose basket 15''x20''x4''

SS Multi purpose basket 15''20''x6''

SS Multi purpose basket 15''x20''x8''

SS Multi purpose basket 15''x20''x12''

SS masnal pullout 15''x18''x18''

SS Cuttlery basket 15''x20''x4''

SS Thali basket 15''x20''x18''

SS double sink quality and size as per EIC

p/fixing of flush door of approved make fixed with 1mm mica on both side including all fiiting and locks

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick

1mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Finishing walls with Acrylic smooth exterior paint of required shade: 13.119.1 Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Engage Trolley for shifting of mulba from site to outer area of municipality

Please Enable Macros to View BoQ information