2024-25 -15th Finance Commission 2nd Installment

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification . for Foundations SS 20B

Supply delivery and filling of M- Sand in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyence of sand to Site and all labour charges and all other incidential charges etc,. complete as per Standard Specification

Cement concrete of mix 1:4:8(One part cement four part of M- sand and eight part of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. UP TO BASEMENT

RCC 1:1½:3 (One part of cement , one and half part of M-sand and three part of aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering , Centering and cost of Reinforcement grills but including curing ,finishing etc complete with standard specification and as directed by Engineer incharge. - Above basement

Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30 - Column

Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department officials.-

Special Plastering with cement mortar 1:3 (One cement three P-sand) 10mm thick including cost and conveyance of materials to site and including all labour charges etc complete.

Supplying and fixing of RCC Jally including cost and conveyance of all materials labour charges etc complete as per standard specification

Providing two legged scaffolding using 15cm dia blue-gum posts of 4.0m overall length (3M HT + 0.5M projection + 0.5m into ground) the distance between two rows being 1.25m and the spacing of postsbeling 2.0m and the spacing of postsbeling 2.0m in both the rows with two horizontal posts with 0.5m overlap on either sideand braces at 2m c/cincluding longitudinal and transverse middle braces to step up and providing aplatform with country woodplanksof 40mm tk & 1.0m width in a complete form using colr and nalls - 1.0m run -- FOR REJUVENATION WORKS -First level @ upto 0 to 3.00m height

Second level @ 3.00m to 5.50m

Third level @ 5.50m to 8.00m

Fourth level @ 8.00m to 10.50m

Fifth level @ 10.50m to 13.00m

Sixth level @13.00m to 15.50m

Seventh level @ 15.50 m to 18.00

Thorough scrapping of old plastered surface including cost and conveyance of all materials and labour charges etc complete.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification.

supply and delivery of 10 HP three phase Submersible pumpset of duty condition 20 lpm x 150 m as per IS 8034 without panel board etc complete as per standard specification.

supply and delivery of 7.5 HP three phase Submersible pumpset of duty condition 20 lpm x 150 m as per IS 8034 without panel board etc complete as per standard specification.

s SATHIYARAJA (BID ID -1266497)