Construction of compound wall around the recreation stage at Shanmugapuram

Amount

CODE NO.2.8.1 - Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

CODE NO.4.1.10 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement : 5coarse sand : 10 graded stone aggregate 40mm nominal size)

CODE NO.5.1.2 - Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

CODE NO. 5.2.2 - Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

CODE NO.5.9.5 - Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams , girders , bressumers and catilevers.

CODE NO.5.9.6 - Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts.

CODE NO.5.22.6 - Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level – Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more.

CODE NO. 6.1.2 - Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in – cement mortar 1:6 (1 cement : 6 coarse sand)

CODE NO. 6.4.2 - Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)

CODE NO: 6.13.2 - Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level – cement mortar 1:4 (1 cement : 4 coarse sand)

CODE NO: 6.15 - Extra for providing and placing in position 2 nos 6mm dia M.S.bars at every third course of half brick masonry)

CODE NO.10.25.2 - Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required – in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

CODE NO: 13.8.3 - 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand)

CODE NO. 13.44.1 - Finishing walls with water proofing cement paint of required shade - New work (Two or more coats applied @ 3.84 kg / 10 sqm)

CODE NO. 13.50.3 - Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron / steel works

CODE NO. 13.61.1 - Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

Prebagar

AGPconstruction