Karnataka

Active

Works

Buildings

Providing and fixing Wardrobe, Repairs to Aluminium Windows, Prevension of Leakage, carriying out Painting, Repairs to Plaster, and other repair works to the newly alloted C & D Type Quarters, Koramangala, Bengaluru

Public Works Department

PWD No.2 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 2 Jul 2026Due tomorrow

Tender Value

Refer Docs

EMD Value

₹20,400

Closing Date

2 Jul 2026, 10:00 pmDue tomorrow

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

Providing and fixing Wardrobe, Repairs to Aluminium Windows, Prevension of Leakage, carriying out Painting, Repairs to Plaster, and other repair works to the newly alloted C & D Type Quarters, Koramangala, Bengaluru

Tender Information

Tender ID

309071

Reference Number

PWD/2026-27/BD/WORK_INDENT37037

Tender Type

Open

Product Category

Buildings

Location

PWD No.2 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate and UDIN NO should be mentioned certified from CA

Requiredvalid kpwd license Class iv & above

RequiredValid G.S.T. Registration Certificate

RequiredAssessed bid capacity

RequiredWork done certificate issued by the competant authority of rank not less than Executive Engineer

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Valid KPWD Class IV Civil License & above

Valid License obtained with the Labour Department to be enclosed

Conditional tenders will not be accepted

Tenderer should have Provided Valid copy of Group Insurance policy for Labors /employees

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The employer is not responsible for any delay in accessing E - Procurement Portal

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

All scanned documents to be uploaded shall be in original, Submit the original document at the time of technical bid opening or next day and the Executive Engineer reserves the right to verify the original documents before approval

If any, additional information required, the same may be obtained from the office of the Executive Engineer, PWD, No. 2 Building Division, Bangalore during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a General Holiday, the next working day will be considered

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The contractors assessed available tender capacity shall be more than the tender value, it will be calculated as per the Standard tender document Attached. Ongoing works list/commitments self attested to be uploaded.

The Tender processing fee shall not be refundable

Contractor should follow strictly the prevailing rules of labour laws and minimum wages act

The Bidder shall not furnish any fake/fabricated/false information or withhold facts etc., if the bidder is found to have violated any of these above (found either during evaluation or after awarding the tender), the tender shall be rejected and action as per rules and regulations shall be taken against the Bidder

If the Successful Bidder has quoted lesser rates than the estimated rates then he should remit the Unbalanced Tender Amount along with the Security Deposit within the stipulated time as that shall be specified in the Letter of Acceptance, failing which the tender of the Successful Bidder shall be rejected

Terms and condition of Contract as per Approved Standard Tender Document KW-1/2

The quoted rates by the bidder shall be EXCLUDING GST

Valid G.S.T. Registration Certificate

Tenderer Shall note, that the tenderers those found eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers(ITT) will only be considered for further evaluation

Bidder Should upload the bid capacity calculated as per KW-1 Tender condition, the statements showing the value of existing commitment and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the employer in charge, not below the rank of an Executive Engineer or Equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 b)Satisfactory completion as prime contractor in similar construction works to an extent of 50% of the cost of the work i.e. Rs 4.06 Lakhs

Work Done Certificate

Capabilities of Vendor

valid kpwd license Class iv & above

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.8.13 lakhs

Audited CA Certificate of Annual Turnover

Others

G S T Certificate

GST Registration

3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx2.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 12 month. B is Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 12 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- bid capacity

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹20,400

Important Dates

Last Activity

25 Jun 2026

Published

25 Jun 2026

Bid Opening

4 Jul 2026

Download Ends

29 Jun 2026

BOQ Preview

•

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...

•

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per directi...

•

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into bloc...

•

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Dubbing out on old irregular walls average 10mm thick and making good the surface with cement mortar 1:3 including curing cost of materials, labour, complete as per specifications.

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...

•

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing PTMT grating of approved quality and colour.- Circular type - 100 mm nominal dia

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

•

Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - cl...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

•

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

•

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

•

Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 107 mm long, weighing not less than 110 g

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Removing white or colour wash by scrapping and sand papering and pre- paring the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of En...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Treating mild Dampness in Interior walls - Providing and Applying Acrylic Co Polymer single component specially designed waterproof protective coating that prevents damp patches on walls without any d...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...

•

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

•

Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

•

Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with scre...

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length

•

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 40mm

•

Repair to existing ply wood ward-robes with 19mm plywood, beading,laminate and all necessary including cost of materials labour, lead, complete as per specifications.

•

Repairing door and window frames with available wood to the required

•

Removing the glazed tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete includ...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1 GENERAL 37037.docx

Tender Document • 1.34 MB

Ready to Participate?

Download all tender documents and submit your bid