SPECIAL REPAIRS TO P-25 (03 LTCDR MD DUS) AT INS HAMLA UNDER GE(NW) BHANDUP

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified .

M&L for PCC 30mm thick type B0, 1 : 2 : 4 (12.5 mm graded aggregate) in sub flooring complete all as specified and directed..

M&L for vitrified ceramic tiles 10mm thick light shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including provision of cement screed bedding layer 20 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

All as per item No.4 above but light shade but over and including provision of screed bedding 10mm thick in CM 1 : 3 in vertical surface complete all as specified and directed.

M&L for glazed ceramic jointless coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of backing layer 10mm thick in CM 1 : 3 complete all as specified and directed.

Material and Labour for non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not excceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified.

M&L for Marble work other than white or black/Baroda green 18 to 20 mm thick (table rubbed and polished) in cooking platforms, jambs and like over and including provision of 20mm thick cement mortar (1:4) including pointing in colour cement (1 :2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. .

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick in (1:3) cm on fair faces of ceiling and other RCC surface of any location and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 20mm thick in (1:4) cm (in two coats (15+5mm) with both coats mixed with liquid water proofing compound, surface finished even and fair without using extra cement (WPC will be measured separately).

Supply only liquid water proofing compound.

Labour only for complete removal of existing treatment on walls including washing / rubbing down with water including necessary scaffoldings etc complete all as specified .

Labour only for complete removal of existing treatment on ceiling including washing / rubbing down with water including necessary scaffoldings etc complete all as specified .

M&L for applying 3 mm thick coat of white cement based wall care putty on wall surfaces of any description finished even and smooth complete all as specified and directed.

M&L for applying 3 mm thick coat of white cement based wall care putty on Ceiling surfaces of any description finished even and smooth complete all as specified and directed.

M&L for two coats of oil bound distemper including preparation of plastered surface of wall, necessary scaffoldings etc complete all as specified

M&L for preparation and two coats of colour wash on ceiling surfaces including necessary scaffoldings etc complete all as specified

M&L for leakage / seepage proof coating consisting of preparing the new surfaces of existing exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed. Note: The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.

M&L for leakage / seepage proof coating consisting of preparing the old surfaces of existing exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed. Note: The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.

Taking down chowkhats or frame with shutters (without taking off shutter from the frames) including grills etc where existing, exceeding 1.5 sqm but n exc 4 sqm completed as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutter from the frames not exceeding 1.5 Sq. M each complete all as specified and directed.

Taking down shutter of any description exc 1.00 but n exct 2.00 sqm each Sqm each complete all as specified and directed.

Taking down door / window shutter with grills of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed.

S&F extruded Powder coated aluminium section as in window, ventilation,door,particians (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed (Make: Jindal/Hindalco) Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and wire cloth measured and paid under supply only rate.

S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick complete all as specified and directed.

Supply only sheet glass 4.8 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F II nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed.

S&F MS flat iron as in hold fast and similar work as specified Gde Fe 290 Gde E-165 complete all as specified and directed.

M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed.

M&L Plain framed,35 mm thick panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm II nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats.

S&F stainless steel butt hinges 100mm size complete all as specified and directed.

S&F 150mm length extruded aluminium alloy handles,fabricated type, anodised complete all as specified and directed.

S&F150 mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

M&L 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and directed..

S&F Push spring type stainless steel floor door stopper complete all as specified and directed.

M&L for preparation of new wood and wood based surfaes any description, not otherwise described oer 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces complete all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

Supply and fixing in repair Tubular towel rail/ curtain rod 20mm dia Aluminium anodised & fixed in repairs complete all as specified and directed.

S&F in repairs Aluminium brackets for towel rail/ curtain rod 20mm dia complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.

S&F 75mm bore PVC soil waste pipe pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F 110mm bore PVC soil waste pipe pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S & F 110 mm bore PVC (SWR) Branch piece, single (single Y) equal or unequal of any radius with access door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S & F 110 mm PVC (SWR) junction double, (double T), equal or unequal with access door in repairs complete all as specified and directed

S & F 75 mm PVC (SWR) junction double, (double T), equal or unequal with access door in repairs complete all as specified and directed

S& F Stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm bore dia complete all as specified.

S& F Stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore dia complete all as specified.

S&F 32mm bore Low Density Polyethylene pipes (LDPE) of pressure rating 6Kg /cm2 along walls, ceiling or floors etc, complete all as specified and as directed.

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force 2)

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for providing mild steel TMT bars in 10mm & over various structural RCC elements like column, beams and Slab etc. including cutting, bending, fixing the bars, tying with binding wires etc. complete all as specified and directed. Note: (1) Anchoring of reinforcement bars will be measured and paid seperately. (2) This item is applicable for new RCC and also for additional bars required in the existing RCC structures.

M&L for carry out application of ‘Bi-polar migratory corrosion inhibitor' (Make : M/s. Krishna Conchem (EPCO KP-100) / BASF (Protectsil CIT)) on RCC surfaces complete all as specified and directed.

M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for providing Polymer Bonding Agent of Make M/s. Krishna Conchem (MONOBOND) OR Fosroc (NITOBOND-SBR) OR equivalent brand of Dr. Fixit,as approved by the GE followed by flexible polymer based putty ( 1cement: 1.2 finesand :20% polymer by weight of cement : water as required ) on cracks after cutting the cracks to a 'V' shaped groove upto 10 mm wide and 10 mm deep in structural RCC members , finished with spatula etc. complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressedRCC members (exceeding 40mm in thikness) with prebatched, prepacked, single component ready to use microconcrete from M/s. Krishna Conchem (Molith MC) or equivalent of Dr. Fixit as approved by GE at any level and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications complete all as specified and directed.(Note : Reinforcement only shall be measured and paid separately).

M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness including levelling, profiling etc complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified from M/s Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr. Fixit, exceeding 20mm thick and not exceeding 40mm thick in two layers each of equal thickness including levelling, profilling etc complete all as specified and directed.

M&L for anchoring & welding reinforcement bar in existing RCC member by providing holes of minimum 10d depth for bars upto 16 mm dia and grouting in position with locfix (fosroc), including drilling of holes, cleaning etc. complete all as specified and directed, Note:-reinforcement will be measured and paid for separately.

M&L Two coat of synthetic enamel paint over a coat of red oxide primer to new steel surface including preparation complete all as specified and directed.

Demoltion of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facing, precast concrete articles.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6.

M&L for 50mm thick Pcc (1:3:6), type C2, using 20mm graded stone aggregate as in plinth protection / paving, surfae finished even & smooth without using extra cement complete as specified and directed.

Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for providing stages wise waterproofing treatment to sunken portion of toilets as under. Stage 1: Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debries outside MD land etc complete all as specified and directed. Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of STP Ltd in the proportion /quantity all as per manufactures instructions. Stage 3 : Primer - Mix Tarfelt LM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces. Stage 4 : Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brush all as per manufactures instructions. Stage 5: Laying 50 GSM fyber glass cloth over the 1st coat while the coated surface is still tacky. Stage 6: After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with water of STP Ltd by brush as per manufactures instructions.@1kg /Sqm. Stage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions.

M&L WC connector 110 mm PVC SWR for WC complete all as specified and directed.

Supply only PVC connector 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L for PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed.

M&L for Stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 75mm dia of outlet complete all as specified and directed.

S&F 40mm bore high density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc.

S&F toilet paper holder brass chromium plated complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with Plastic water closet seat, black, closed pattern withflat bottom, and cover and mild steel chromiumplated or aluminised hinging device all as specified and directed.

M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

M&L stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

S&F Hot & Cold mixer for tap and shower connected to pipes with fittings of approved make complete all as specified and directed

S&F in repairs brass chromium plated towel rail 20mm dia,complete all as specified and directed

S&F stainless steel soap dishes approximate size 160mm x 160mm x90mm as complete as specified as directed by Engineer-in-Charge.

M&L Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed..

M&L Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed.

M&L Hat and coat hooks, solid body of aluminium, 175mm to 250mm long and fixed in repairs complete all as specified and directed.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

Taking up or down steel tubing 20mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

Taking up or down steel tubing 40mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia. complete all as specified and directed.

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 20mm bore dia. complete all as specified and directed.

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 40mm bore dia. complete all as specified and directed.

Cutting chases, pinning in brick wall, making good to facins where required and pointing in cement mortar 1 : 3 to ends of edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc, making good, cutting not exc 10cm girth complete all as specified and directed.

S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 40 mm in repairs complete all as specified and directed.

M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs all as specified of 2000 ltrs capacity complete all as specified and directed..

M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete .25mm dia complete all as specified and directed.

M&L Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 20mm bore dia complete all as specified and directed

S&F in repairs 15mm bore dia angle cock Chromium plated complete all as specified and directed.

M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L for granite 18 to 20mm thick (of any type) table rubbed and polished) as in floor such as steps, window cills/jambs, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed.

S 7 F in repairs to 9 feet pully operated cloth drying system, aluminium anodised 20 mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material etc complete all as specified and directed . Make;-Easy Dry or equivallent make, sample as approved be GE.

M&L Aluminium (extruded section) body door closer in repairs hydraulically regulated, designation No 3, universal type,suitable for door shuutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

M&L in repairs Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed

Supply only 15 mm Pillar taps, cast copper alloy Fancy type, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed all as specified and directed.

M&L for Flush cutting of Rcc chajjas, fins with reinforcement up to 150 mm depth by norms of Rcc mechanical cutting machine, all as specified.

S&F premoulded FRP Chajjas with 2 to 2.5 mm FRP thickness on both sides with manglore clay type finished with 150 mm drop on front, sides and 60 mm collar on back side including necessary fixtures complete all as directed.

M&L for post construction anti- termite treatment along the external wall below concrete or masonary apron using chemical emulsion @2.25 liters per linear meter including drilling and plugging holes with cement morter 1:2 to match the existng floor etc complete all as specified and directed.

M&L for post construction anti- termite of soil / concrete under existing floor along the floor and wall junction using chemical emulsion @ 1 liters per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement morter 1:2 to match the existing floor etc complete all as specified and directed.

M & L for post construction anti - termite treatment at points of contact of wood work using chemical emulision (in oil or kerosin based solution ) @ 0.5 liters per hole by drilling 6 mm dia holes at a down ward angles of 45 degree at 150 mm center to center and sealing the same with white cement and making good to the existing surfaces etc complete all as specified and directed.

Removing and cleaning existing vegetation growth in Structural & Non Structural members, shall be done by uprooting the tree projections of any girth, depth etc from members, cleaning roots and other plant extracts from the members, filling the voids in structural elements shall be done by cleaning the voids, cutting with concrete cutter to retular shape, applying polymer modified mortar 1 :4 propostion with addition of specified polymer 20% by weight of cement, finishing with spatula to build up section of the member complete all as specified.

S&F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or labouratory with plugs, washers, and wastes. including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste, pipe complete all as specified and directed.

S & F in repairs stainless steel plated rack of overall size 75 x 75 Cm made out of 0.8mm thick SS sheet, with shelves and racks to hold kitchen utensils such as plated, tumblers, bowls and cutlery etc with edges of racks and shelves turned in, including fixing to wall iwth brass chromium plated screws as directed, plate rack of design and quality as approved and directed.

Dismantling of boarding ,any description and in any position complete all as specified and directed

M&L for 18/19mm thick prelaminated particle board with teak wood beading, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws for kitchen cabinets or shelves, drawers of any shape and size having particians(vertical or horizontal) including fixing with screws and fixing of all necessary fittings like hinges of any type, Handles rollers or shelves, magnets. etc. to timber complete all as specified and directed.

M&L for 2nd class hardwood moulding n. exc 6 sqcm as in cornices, picture rails and the like such as in prelaminated particle board complete all as specified and directed.

Supply only stainless steel roller of size 25mm x 12mm, 505mm length suitable for baskets complete all as specified and directed.

Supply only Magnet of suitable size fixed for cabin leafs, drawers etc complete all as specified and directed.

S&F continous (piano) hinges, 40mm wide mild steel, bright finish or electro-galvanised complete all as specified and directed.

S&F 150mm size hasp & staple, aluminium anodised, safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets and tube light fittings etc, removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc complete all as specified and directed.

Taking down main switches DBs with sheet metal enclosure 2/4/6/8 way SPN/TPN/DBs,Meter Boxes etc complete all as specified and directed.

Taking down of existing ceiling fans, opening / dismantling of fan& fan blades, cleaning, servicing,oiling, greasing, carrying out repairs such as replacement of capacitors, bearings, bushes, canpoy, condensor, clamp, safety pin, rubber bush and reassembling the fan & fan blades,, connecting up, testing and re-fixing of the same ceiling fan of any sweep including provision of new cable from ceiling rose/ connector to fan and spray painting of ceiling fan with two coats of synthetic enamel paint after prepartion of surfaces,complete all as specified and directed

Taking down of existing exhaust fan 300 mm size (12") A C single phase 230 Volt and deposting the same to MES store yard complete all as specified and directed

M & L for point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light point/fan point controlled by one one way switch, complete all as specified and directed

All as per item No 130 above but for one 5 pin socket 5 Amps on same board complete all as specified and directed

All as per item No 130 above but for one 5 pin socket outlet 05 Amp independent board complete all as specified and directed

All as per item No 130 above but for one bell point controlled by 5 Amps bell Push complete all as specified and directed.

M & L for point wiring complete with proper colour coding using 1100 volts grade, 2.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc. also inclduifng 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one 5Pin,6/16Amps,Socket outlet independent,complete all as specified and directed

M & L for point wiring complete with proper colour coding using 1100 volts grade,4.0 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc. also inclduifng 4.0 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for A.C Point Metal Socket outlet independent,complete all as specified and directed

S& F of Telephone wiring complete with 0.40 Sqmm nominal area PVC flexible telephone core solid copper conductor cable unsheated in and incld concealed non metalic rigid PVC conduit 20mm dia ISI marked incld fittings acceories and incld sunken MS terminal box suitable for mounting Telephone shocket 2 pin complete all as specified with 3 mm thick Ms plastic sheet cover all as specified and directed.

Supply & Fix Three pin Plug & Socket with Plastic enclosure with 2 pole and Eathing for incorporating 20 A SP MCB For A.C Control complete all as specified and directed.

Supply and fix in replacement of call bell AC, 230 Volts single pole all as specified and directed.

Supply & fixing ceiling rose , surface bakelite 3 terminal complete all as specified and directed.

Supply & fixing modular fan regulator,120W- 2 module complete all as specified and directed.

Supply & fixing switch modular type 6 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing switch modular Bell push 6 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing switch modular type 16 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing socket modular type 6 Amp 2/3 pin single pole one way 230 Vcomplete all as specified and directed.

Supply & fixing socket modular type 16 Amp 2/3 pin single pole one way 230 V complete

Supply & fixing Modular white cover plate with frame 8 Module complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 3 Module complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 2 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 8 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 3 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 2 Module complete all as specified and directed.

Supply and fixing integrated sleek extruded LED channel with acrylic cover 20 watt with white light including with driver and prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected.

Supply & fix exhaust fan 300 mm sweep, 900 rpm, 230V complete with louvers, steel body, bolts, nuts, washers, suitably embedded in wall(include wall cutting for hole) with provisioning of 23/0.0076 flexible three core wire for electrical connections from ceiling rose to fan complete all as specified and directed.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces complete all as specified and directed.

M&L for sub main wiring complete two run of size 1.5 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed.(For Building security Lights) Note: Three run 1.5 Sqmm PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.

M&L for sub main wiring complete Two run of size 10 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 10 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed. Note: Three run 10 Sqmm PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.

Supply and fix in repairs sheet metal enclosure powder painted MCB DB TPN 415 Volts 4 way double door with 200 Amps rated bus bar din rail neutral link with suitable for MCB TPN as incomer and concealed in wall complete all as specified and directed.

Supply & fix sheet metal enclosure powder coated for MCB DB SPN 12 way double door with din rail and bus bar including making good to the disurbed surface matching with the existing complete all as specified and directed.

Supply and fix MCB 415 volts 16 KA TPN 63 Amps fixed type complete all as specified.

Supply and fix MCB SPN 240 volts 40-63 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed.

Supply and fix MCB SP 240 volts 40 Amps breaking capacity 10 KA 'B' Series rating complete all as specified and directed.

Supply and fix MCB SP 240 volts 6 to 32 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed.

Supply & fixing street light of capacity 15 watt with IP 65 protection for external outdoor lightning Including 50 mm dia GI Bracket with 45 degree Bend with Nut bolts Fixing on Building Surface Wall complete all as specified and directed.

Supply and fixing in replacement of double door type CRCA Sheet Powder coated made meter box(approx Standard size 50 cm x 50 cm) with Front Disply Transperent Glass ISI Make suitaible for 4 single phase meter all as specified and directed

Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 32X6 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.

Deduct Credit for Demolished/ Dismantled material (-) Rs. 27284.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

GAJANAN SALES CORPORATION

M/s Mukesh Engineers

Shah Enterprises

Srishti Construction

mp construction co