Replacement and modification of existing electrical Panels and other misc. electrical works for Mini Data Centre at Microwave Building, Rajinder Nagar, New Delhi

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Group C

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

6 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

5/6 amps socket

15/16 A switch

6 pin 15/16 A socket outlet

2 way 5/6 A switch

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB distribution board, 15 V, on surface/ recess, complete with tinned copper bus ar, neutral bus bar, earth bar, din bar, nter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator

8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

150 mm width x 50 mm depth x 1.6 mm thickness.

300 mm width x 50 mm depth x 1.6 mm thickness.

Supply and fixing of following type exhaust/ wall/ ceiling/ pedestal fans suitable for operation on 230V, 50 Hz single phase AC Supply i/c dismantling/ refixing, minor civil works if required. making connection testing and commissioning etc. complete as required. (Make: Crompton/ Bajaj/ Almonard/ Havells/ Usha/Orient)

400 mm sweep wall fan

1400 mm sweep ceiling fan

Providing, Installation, Testing & Commissioning of energy Efficient Ultra modern fully diffused recessed mounted 1'x4' 36 W LED luminaire having (5 year warrantee) the following specifications i/c disconnection and dismantling of existing fitting from ceiling etc. complete as required in all respect to the entire satisfaction of Engineer-in-charge: - a) 36 Wattage b) System lumens efficacy : Not less than 110 lumen per watt c) Driver efficiency : Not less than 85% d) LED Life : Not less than 50000 hours @ LM 70% e) Colour temperature : 5500 - 6500 K fh) Operating voltage range: 160 Volt to 270 Volt f) Material of construction for housing: Aluminium die cast g) Material of construction for cover: Toughened and shatter proof in build lens. h) Electronic Driver: Integral type (Constant current supply) i) Internal surge protection : Not less than 10 kV j) Ingress protection (IP): Not less than 66. (Make: Phillips, Havells, Wipro)

Providing, Installation, Testing & Commissioning of energy Efficient Ultra modern fully diffused surface mounted 2'x2' 34/36 W LED luminaire having (5 year warrantee) the following specifications i/c disconnection and dismantling of existing fitting from ceiling etc. complete as required in all respect to the entire satisfaction of Engineer-in-charge: - a) 34/36 Wattage b) System lumens efficacy : Not less than 110 lumen per watt c) Driver efficiency : Not less than 85% d) LED Life : Not less than 50000 hours @ LM 70% e) Colour temperature : 5500 - 6500 K fh) Operating voltage range: 160 Volt to 270 Volt f) Material of construction for housing: Aluminium die cast g) Material of construction for cover: Toughened and shatter proof in build lens. h) Electronic Driver: Integral type (Constant current supply) i) Internal surge protection : Not less than 10 kV j) Ingress protection (IP): Not less than 66. (Make: Phillips, Havells, Wipro)

Making Modification in existing MV Panel suitable for working on 415 Volt, 50 Hz AC Supply including making modification to fit following electrical accessories, dismantling of old existing electrical accessories, i/c painting , sign writing, making arrangement of fixing of new ones including Testing Commissioning etc. as required. 400 Amp FPMCCB 50 K - 02 No. (Make: M/S L & T, Havells, Schneider) 250 Amp FPMCCB 35 K - 02 No. Electrical & Mechanical interlocking - 02 Job 400 Amp TPN Aluminium Bus bar Set - 01 Set

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

400 A,50KA,FPMCCB

400 A, 35 KA,TPMCCB

250 A, 35 KA,TPMCCB

100 Amp TP MCCB 25 K

R-Y-B Led indicating lights

Supplying & Laying following size of PVC insulation PVC seethed Aluminium conductor armoured cable of 1.1 KV Grid in the existing duct, Cable Tray, on the surface of wall including making connection and interconnection testing etc. complete as required.

3.5 X 95 Sq mm cable

3.5 X 185 Sq mm cable

3.5 X 240 Sq mm cable

Earthing with chemical earthing electrodes to meet desired earth value fabricated with copper pipe of 3 Metre long & 50 mm dia. completely filled & packed with highly conductive crystalline and anti-corrosive chemical mixture to retain moisture for a longer period and inserted the inner copper strip having size 50 mm X 6 mm throughout the main pipe along with termination arrangement with suitable hole for outlet connection i/c excavation of pit refilling and providing unnecessary enclosure with cover plate having lockable arrangement, testing etc. completed as regd.

Providing and fixing of rubber mat of size 2mtrx1mtr of thickness 10mm at each panel suitable for 11KV substation and LT panel etc. complete as required(M/S Jyoti, Dunlop, ISI mark)

Less credit for dismantled electrical material, which shall be property of the contractor (-)

Note:- 1. The GST / other Input Tax Credit (ITC) taxes shall be quoted by the firm as applicable as per latest amendments of GST Rules. 2. The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit. 3. Servicing Scrap items will be credited to the firm. The rate may be quoted accordingly. 4. Bidder must mandatorily quote for all GST components (CGST, SGST, and IGST) as required. 5. If annual maintenance contract charges are required to be quoted as per SOW, basic charges should be shown in column 4 & the Goods and Service Tax (GST) in column 7 to 12. 6. The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services. 7. In case, dealer is registered under compounding scheme or any rule/notification where the BSNL is not eligible for input tax credit then the bidder should not disclose any amount in column 7 to12 & 14. 8. % age Rate of FF & Packing should be shown of basic unit price excluding all taxes & charges (i.e. as %age of col.4). 9. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc. 10. Bidder must mandatorily mention HSN & SAC numbers.15. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST. Declaration by Bidder: 1. We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date. 2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 14 above are admissible as per GST Laws. Name of bidder: Seal of Company:

continental electricals

M/s ROHIT ENTERPRISES

pawan enterprises

kashyap electricalsd

STAR ELECTRIC WORKS