PROVN OF CENTRAL CAR PARKING IN BS MARG AND OTHER SANCTIONED WORKS IN AREA OF AGE BR-II UNDER GE (EAST) LUCKNOW.

Amount

Demolition PCC flooring (un reinforeced) of any description and any position as in flooring plinth protection etc complete all as specified and as directed.

M&L for 100mm thick cement concrete type B-0 1:2:4 (using 12 mm graded crushed stone aggregate) complete all as specified and as directed.

M&L for 50mm thick PCC 1:3:6 type C-1 using (20mm graded stone Agg) as in plinth protection finished complete including forming joints in 2 mtr inetrvals and filled with bitumen mastic complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

M&L, brick work with fly ash bricks modular, straight or curved on plan exc. 6.0M mean radius, built in cement mortar 1:6 complete all as specified and as directed.

All as per Item No-5 above but except bricks .

S&F for providing precast cement concrete Type B0 1:2:4 using (12.5mm graded aggregate) louvers & jallies, 35mm thick, including all mouldings but excluding frame (Precast frame shall be measured and paid separately) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles, joint free 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors with borders, incl over 15mm thick screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors complete all as specified and directed.

M&L for glazed ceramic tiles coloured in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed with white cement to match incl with motif/borders as in vertical surface incl over 10mm thick rendering in CM 1:3 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor, aprons etc complete all as specified and directed.

M&L,18mm thick green marble, work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like laid over 15mm thick screed bed in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite stone including polishing complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for machine cut kota stone slab in skirting/dado 18-20 mm thick over 10mm thick rendering in CM 1:3 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc), corrugated translucent sheeting sheets in roof covering complete all as specified and directed.

S&F for Pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F for Pre-laminated galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling timber scantlings framed work 40 sq cm & over in section, in any position complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connnected to common rafters and running rails etc conf to Fe 410- W complete all as specified and directed.

Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area not exc 1.50 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description area not exc. 1 sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description area exc 2.00 sqm each and removing from site complete all as specified and directed.

Taking down door shutters of any description area exc 1 sqm but not exc 2 sqm each rescuring or easing & adjusting of shutter and refixing in same opening complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm , including taking down old wiremesh complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed.

M&L 19/20 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed as in repairs, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws, complete all as specified and directed.

S&F for stainless steel butt hinges medium weight 100mm size complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm size alumium alloy handle, fabricated type extruded section complete all as specified and directed.

S&F 100mm size alumium alloy handle, fabricated type extruded section complete all as specified and directed.

M&L for preparation of previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetc enamel paint over a coat of pink primer complete all as specified and directed.

S&F for 140mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plate plates rails braces etc complete drilling for fixing of steel sheeting or other covering materials or welding complete all as specified and directed including fixing, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & as directed.

S&F in repair viterous china Wash Hand Basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.

S & F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ), with grating and union for discharge pipe including provding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement, complete all as specified and directed.

S&F PVC connection of 15mm bore, 450mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S & F for 15mm bore GI Tubes, ‘medium grade’, galvanished with all fitting; & fixed complete to walls & ceilings or laid on floors including taking up or down existing GI tubing and connections complete all as specified and directed.

S & F for 20mm bore GI Tubes, ‘medium grade’, galvanished with all fitting; & fixed complete to walls & ceilings or laid on floors including taking up or down existing GI tubing and connections complete all as specified and directed.

S&F in repair long body 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed.

S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed.

S&F in repair 32mm dia HDPE pipe for WHB, sink waste/drain pipe fixing with clamps, complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling of existing water tanks of complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete, all as specified & directed.

Dismantling of wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L of anodized aluminium snap grid size 605x605mm of frame work for false ceiling complete all as specified and directed.

S&F for E-board `Everest` or equivalent make 600 x 600 mm and 12mm thick white prelaminated sett embosed reinforced designer as approved ceiling board/tiles at any height complete all as specified and directed.

Taking down of cement plaster in any description on brick or stone wall etc, incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or on concrete surfaces in CM 1:6 finished fair and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on otherthan fair faces of brick work or on concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of OBD over 3 mm thick wall care putty on walls complete all as specified and directed.

Removing complete existing treatment and preparation of old surffaces by brooming down or steel wire brushinng scraping moulds,moss and effloroscent salts & trading oil and greasy spots to wall including cornices etc plastered or unplastered surfaces (old decorated surffaces) and applying two coats of OBD over 03 mm thick wall care putty on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint, complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down & stopping of painted surfaces and applying two coat of cement base paint, complete, all as specified and directed.

M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Taking down existing aluminium door shutters from frame carefully replacement of rubbers bushes, washers including greasing and oiling complete and refixing the door shutters into the same openings and making complete functioning of Aluminium door of any sizes, complete all as specified and as directed

S & F for stainless steel kitchen plate rack of overall size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.63 mm thick fixed with rawl plug and CP steel screws complete, all as specified and directed. Make : Blue Star (Silver Shine), Diamond, Nirali, Prayag.

Surface excavtion not exc 30cm deep and avg 15cm deep and getting out soft/ loose soil complete all as specified and directed.

Excavtion in post holes (or similar holes ) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken ribble mixed with earth around in layers not exc. 25cm complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm stone aggregate as in foundation filling complete all as specified and directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavation material not exc. 50m and deposited where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Hard core of gauge not exc 63mm ( using broken stone or boulder ), depoisted, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface.

M&L for 75mm thick PCC 1:4:8 Type D-2 ( using 40mm graded agg ) as in sub base of floor complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 Type B-2 ( using 40mm graded agg ) as in sub base of floor complete all as specified and directed.

S&F steel work for post including gusset plate of suitable size welded at both ends for anchoring and for fixing of purlin and rafter including special shaped washers etc complete all as specified and directed.

M&L for one coat of primer paint over new steel surface and applying two coats of synthetic enamel paint incld preparation not exc. 10mm width or girth complete all as specified and directed.

M&L for 60mm thick pressed precast concrete interlocking paver block reflective type, rubber moulded coloured of M-35mm grade over 25 mm thick sand cushion as in floors complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified & directed.

M&L for point wiring one light / fan point controlled by one, one way switch 06 Amp with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic ISI PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per srl item No 80 here-in-before but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 80 here-in-before but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per Serial Item No 80 here-in-before but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

S&F switch piano flush type, single pole, one way, 05 Amps complete all as specified & directed.

S&F socket outlet 2 in 1, 3 pin, 05 Amps complete all as specified & directed.

S&F switch socket combination 2 in 1, 3 pin, 05 and 15 Amps, flush type, universal complete all as specified & directed.

S&F stepped type, electronic fan regulator, flush and socket type on the existing phenolic laminated sheet humfree 2 module ISI marked etc as required complete all as specified & directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified & directed.

S&F in replacement of single side connection LED T8 tube rod 20 Watt with PC body and diffuser, >2000 lumen, 6500K of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as directed. Make : Havells / Philips / Crompton.

S&F ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified directed.

M&L for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

S&F in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

S&F exhaust fan single phase 230/240 volts heavy duty metal body of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified and directed. Make/Model:- Havells Turbo Force SP 1400/ Orient 300 mm Heavy Duty/ Bajaj Heavy Duty Maxx Air

Cutting walls any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part I - 2009 and connected to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

M/S S S A ASSOCIATES

M/S KAUSHIK CONSTRUCTION

kaushalya construction

m/s raghubar dayal

Supreme Builders

M/S PRATAP BUILDERS

R P construction company